Široki štiristranski skobeljnik

KUPFERMUHLE 60 na 6 głowic do mokrego drewna

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Leto izdelave: 1998 Lokacija: Francija, Savoja Nwodpewmm Aljfx Ag Toc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Five-head four-sided planer Steton. Five-head four-sided planer Steton. The machine has been serviced and does not require any additional investment. Technical specifications: - Maximum working width: 23 cm - Maximum working height: 13 cm - Spindle diameter: 40 mm - 1 - Bottom horizontal: 23 cm - 2 - Right vertical: 13 cm - 3 - Left vertical: 13 cm - 4 - Top horizontal: 23 cm Nwedsi Apuhepfx Ag Tec - 5 - Universal soundproof cabin, 360 degrees - Electric thickness adjustment - Two feed speeds

Stanje: rabljeno, Leto izdelave: 2000, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6-36 m/min 1 WEINIG Planing and Moulding Machine Unimat 23 E 6 spindles (2 x right), powerful motors, EM 11 infeed magazine optional Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125 - 180 mm Rabbeting device incl. tool Hardened table insert before 1st bottom spindle 2nd spindle right: 11.0 kW ----- Common motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Common motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe before left spindle, incl. side spring-loaded pressure roller 4th spindle right: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top: 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe prior to top spindle, adjustable to tool diameter and swing-away, spring-loaded. 6th spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool diameter: 112-250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm General spindle information ----- All moulder spindles with high concentricity accuracy. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed steplessly adjustable 6 - 36 m/min Infeed roller before 1st bottom tool, pneumatically controlled (up/down) Durofer pointed tooth rollers (Weinig Patent) with depth limiter, self-cleaning Feed roller adjustment opposite left spindle, axial 35 mm Extension of pendulum axis opposite left spindles to 150 mm Machine electrics ----- Operating voltage: 380-400-415 volts, 50 Hz Machine base, tables and fences Nwodpfx Aowqr Rvjg Tjc ----- Surfacing table 2.5 m long (incl. jointer fence) Aluminum extension 0.5 m for surfacing table, incl. jointer fence extension Manual Waxilit pump for table resin removal One powered rubber roller (spring-loaded in outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatically operated Top pressure rollers can be swung away, opposite right spindles for easy tool change Machine operation ----- Pressure shoe before top spindle with mechanical digital display Outfeed after top spindle with mechanical digital display ATS/E system, automatic 2-axis positioning for spindle no. 3 and 4 Min. working height 12 mm Electric height adjustment of top spindles and feed Central location of lubrication points on machine front Safety and noise...

Stanje: dober (rabljeno), Leto izdelave: 1991, Double-sided, fully automatic, hydraulic crosscutting, milling, and drilling machine PADE NST Double-sided, fully automatic, hydraulic crosscutting, milling, and drilling machine M2fi2 Nsdpodqc T Ejfx Ag Towc For the manufacturing of chairs, tables, frames, and furniture components Maximum working length: 2100 mm Tilt: -10° to +45° Rotation: -10° to +50° 2 saw blades, diameter 400 mm 2 drilling heads, left and right, rotatable 360°, 8 spindles in a cross-grid arrangement 2 additional horizontal drilling heads at the rear, rotatable 360°, 8 spindles in a cross-grid arrangement 2 milling spindles, bore-shaft 30 mm 1 motor for longitudinal adjustment, 1.5 kW 2 saw motors, 2.2 kW 4 drilling motors, 2.2 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Nwedpfxsydmawo Ag Tjc Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: rabljeno, Leto izdelave: 2004, Hitrost 60 m/min 8 delovnih postaj Digitalno pozicioniranje Kromirana miza Potisni ležaji Mazanje Nwedpfsyll D Rex Ag Toc 400V

Stanje: rabljeno, Število vreten: 6 kos Nodjyanu Uopfx Ag Tewc Delovna širina: 230 mm Višina skobljanja: 130 mm Motor za podajanje: 5,5 kW Skobljični in profilirni avtomat Weinig Unimat 23 za štiristransko skobljanje in profiliranje lesa z vgrajenim podajalnikom EM13 in utornim ležiščem. Stroj je opremljen za vzdolžno žaganje na vretenu 4 in za kratke kose. Uporabljen je bil za razrez polizdelkov za metrske letve iz lesa. Vreteno 1: Spodaj / 40 mm Vreteno 2: Desno / 40 mm Vreteno 3: Levo / 40 mm Vreteno 4: Zgoraj / 50 mm / 6.000 obr/min / 18,5 kW Vreteno 5: Zgoraj / 40 mm Vreteno 6: Spodaj / 40 mm Pogonske mizne valjčne naprave: 3

