Avto s polpriklopnikom

Lider 1 axle car carrier

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2025, GVN prikolica s 3 osovine, ekskluzivni niskopodni model Bedsqxbcnspfx Afnowi Za više informacija kontaktirajte nas.

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Bwodpfxsh S Aw Re Afnei

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2026, Razpolagamo z vso evropsko dokumentacijo! Bsdpfxoqx Nfgj Afnewi Prikolice lahko dostavimo pod pogoji FOB, EXW, CPT, CFR ali CIF. Če ste zainteresirani, vas prosimo, da nas kontaktirate.

Stanje: novo, konfiguracija osi: 1 os, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, Met de vrachtwagen-trekkertransporter kunt u uw vrachtwagen-trekker snel vervoeren als u onderweg problemen heeft. Deze aanhanger kan zelfs de grootste cabine van elk merk transporteren. Twee lieren aan boord voor het op- en afslepen van de aanhanger. 24 volt, 400 ampère – elke vrachtwagen kan met deze aanhanger rijden, mits voorzien van een NATO-aansluiting. Bedpjm Duc Ujfx Afnjwi Voor bestellen kunt u Mannes bellen. Twente Trucks bedient de wereld.

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 25.100 kg, skupna masa: 36.100 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 215 75 17,5, KALEPAR TRAILER - KLP 334V3 TRUCK TRANSPORTER 3x SAF axles (1st axle: lift axle, 2nd axle: fixed, 3rd axle: steering axle) Gross weight: 36,100 kg Payload: 25,100 kg Unladen weight: 11,000 kg Total length: 13,600 mm + 1,700 mm Bjdpfxskqmuij Afnswi Hydraulic rear extension, length: 1,500 mm Central extension up to 1,700 mm Braking system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Full-width hydraulic rear extension: 2,550 mm wide, 1,500 mm long Trailer fully galvanized (100% galvanized) Tire size: 215/75 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental Fifth wheel height: approx. 950 mm - 1,150 mm (other heights available upon request) 24V 4.5 kW electro-hydraulic motor Steel ramps: 2 units Modifications according to customer requirements possible. Paintwork freely selectable / free of charge. Net export possible. All documents for registration (COC, TÜV, etc.) available.

Stanje: dober (rabljeno), Leto izdelave: 1994, obratovalne ure: 14.000 h, * Dizelski viličar * 14.000 delovnih ur * Nosilnost 16.000 kg * Volvo motor Bwjdpfx Afsw Hydponji * Dvižni steber, višina dviga 5.000 mm * Gradbena višina 4.100 mm * Naprava za nastavitev vilic * Lastna teža 25.000 kg * Takoj pripravljen za uporabo

Stanje: novo, lastna masa: 6.100 kg, največja dovoljena obremenitev: 14.400 kg, skupna masa: 20.500 kg, konfiguracija osi: 1 os, vzmetenje: zrak, velikost pnevmatike: 245 70 17,5, KALEPAR TRAILER - KLP 119V4 4-vehicle car transporter Car transporter semi-trailer for 4 vehicles 1x SAF or BPW axle Gross weight: 20,500 kg Payload: 14,500 kg Bwedpfokqmumsx Afnei Unladen weight: 6,100 kg Total length: 13,600 mm + 1,500 mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension, full width 2,550 mm and length 1,500 mm Semi-trailer fully galvanized (100% galvanized) Tire size: 245/70 R 17.5 Tyre brands: Pirelli, Goodyear, Fulda, Continental Fifth wheel height: approx. 950 mm – 1,150 mm (other fifth wheel heights available) Hydraulic winch, 5 tons, with remote control and guide pulleys 24V 4.5kW electro-hydraulic motor Steel ramp: 2 pieces Modifications according to customer requirements possible. Color freely selectable / free of charge. Net export possible. All documentation (COC, TÜV, etc.) for registration available.

Stanje: rabljeno, Leto izdelave: 1983, 4 × complete spray booths with drying ovens for buses. Fully operational, including all walls/structures and motors/burners. Bwsdowrpwvspfx Afnoi

Stanje: novo, največja dovoljena obremenitev: 31.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, Priekaba Wiese ar trijų ašių važiuokle, kėlimo stalu ir atverčiamu galu. Idealiai tinka šakinių krautuvų ir (arba) darbo platformų pervežimui. Techninės specifikacijos. 3 x 10 t ašys Pakeliama ašis Valdoma ašis su „Smart Steering“ (vairavimas į priekį ir atgal) Išorinio rėmo važiuoklė su nuolydžiu Galinė konstrukcija, tinkama 18 t, pritaikyta 2- ir 3-ašių vilkikams Hidraulinis kėlimo stalas reguliuojamas 3 pozicijose Atverčiamas galas su hidrauliniais išstumiamais elementais, tinkamas naudoti kaip užvažiavimo rampos, pervažiavimo rampos arba kaip pakrovimo platforma (Bendro ilgio sumažinimas pakėlus galą vertikaliai) Nuotolinis valdymas rampoms ir kėlimo stalui Priekinė sienelė Grotelinis grindų paviršius Daug tvirtinimo taškų Bjdjvw Hmtepfx Afnewi „SmartBoard“ sistema Centrinė tepimo sistema Plieninė konstrukcija, cinkuota ir nudažyta Galima įsigyti daugybę papildomų pasirinkimų, pvz.: - Gervė - Įrankių dėžė ant priekabos pakopos - Aliuminiai ratlankiai Daugiau informacijos pagal užklausą.

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. Bwjdpfx Aowzmcbofnei • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.