Distributer Leif & Lorenz B6-1300 mm

Leif & Lorenz B6

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² Hedpjw Dp Ufofx Abhsh - Control cable: 2 × 1.5 mm²

Stanje: rabljeno, No. 3231 Extraction System with Briquetting Press Spänex SHB 50 Hjdpfx Ajwqhwlsbheh Used Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is transferred directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer brochure: Output: 50 kg/h (depending on material) Throughput: 0.45 m3/h Briquette shape: octagonal, 125 x 70 mm Motor power: 5.5 kW Compression ratio: 1:10 Moisture content: min. 8%, max. 20% Sale by customer order, ex location near 69124 Heidelberg, without dismantling, transport, or installation Dismantling, loading, and transport by us available as an option Errors in description and price excepted To avoid any misunderstanding, a viewing on site is possible and recommended by appointment Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; sale is subject to: “bought as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Hjdpjv Umb Eofx Abhjh Inspection possible by appointment.

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Znamka: Kleemann Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Vključuje: Elektromotor Hodpfx Aeu S Tqvobhjh Teža pribl. 38 ton

Stanje: dober (rabljeno), UV curing oven for coating line Hjdpfst Ag Uqjx Abhsh

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Hsdpfxoh A Sfds Abheh Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90° Hsdpfx Abjwhmdfshjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine 4+4 motors Hedpfx Abjvx Afnshoh Opening width 3000 mm Option for complete overhaul available

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we have a wide selection of individual spot welders for steel wires. Hjdpfetvpilsx Abheh

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor Hsdpfeqwyclex Abhjh X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000