Stroj za robne trakove

LOHMEYER 735 S IQ

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Features and technical data: - Round pot glue unit - with second glue unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: two motorized saw units for front/end cap trimming - Top/bottom milling: two milling units with copying wheels for radius or chamfer work - Radius scraper: pneumatically controlled, for reworking radii - Surface scraper: for smoothing the edge surfaces - Polishing unit: two buffing wheels with motors for final finishing - Riepe spraying device Djdpoyqanbsfx Abgeuw - Control: PLC with operator panel - Replacement of the feed frequency inverter by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Nominal power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² power cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short term Location: Röllbach

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Panel dividing system PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year limited warranty Technical specification: Left-angle stop according to AGA 4383 Longitudinal cutting saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (continuously variable via potentiometer) Djdpfx Asxhg Ibebgeuw - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable externally (without opening the safety guard) - Saw unit with regulated DC drive: - Precise positioning (e.g. for cut-outs) - Slowed withdrawal from the cut - Includes safety guard interlock, lamella curtain SZ 5008 - Offcut cutting device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (separable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE-compliant Angle pressure device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material feed table HP 5021 (rear-mounted to FM 16): - Parallel stop with 6 spring-mounted clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard disk - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connection (including wireless LAN) - Optimize cutting plans in office and send directly to the machine - Multitasking capable - Printing function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling operator console - Graphical display of cutting plans and workflows Additional equipment: Angle stop table HP 5043 (front side): - Machined steel angle, Pertinax table surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Pertinax surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 tapered (for scoring saw)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Stroj za zapiranje Arol Closys Eagle VP je nepogrešljiva rešitev za podjetja, ki želijo optimizirati svoj proces vakuumskega pakiranja. Omogoča učinkovito in hermetično zapiranje kozarcev s premerom 84 mm ter zagotavlja optimalno ohranjanje izdelkov. Zaradi napredne tehnologije omogoča popoln vakuum v notranjosti posod, kar podaljšuje življenjsko dobo živil in ohranja njihovo kakovost. Poleg tega je opremljen z žirafo za avtomatsko nalaganje pokrovčkov, kar poenostavi postopek in poveča produktivnost. Stroj za zapiranje Arol izstopa po svoji zanesljivosti in robustnosti, kar omogoča dolgoletno uporabo. Prav tako se enostavno integrira v obstoječe proizvodne linije in omogoča nemoten prehod. Uporaba stroja je preprosta in intuitivna, kar zmanjšuje čas usposabljanja osebja ter poveča učinkovitost, ne da bi ogrozili kakovost končnega izdelka. Tako lahko podjetja povečajo svojo konkurenčnost na trgu. Z izborom zapiralnega stroja Arol izberete preizkušeno rešitev, ki je v različnih industrijah v uporabi že od leta 2011. Ustreza strogim zahtevam glede higiene in varnosti živil. Skratka, ta kapsulirni stroj je idealno orodje za povečanje učinkovitosti vaše pakirne linije ob hkratnem zadovoljstvu vaših strank. Tehnične lastnosti: Premer kozarcev: 84 mm Vakuumska kapsulirka Avtomatsko nalaganje pokrovčkov (žirafa) Leto izdelave: 2011 Duodpfx Abeu Nwiyjgow

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Na prodaj: rabljeni stroj za lepljenje robov BRANDT KDF 440 C skupine HOMAG. Letnik izdelave: 2017 Enota za poravnavo robov Lepilna enota Tlačna cona Čelilna enota (2-motorna) Večstopenjska rezkalna enota Oblikovalna rezkalna enota / kopiranje vogalov (1-motorna) Dujdpfx Abjzc D D Degew Profilni in ravni strgalo Polirna enota Pomik: 14 m/min Možna uporaba EVA & PUR Krmiljenje PoweTouch PU zgornji pritisni valji Malo delovnih ur Na voljo od junija 2026 Zelo dobro ohranjena.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, OTT Tornado FÜ + PU SPS-compatible control, 7" TFT touch color display CM-CombiMelt for EVA and PUR hot-melt adhesives Pre-milling unit - edge jointing Fully automatic roller magazine Fully automatic edge magazine Pneumatic flush trimming 0-3° Flush milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounding Radius scraper Surface scraper Soundproof enclosure with central extraction Cleaning set with 4-way spray unit, fine buffing device, and glide spray unit First delivery in 2006 Machine is WORKSHOP TESTED and in TOP CONDITION The gluing unit has recently been completely serviced and all wear parts replaced Technical Specifications: Edging thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed rate: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm End trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner copying unit Scraper Buffing unit Dedpfx Abev Sm Hcsgeuw Triple sprayer Total power: 17.5 kW Dimensions: Length: 6,180 mm Width: 1,770 mm Weight: 3,100 kg - Immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Naprodaj je robna lepilka tipa Brandt KDF 660. Duedpfx Absyhqa Nsgow

