Visokohitrostni štiristranski skobelni stroj

LEDINEK SUPERLES 300 5V-S150

4-sided lamella planer 300 x 120 mm
Podpfowz Nzmex Agpsrd

Feed speed adjustable from 30 to 150 m/min.

Equipment: 2 upper and lower horizontal cutterheads Z 10
2 right and left horizontal cutterheads, Z 10
equipped with jointers.

• Horizontal cutter shaft speed: 5,500 rpm
• Vertical spindle speed: 6,000 rpm
• Spindle diameter (vertical): 50 mm
• Clamping length for vertical spindles: max. 185 mm

Tool diameters:

• Horizontal cutter shafts: 205 mm
• Vertical spindle head tools: 160 – 205 mm

Cutter blocks:

• Surfacing shaft and thicknessing shaft with cutter blocks:
• 2 x planer heads 205 x 330 mm, Z=10 screw clamping
• Planer knives, lamella 3 x 35 x 330 mm
• 2 x hydraulic planer heads 190 x 130 mm, Z=10 screw clamping
• Planer knives, lamella 3 x 35 x 130 mm

• Weight: approx. 13,000 kg
• Machine dimensions (L x W x H): approx. 3,800 x 2,800 x 2,400 mm
• Installed power: 154 kW


Additional units

Bottom scoring saw unit
This unit is used for machining balancing incisions on the underside of processed lamellas with widths over 200 mm. The saw blade is mounted with a flange directly on a flat motor.
The horizontal scoring stroke, actuated pneumatically, is approx. 150 mm (travel between boards, activated by mobile spot sensor). Area adjustment is manual. The stroke length can be read off a counter.
The vertical scoring stroke, also pneumatically actuated, is approx. 30 mm (allowing fast switching during machining between lamellas with and without balancing incision).
End-stop for incision depth is manually adjustable. The stroke length can be read off a counter.
Lamellas must enter the machine individually, piece by piece (no push-through).

Technical data:

• Scoring saw power: 15 kW
• Saw speed: 5,000 rpm
• Arbor diameter: 40 mm
• Max. cutting depth: 50 mm
• Tool diameter: 300 x 4 mm
• Extraction hood diameter: 120 mm
• Additional feed rollers: one above (diameter 240 mm), one below (diameter 240 mm), both toothed and hardened chrome. The scoring saw is delivered with the saw blade included.
• Working area of the scoring saw: from 37.5 up to 225 mm


Motorized side infeed roller
Pneumatically suspended. Motorized width adjustment via buttons. (If spindle positioning with set-point control is provided as an option, the side pressure roller can be adjusted from the control panel). The set width is displayed on a SIKO counter.
• Roller diameter: 190 mm
• Roller height: 40 mm


Automatic jointer for knife equalization
The knife equalization device is fixed-mounted and manually activated.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.