Formier

Leadermac 823 Hypermac

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 150 mm, premer vretena: 40 mm, širina skobljanja: 230 mm, skupna višina: 2.000 mm, skupna dolžina: 7.600 mm, skupna masa: 6.500 kg, število vreten: 8, Leadermac, Hypermac 823 Fgedpfx Aoxmlk Soa Hjk 8 vreten širina skobljanja 15-230 mm debelina skobljanja 10-150 mm minimalna dolžina obdelovanca 200 mm hitrost vretena 6000 obr/min premer vretena 40 mm dovoljen žagin list za vertikalno vreteno 112-232 mm, za horizontalno 100-225 mm podajalna hitrost 6-24 m/min 6500 kg dolžina 7600 mm višina 2000 mm globina 2000 mm 400 voltov navodila v nizozemščini in angleščini

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2022, Prodaja se celotna BSH proizvodna linija. Obrat je sestavljen iz komponent podjetja System TM za dovajanje, tehnologije zobate spone NKT, avtomatizacije HIT (regalno skladišče, transport, popravljalna postaja, dovod lamel, lamelarni skobeljni stroj in Kallesoe itd.). Skobeljni stroji podjetja REX — predskobeljni stroj, lamelarni skobeljni stroj in finiš skobeljni stroj. Visokofrekvenčna stiskalnica Kallesoe. 2 silosa. Fgjdpfx Aaewgccho Hok

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- Fgodpfx Aasrmucxs Hek All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Fsdjlu D Tfspfx Aa Hegk Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Leto izdelave: 2013, Stanje: rabljeno, Drying chamber / Recirculation drying chamber / Timber drying kiln / Drying plant Mühlböck VLSM2120 External dimensions: Length: 7.1 meters Width: 4.4 meters Height: 5 meters Internal dimensions: Length: 6.4 meters Width: 3 meters Height: 4.2 meters Technical data: Year of manufacture: 2013 Heating capacity: 102 kW Flow temperature: 90 degrees Water volume: 6 m³/h Electrical connection load: 4 kW Fans: 3 x 1.1 kW Fodpfx Aaewpfwyo Hsgk Optionally available with wood chip heating

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Fedpjhw Ng Iofx Aa Hogk Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: novo, Leto izdelave: 2022, Shelf Press OMC 3000×1300 105T Oil-Heated Fgedpfjimwp Sjx Aa Hjk Working area: 3000x1300 mm Opening width: 400 mm 6 cylinders with 85 mm diameter Total pressing force: 105T Maximum heating temperature: 85°C Logic control system Machine operation via touchscreen panel Readouts: temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2022 Machine available on order Brand new machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Celaschi squaring machine 4+4 motors Opening width 3000 mm Fedpfx Aaevx Afne Hsgk Option for complete overhaul available

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Fgsdsvu Hghepfx Aa Hjk Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) Fjdpfx Aeqwyclsa Hsgk X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000