Stroj za rezkanje zobnikov - vertikalni

LIEBHERR L 1502-S

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring Iaedpfx Aexp Hmajf Tol - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61373, It is in working condition. Iajdjvwlf Ijpfx Af Tjl

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Iajdsiw Dlkjpfx Af Tsl Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Iajdpfx Aohq Uigof Tsl Maks. hitrost podajanja: 1 – 30 m/min Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Vreteno: 88 mm Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, Iaedpjul Efmsfx Af Tol high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° Iodpfewlvlgjx Af Toal SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Leto izdelave: 2008, Premer kolesa - maks. 300 mm Modul - maks. 8 Modul - min. 0,7 Krmiljenje SINUMERIK 840 D Kot delnega stožca - min./maks. - 90 / + 90 ° Vreteno delovnega predmeta - izvrtina 127 mm Premer brusnega kolesa 50 - 230 mm Število vrtljajev brusnega vretena brezstopenjsko 7.500 U/min Število vrtljajev vretena obdelovanca 700 U/min Skupna potrebna moč 146 kW Teža stroja pribl. 21 t Prostorska zahteva pribl. 9,5 x 3,6 x 3,1 m Merilna sonda za zobno režo (integrirana v brusno glavo) Zunanja brusilna vretena - naprava za hlajenje Odsesavanje oljne megle ELBARON (integrirano v stroju) Filtrirni sistem hladilnega sredstva Hoffmann Uporabljalo se je za serijsko proizvodnjo spiralno zobatih krožnih zobnikov Brez vpenjalnih sredstev Iedpfx Afevxww Se Tsal Brez brusnih koles / prirobnic za brusna kolesa Brez diamantnih rezil

Stanje: rabljeno, Leto izdelave: 2007, Wheel diameter – max. 500 mm Hypoid adjustment ±70 mm Axle cross angle 90° Y-axis distance 150 – 350 mm Z-axis distance 120 – 340 mm Speed range – stepless 0 – 5000 rpm Spindle torque 57 Nm Taper 99.2 mm Drawbar force – tool clamping 23,000 N Braking torque max. 93 Nm Total connected load 20 kVA Total power requirement 15 kW Machine weight approx. 6 t Space requirement approx. 2.35 x 2.24 x 2.5 m Working area: Crown wheel diameter max. – 500 mm Hypoid adjustment X (v) – ±70 mm Axle angle – 90° Distance Y-(H) axis crown wheel/flange pinion spindle – 150 ... 350 mm Distance Z-(J) axis pinion/flange crown wheel spindle – 120 ... 340 mm Pinion spindle head: Speed range, stepless – 0 ... 5000 rpm Torque – 57 Nm at n = 0 ... 1240 rpm Torque – 54 Nm at n = 1240 ... 5000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) Drawbar force for tool clamping max. – 23,000 N Crown wheel spindle head: Speed range, stepless – 0 ... 3000 rpm Torque – 95 Nm at n = 0 ... 750 rpm Torque – 93 ... 24 Nm at n = 750 ... 3000 rpm Internal taper (with adapter) – Ø99.2 mm (#39) / (Ø35.6 mm (#14)) Drawbar force – max. 23,000 N Iodsukitxjpfx Af Toal Max. crown wheel braking torque – 93 Nm up to 3000 rpm pinion speed at i = 1:4 Max. crown wheel braking torque – 93 Nm up to 1200 rpm pinion speed at i = 1:1.6 Max. crown wheel braking torque – 59 Nm up to 1200 rpm pinion speed at i = 1:1 Electrical: Total connected load – 20 kVA (machine effective power) Voltage – 3 x 400 V (others on request) Voltage tolerance – ±10% Frequency 50 Hz (others on request)

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. Ijdovr Eh Espfx Af Tjal • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, Wheel diameter – max. 180 mm Ijdpfx Afeu Uu S Ts Tsal Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Number of strokes 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Year of manufacture: approx. 1970 Hydraulic clamping in table Change gears