Stanje: dober (rabljeno), Leto izdelave: 2011, Single-sided edge banding machine, right-hand version, with workpiece return system for hot-melt glue and/or PU gluing, used, year of manufacture 2011; approx. 8,700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Min. width: 70 mm, Min. height: 8 mm, Max. height: 60 mm, Min. length: 150 mm Feed speed: 14 – 20 m/min, infinitely variable Glue application: Glue application roller with Vario-melt dosing automation Working height: 900 mm Machine dimensions: Height: 1,600 mm, Width: 1,100 mm, Length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: - Double pressure roller unit with electronic positioning - Pneumatic control of all units from the central touch-screen panel via Beckhoff industrial PC - CM – CombiMelt gluing system: Processing units: - Fk – Jointing unit for edge processing of particle boards with 2 HF motors 2.2 kW, 200 Hz, 12,000 rpm, working in both directions, path controlled. Dedozb Iuqjpfx Abgsuw Tool: DIA jointing cutter set Ø 85 x 45 x 30, z=3, for panel thickness up to 42 mm - AKM – Edge magazine for automatic feeding of strip edges, with spiked roller feed and pneumatic pressure beam. Including optical edge monitoring - M4+1 – Fourfold magazine Automatic roll retraction. Holds four edge rolls. With variable edge chute for quick edge changes. With automatic selection menu. - K 13 – DOUBLE END TRIM UNIT with 2 HF-motors 0.6 kW, 200 Hz, 12,000 rpm, motors and saw blades pneumatically tiltable 0/5° - K 160 – 2 HM SAW BLADES 140 x 3.2 x 16 mm, Z 36 - Bfc – FLUSH MILLING UNIT for pre-milling of applied edges, operating against feed direction. Single-sided sensing, adjustment via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, z 4 (HF70). - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide reversible tip heads Ø 70 x 20 x 16 mm, Z 4 (HF70), optionally also equipped with radius tools - HFt – FINE MILLING UNIT for radius milling of applied edges, operating against feed. Double-sided sensing, automatic edge thickness adjustment via program control. 2 HF motors 0.3 kW, 200 Hz, 12,000 rpm Tool: 2 carbide radius reversible planer heads (AR 73), Ø 73 x 16 x 16, z 3 for R1 – R3 inserts. - AKF – AUTOMATIC CONTOUR TRIMMING with two separate work spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12,000 rpm Tool: 2 PCD diamond radius cutters Ø 73 x 13 x Ø 16 With integrated dust extraction. - AZK 4 – automatic SCRAPER CHANGER UNIT - ZKf – SURFACE SCRAPER UNIT with fine-sensing device for residual hot-melt glue removal on the joint area – with extraction. Additional equipment: - AS – Antistatic spray unit, double, on the glue joint - GS – Glide spray unit for applying antistatic lubricant to the edge surface, electronically controlled - RS – Cleaning set with 4-fold spray unit and fine buffing device for surface cleaning - KEO-c – EDGE POLISHING UNIT, oscillating and automatic feed. 2 motors 0.2 kW, with 2 cloth wheels - WE – Angle infeed aid as folding pusher slide, for narrow parts. Interface for workpiece return system Ligmatech ZHR 05 or equivalent

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Ott robni lepilni stroj model EUROMATIC-FÜ Dsdpfxey S Rz Ae Abgjuw - Letnik 2003 - BL-F avtomatsko vhodno vodilo, ogrevano - FÜ – lepilna enota - KM avtomatski magazin za robne trakove - RM-V avtomatski magazines za kolute - Lepljenje 0,4–15 mm - Predgretje robnega traku - K16 – dvojna enota, nastavljiva za 15°, žagine plošče 140x3,2x16 - HF 10.1 enota za poravnavo zgoraj in spodaj, vključno z orodjem - HFF – enota za posnemanje zgoraj in spodaj, vključno z orodjem - HFR – zaoblitvena enota zgoraj in spodaj, vključno z orodjem - AR 4 – 4-motorna enota za kopiranje vogalov, vključno z orodjem - ZK – profilna strgala, vključno z orodjem - KE-G – stroj za končno čiščenje robov - ZKF – strgala za površine, vključno z orodjem Stroj je še vedno mogoče ogledati in preizkusiti pri stranki.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine in full configuration, including a total of 3 interchangeable gluing units, 1 of which is for PUR adhesive. Material dimensions: Roll materials: - Paper and plastic edging 0.3 - 3.0 mm - Veneer edging: 0.5 - 3.0 mm - Strips 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Duedpfsybbayjx Abgjw Machine equipment: Infeed fence, adjustment automatic via program Separation agent application unit Jointing milling unit with 2 motors, each 4 kW Air nozzle for removing loose particles Gluing unit with glue container 1.8 L, with QUICK-LOCK system with single roll / strip magazine 1 main pressure roller and 3 follow-up pressure rollers Pressure zone adjustment automatic via program End trimming unit with 2 motors 660 W, swiveling 0 to 8 degrees Profile trimming unit with 2 motors 180 W and 2 motors 400 W max. workpiece thickness 60 mm max. feed speed 20 m/min. Automatic adjustment via program Profile scraper unit Glue joint scraper unit Cleaning agent application unit Buffing unit with 2 motors 180 W Control: ICOS open TS, PC-based