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, BOHNER & KÖHLE (BOKO) MF1 je zanesljiv in natančen univerzalni rezkalni stroj, zasnovan za širok spekter rezkalnih operacij, kot so utori, izvrtine, površine, obrisi in oblikovanje obdelovancev. Zaradi robustne konstrukcije in ergonomskih upravljalnih elementov je primeren za delavnice, servisne delavnice, orodjarne in manjšo do srednje serijsko proizvodnjo. ⚙️ Tehnične specifikacije* Model: BOKO MF1 Dimenzije mize: ca. 1270 × 250 mm Pomiki (X / Y / Z): ca. 850 × 370 × 400 mm Število vrtljajev vretena: 60 – 4200 rpm (brezstopenjsko ali stopenjsko) Največji premer rezkarja: do ~125 mm Stožec vretena: ISO 40 / R8 (odvisno od izvedbe) Moč motorja: ca. 2,2 – 3 kW Napajanje: 400 V, 3-fazno Teža: ca. 3200 kg ✅ Ključne značilnosti Univerzalna zasnova – vsestranska uporaba za različna rezkanja. Velika delovna miza za različne obdelovance. Natančno in stabilno delovanje. Masivna nemška kakovost – znamka BOKO. Primeren za delavniško in industrijsko uporabo. Rabljeno, v dobrem delujočem stanju. 🎯 Področja uporabe Obdelava kovin v delavnicah Nsdpfx Agexdnxgs Tswc Proizvodnja orodij in delov Servisne in vzdrževalne delavnice Izdelava prototipov in maloserijska proizvodnja

Stanje: novo, Leto izdelave: 2024, Machining Centre VMC-1160-D Technical Specifications Type: Belt-driven BT40-8000 rpm Control Unit: FANUC 0i MF(5) Travels: - Max. X-axis travel: 1100 mm - Max. Y-axis travel: 610 mm - Max. Z-axis travel: 610 mm - Spindle nose to table distance: 150–760 mm Spindle: - Drive type: Belt drive - Spindle speed: 40-8000 rpm - Spindle taper: BT40 - Power: 11/18.5 kW - Torque: 52.5/118 Nm Work Table: - Size: 1200×600 mm - T-slots (size x number x pitch): 18x5x100 mm - Max. table load: 1000 kg Accuracy: - Positioning accuracy: 0.008 mm - Repeatability: 0.005 mm Tool Magazine: - Type: Drum-type - Max. tool dimensions (adjacent/adjacent empty/length): Φ78/Φ150/300 mm - Max. tool weight: 8 kg Other: - Air supply requirement: 0.65 Mpa - Power requirement: 25 kVA - Machine weight: 7000 kg - Dimensions (L x W x H): 2900x2800x3200 mm Transport We offer free loading of purchased machines and assistance with transport arrangements. Technical Consultation Our technicians support you in selecting the right machine and suitable accessories, based on technical drawings of the parts to be manufactured. The following services are included in the machine price: A 3-day training and machine installation: - Day 1, up to 8 hours: Installation and control unit training - Day 2, up to 8 hours: Independent operation of the machine under our technician’s supervision – enabling programming of specific details by the customer - Day 3, up to 8 hours: an additional training day to be used within 12 months if any operational questions arise Consultation by our specialists: - By phone: 7:30 am to 9:00 pm (Mon-Sat) – 8-hour package, valid for one year - Online: 7:30 am to 2:30 pm (Mon-Fri) – 8-hour package, to be used within 12 months Access to Otinus Academy courses - LibreCAD – 12 months’ access You also receive: - CAD drawing package Terms of cooperation - 12-month warranty period - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine once it is unloaded and moved on their premises. Njdpfovhck Nox Ag Towc

Stanje: rabljeno, Leto izdelave: 1996, Maximum working width: 230 mm Maximum working height: 130 mm Number of spindles: 5 pcs Nedpfx Agoyhc E Ro Towc 1st spindle: bottom; spindle diameter 40 mm; clamping length 240 mm; speed 6000 rpm; motor power 4.0 kW 2nd spindle: right; spindle diameter 40 mm; clamping length 140 mm; speed 6000 rpm; motor power 7.5 kW (shared motor with left spindle) 3rd spindle: left; spindle diameter 40 mm; clamping length 140 mm; speed 6000 rpm 4th spindle: top; spindle diameter 40 mm; clamping length 240 mm; speed 6000 rpm; motor power 5.5 kW 5th spindle: bottom; spindle diameter 40 mm; clamping length 240 mm; speed 6000 rpm; motor power 4.0 kW Motor brakes: mechanical Height adjustment of top spindle: electric with feed Feed brake system: yes Variable feed speed: 5 - 24 m/min Feed roller pressure: pneumatic Feed power: 2.2 kW Feed drive: cardan Lubrication pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: yes Driven table rollers: 1 pc Control type: push button operation Spindle position display: mechanical digit indicator Infeed rollers before jointer: yes Central lubrication point: yes Description: right spindle pneumatic adjustment from 45 mm; max. saw blade diameter 200 mm; top spindle horizontal, pneumatically indexed forward and back via selector switch; max. saw blade diameter 200 mm; both spindles operated jointly Weight approx.: 3000 kg Storage location: supplier