Linija za vratne obrobe (okvirje) - CNC

MASTERWOOD + AMS Multitec + Teknomat 3000

Stanje: generalkompletno obnovljen (rabljeno), SCHLATTER MG24 Electro-Welded Mesh Production Line Completely refurbished WORKING RANGE Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 - 1600 mm Distance between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Longitudinal wire spacing: min. 100 mm Cross wire spacing: 25-250 mm Adjustable via cutting device (0-1) Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Basic equipment includes: - 1 Machine frame - 1 Upper support for press reception, infinitely adjustable by handwheel - 1 Magnet supports with holding magnets and monitoring of cross wires - 1 Row of pneumatic solenoid valves for press operation - 1 Air and water supply installation - 2 Pneumatic rotary actuators with oil damping - Static torque at 5 bar compressed air: 480 Nm - Front section continuously adjustable from: 25 - 250 mm, adjustable via cutting device (0-1) - 1 Forward feed carriage with panel lifting device - 1 Tool set for machine adjustment WELDING SECTION includes: 8 Type C transformers Rated power per transformer: 100 kVA Secondary no-load voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal current bridges for wire spacing: 50-100 mm 12 Longitudinal current bridges for wire spacing (for staggered wires): 100 mm Rjdewu Tu Dopfx Ag Tep 10 Longitudinal current bridges for wire spacing: 100-150 mm 8 Longitudinal current bridges for wire spacing (for staggered wires): 150 mm 6 Longitudinal current bridges for wire spacing: 150 - 200 mm 6 Longitudinal current bridges for wire spacing (for staggered wires): 200 mm 24 Lower Cu electrode holders with standard angle electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire holding clamps Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Spacing between longitudinal wires: min. 100 mm Spacing between cross wires: 25-250 mm Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Rsdpfxjh A Sfde Ag Top Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: rabljeno, Leto izdelave: 2009, Max. workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Model: Weinig Conturex 2 C 114 ----- Rodpfxowunwyj Ag Top Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamp tables, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Processing of workpieces exceeding 2,700 mm in length is carried out using a repositioning cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from HSK 63F reference surface: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot spacing: 100 mm Fixed multi-spindle drilling head ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex-location Prices for Dismantling and loading onto customer’s truck Transport within Germany and abroad as well as reassembly commissioning and, if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 in- and outward opening, with fitted weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner joints: mortise/tenon & dowel Technical data as per manufacturer – no guarantee! Detailed technical description available on request!

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Rodpfxowhmdfs Ag Tjp Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- Rsdpfjvu Hfqex Ag Tep > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Rodpfx Agjtvpilj Tjp Additionally, we have a wide selection of individual spot welders for steel wires.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Fully operational, available for inspection in Wadowice X-axis travel: 3060 mm Y-axis travel: 1260 mm Rodpfx Agowpthts Tep Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: novo, Leto izdelave: 2023, moč: 7 kW (9,52 KM), širina skobljanja: 520 mm, število rezil: 4, skupna masa: 483 kg, vrsta nastavitve višine: električni, premer gredi skobeljnika: 120 mm, višina skobljanja: 240 mm, SCM MiniMax s 52es Thickness Planer Specification: • Condition: New • Manufacturer: SCM • Planer table width: 520 mm • Planer table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock: 4 conventional knives • Cutterblock diameter: 120 mm • Cutterblock speed: 5000 rpm • Maximum planing width: 520 mm • Feed speed: 5 / 8 / 12 / 18 m/min Redpfxjqu U Dns Ag Top • Extraction port diameter: 120 mm • Weight (net): approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional Information: • Factory new machine • Actual item condition shown in the pictures • Possibility to test and inspect the machine on-site • Price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Stanje: rabljeno, številka stroja/vozila: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volt 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag Rjdpob Auu Rofx Ag Tsp Location: Ex stock Bitburg

Stanje: rabljeno, Leto izdelave: 2019, Used machine Year of manufacture: 2019 Equipment and technical data: Rjdpfx Agjwka Upo Top - Designed for classic nesting machining with wear plate - Machine frame in welded construction with ground and hardened prism guides for the gantry, spindle head, and consoles - Gantry-type moving bridge - Helical rack-and-pinion drive in X and Y axes; ball screw drive in Z axis for precise positioning - Working dimensions: - Max. clamping surface on nesting table: X = 3100 mm, Y = 1560 mm - Max. travel range: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height on DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed: Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid division - Continuous T-slots in X and Y directions - Slot spacing 50 mm - Includes 25 meters of sealing cord for securing the wear plate - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X-direction, 4 in Y-direction - 32 mm pitch - Maximum drill diameter: 35 mm - Total drill length: 70 mm from mounting end (depends on panel thickness) - Spindle stroke: 70 mm - Reversible rotation (CW/CCW) - n(max): 1000–4400 rpm, stepless - Mount: M10 thread, 11 mm fit - Without tools, without holder - 6 horizontal spindles: - 2 double drilling spindles in X-direction - 1 double drilling spindle in Y-direction - Mount: M10 thread, 11 mm fit - Max. drill length: 63 mm from mounting end - Without tools, without holder - Milling unit 7842: - Power: 12.0 kW (S6 duty cycle) - n(max) = 1000–24000 rpm, stepless - Max. output at 12000–24000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand tools) - With collet chuck for HSK shank - Hybrid ceramic bearings - Max. tool weight: 6 kg (including holder) - Tools: milling and grinding tools up to max. Ø 160 mm - Safety enclosure as per CE standards - Safety fence on sides and rear - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in front machine area - Handheld remote control unit for machine operation with following functions: - Start / Stop machining program - Speed control for machining cycles - Reset button - Manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software—1x machine license comprising: - CAMPUS NC-HOPS: - Graphical parametric system with WOP and CAD/CAM features for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by means of overpressure in each guide carriage