Široki štiristranski skobeljnik

KUPFERMUHLE 80 na 6 głowic 80cm

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) Nedpfxsvnv Uzj Ab Ijli at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Nledou Uh T Depfx Ab Ioi Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: novo, Working length 3000 mm Working width 360 mm Roller width 360 mm Roller diameter 60 mm Load capacity 900 kg Height adjustment 650 – 1100 mm Machine weight approx. 0.050 t Nsdpefv Attefx Ab Ieli Dimensions (L x W x H): 3.1 x 0.45 x 0.6 m 3 m roller conveyor with manual length stop.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW Nljdpfxovgnb Rs Ab Isi 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine Nedpevwfqqefx Ab Ieli used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, "CELASCHI" Mod. TSA 200 AUTOMATISCHE DOPPELZAPFENMASCHINE Nledpfx Aevi N Rfjb Ioi Mit folgenden Ausstattungsmerkmalen: Nr. 1 + 1 pneumatische Vorritzaggregate 1,5 PS mit Antriebsriemen – 6000 U/min Nr. 1 + 1 Ausräumaggregate 5,5 PS mit Antriebsriemen – 6000 U/min Nr. 1 + 1 Profilieraggregate 5,5/7 PS – 3000/6000 U/min Maximale Arbeitsbreite: 3000 mm Vorschubgeschwindigkeit variabel von 3 bis 18 m/min GEBRAUCHT, IN GUTEM ZUSTAND

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2022, Prodaja se celotna BSH proizvodna linija. Obrat je sestavljen iz komponent podjetja System TM za dovajanje, tehnologije zobate spone NKT, avtomatizacije HIT (regalno skladišče, transport, popravljalna postaja, dovod lamel, lamelarni skobeljni stroj in Kallesoe itd.). Skobeljni stroji podjetja REX — predskobeljni stroj, lamelarni skobeljni stroj in finiš skobeljni stroj. Visokofrekvenčna stiskalnica Kallesoe. 2 silosa. Njdjwgcchepfx Ab Ieli

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Nlodpfx Aevupm Dob Iei Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Planing height: 300 mm Cutterblock: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital readout Feed speed: infinitely variable 5 - 22 m/min Infeed roller: steel Pressure bar: segmented Outfeed roller: rubber, 2x Nledpfx Ajl D Rxfsb Isi Table rollers: no Motor power: 9.2 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Leto izdelave: 2000, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Double-shaft trimming saw, manufacturer Link, type CSMK 285 A1 B1, equipped with spray unit. Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Outfeed device: Av 21 CSMA 540 Outfeed: SE separating conveyor Drive power: 4 x 132 kW Nedpfx Aowww Iysb Ieli Feed rate: up to 150 m/min