Drobilnik z eno gredjo

LINDNER Recyclingtech Jupiter 2200

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 25.000 h, Funkcionalnost: popolnoma funkcionalen, dolžina rotorja: 2.200 mm, vrtljajska hitrost (min.): 58 obr/min, skupna masa: 30.000 kg, moč: 220 kW (299,12 KM), vhodna napetost: 400 V, Desfibradora de eje único robusta de baja velocidad, adecuada para la pretrituración de una amplia variedad de materiales sin la presencia de grandes contaminantes. Aplicación: Trituración de residuos industriales y comerciales, películas, materiales de embalaje, textiles, papel, caucho, madera de demolición, palets, bobinas de papel, tambores de cable, plásticos mixtos para recuperación térmica y de materiales, sueltos o prensados en balas. Lindner Jupiter 2200 Potencia de accionamiento: 2x 110 kW (ABB) Ihjdpjw Tk E Asfx Af Tjt Casete de criba curva: 148 mm Armario de control: completo con (FU-ABB) Refrigerador de recirculación: Sí, incluido Abertura de trabajo: 2190 x 1750 mm Volumen de llenado: aprox. 5 m³ Longitud del rotor: 2190 mm Circunferencia del rotor: 745 mm Velocidad del rotor: 50Hz: 58 rpm Número de cuchillas de rotor: 24 uds Dimensiones de cuchilla, cuchilla de punta: 145x145x47 mm Contracuchillas inferiores: 6 uds Peine rascador superior: 6 uds Alimentación hidráulica: 11 kW Peso: aprox. 30 t Dimensiones LxAnxAl mm: 5300 x 3260 x 3090 mm Tolva: incluida Plazo de entrega: inmediato

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 44.000 kg, dolžina rotorja: 2.800 mm, moč: 315 kW (428,28 KM), največja hitrost vrtenja: 87 obr/min, - MERAK 2800-2 with 315 kW Ihjdpjugf Dwofx Af Tst - 116PR cutting system - PG190 screen (can be changed according to customer requirements) - Feed hopper - Dust suppression - Electric central lubrication - Hydraulic circuit protection - Overband neodymium magnetic separator – HP - Rubberized, bolted track pads on crawler chassis

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Ihedpfx Aepn I H Tof Tot Znamka: Svedala Tip: 36/H/MC Vklj.: osnovno šasijo in oljno enoto

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Ihedpfxod E A I Ij Af Tst Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Ihedpfx Afjvwlqqe Tst Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 239 kW (324,95 KM), skupna masa: 50.500 kg, Leto izdelave: 2002, obratovalne ure: 11.245 h, številka stroja/vozila: CCC00513, 239 kW Weight: 50.5 t Engine completely overhauled Undercarriage as good as new Ihedpfjlhqhmjx Af Tjt Track width: 600 mm New cylinder seals

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Skoraj nov sekalnik Vecoplan VTH 250x650 HxB Moč: 75 kW Cassel detektor kovin Ijdextif Hjpfx Af Tjht Približno 40 tekočih metrov vibrirajočih žlebov

Stanje: dober (rabljeno), Leto izdelave: 1998, Pallet nailing machine P+K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding stamp Positioning table Iodpjuzh Anofx Af Tsht Portal stacker Pallet size: 600x800 - 1200x1400 mm

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Ihodpfxjh Nyfyo Af Tst Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495.

Stanje: dober (rabljeno), Leto izdelave: 1990, 4-gredni drobilnik priznanega proizvajalca Untha, tip RS 30. 2 x 7,5 kW. Na drobilniku je bila pred tremi leti obnovljena menjalnik in nameščeni novi rezalni diski. Od takrat skoraj ni bil v uporabi. Stroški popravila so znašali 5.300 €. Isdpfx Afoxpn Hno Teht