Cisterna polpriklopnik

LAG 20 FT ADR Chassis & 35m³ SWAP L4BH / MIETE

Container Chassis 20FT:

Fifth Wheel Height: 1180 mm (unladen, air-suspended tractor unit)

Suitable for transporting containers:
- 1 x 20FT ISO
- 1 x 20FT (7150) swap body
- 1 x 20FT (7450) swap body
- 1 x 20FT (7820) swap body

Three-axle SAF INTRA DISC PLUS SBS2220 axle assembly, with disc brakes (large discs 430 mm).

INTRA air suspension with steel spring brackets.

The axles are air-suspended, with axle 1 as a lift axle, automatically controlled via EBS.

6 aluminium rims U 22.5 x 11.75 - brand TIA - polished finish - ET 120 mm

EBS system WABCO EBS-E, type 2S/2M (ABS on 1 axle), with RSS system (roll stability) and pneumatic parking brake on 2 axles, compliant with regulations.

Tyre pressure monitoring system WABCO OptiTire (TPMS)

JOST MODUL B landing gear, fitted with plates and oscillating feet (S), load capacity 2x12,000 kg, operated mechanically

1 PVC toolbox (1,040x490x480 mm), mounted on the right

Stainless steel drip tray with removable aluminium cover plate.

Next to the drip tray, on both sides, a working platform covered with aluminium safety grating.

Left and right behind the 20FT connection, above the third axle, an aluminium catwalk.

Between the longitudinal beams, 2 pieces PE pipe sleeves, @ 160 mm, length 6,200 mm, with PE end caps at the front.

At the rear, the hose pipes are fitted with separate lockable stainless steel covers (dia 160 mm).

At the rear, 1 foldable ADR sign.

Vehicle designation according to ADR: EX/II + EX/III + FL + AT

Container:

Type: CIMC Longitudinal Swap Body Tank (CLS)

Capacity: 35,000 litres

Tare weight: 4,130 kg

Operating pressure (max.): 3.0 bar

Test pressure: 4.5 bar

Temperature range: −40°C to +130°C

Approvals: IMO Type 4, RID/ADR-L4BH, UIC, TIR, CSC

Shell: 1.4402 (316L), 3.2 mm, 2B finish

Ends: 1.4402 (316L), 4.2 mm, hot-rolled, polished

Baffle plates: 4× vertical, CVC-shaped, corrugated, 70% welded

Internal finish: degreased, pickled, passivated, neutralised

Bjdpfx Ajyqiy Tofnold
Ladder: stainless steel, rear right, theft-proof

Walkway: aluminium, non-slip, 475 mm, with cross steps

Handrail: foldable, telescopic, theft-proof

Stacking: up to triple stacking

Manhole: Ø500 mm, 316 stainless steel, 8-point, EPDM/PTFE

Inspection: 3× Ø300 mm, 316 stainless steel, 4-point

Safety valve: 3", stainless steel, 3.75 bar, without flame arrester, with bursting disc & pressure gauge

Air line: 1.5", with ball, safety & check valves, pressure gauge operable from below

Vacuum valve: 2" BSP, −0.21 bar

Bottom valve: 3", with cable remote closure

Steam heating: 8 longitudinal runs, 1" BSP, 3 bar

Thermometer: analogue, −40°C to +160°C

Insulation:
- 50 mm rock wool (tank & ends)
- PU foam under stainless steel bands

Cladding:
- Shell: 4× 1.8 mm GRP panels

Markings: 3× holders for Edgar Weber folding plates, 1× Kemmler bracket

Subject to prior sale and errors!

Sale exclusively according to our Terms and Conditions.

Important Notice: Despite careful verification of all details in our offer, errors may occur. Some of these may be caused by transmission errors in the systems of various platform providers. We therefore point out that all information is supplied without guarantee and does not constitute a legal claim.

Legal Notice: This sales advertisement does not constitute an offer under §145 BGB. Rather, it is information intended to initiate a contract. The details provided here are non-binding and do not constitute guaranteed characteristics.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.