Široki štiristranski skobeljnik

KUPFERMUHLE 60 na 6 głowic do mokrego drewna

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 240 mm Planing height: 200 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L/W/H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window manufacturing ----- Machine is cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Njdpfx Ajvnv Uzedtedd Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air cushion lubrication in the worktable 2 x milling units with belt drive with quick-change HSK 85 system at positions 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning at positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning at positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) at positions (3 – 4 – 5) Mobile 10 control system PRL equipment for cutting out glazing beads on 2nd upper horizontal spindle Machine is offered without tooling (Technical specifications according to manufacturer – subject to change!)

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Nsdpfxou Uh T Dj Adtodd Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Planer table length: 2720 mm Ndedpfx Asgr Udvedted Adjustment of planer table: Lever Hollow and pointed joint adjustment: No Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 870 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem. Ndodpfx Adovgnb Rjtjd

Stanje: rabljeno, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotation speeds, electric table lifting device Ndsdsrxf Smjpfx Adted

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H4370, Connected load: 380V, 6.8kW, 12A With sliding table, 1100 mm Table size: 1100 x 900 mm Height adjustment via hand crank Integral fence jaws Stops individually adjustable via Siko counter Aigner cutter guard device Extraction connections: 1x120 mm, 1x150 mm Speeds: 2,900 / 4,400 / 6,000 / 8,000 / 10,000 rpm Nsdpfoq Abnkox Adtedd

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Ndsdpowwl Nlsfx Adted Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: zelo dobro (rabljeno), Weinig Hydromat 23C s 6 vreteni. Maksimalna širina: 245 mm Maksimalna debelina: 160 mm Ločena električna omarica. Ločena daljinska upravljalna plošča. Nsdpfx Adern Snmetjdd Avtomatski mazalni sistem za vodilne ploskve. Polna robustna zvočna izolacija. Podajalni motor 15 kW, 100 m/min Vretena: 1. 7,5 kW – spodnje, 6000 obr/min, prilagojeno za ravno čelno rezkanje 2. 11 kW – desno, 6000 obr/min, prilagojeno za ravno in profilno čelno rezkanje 3. 15 kW – levo, 6000 obr/min, prilagojeno za ravno in profilno čelno rezkanje 4. 15 kW – zgornje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje 5. 30 kW – zgornje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje 6. 15 kW – spodnje, 6000 obr/min + zunanji ležaj, prilagojeno za ravno in profilno čelno rezkanje Vretena 50 mm Dvigovalni nosilec 0,55 kW Celotna dokumentacija priložena. Robustna zvočna izolacija. Možnost dobave s hidro orodjem po potrebi. Možnost dobave s popolno mehanizacijo po potrebi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11470, širina obdelovanca (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours and has been professionally dismantled and stored in a heated hall. Njdpfx Aowhpavsdtjdd

Stanje: zelo dobro (rabljeno), Catalogue number 7275 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height: 200 mm From above: - Feed roller, toothed - Anti-kickback fingers - 2 pressure rollers - Feed roller, toothed - Pressure roller - 610 mm planing head, 4-knife, 7.5 kW - Pressure rollers - Feed roller, smooth From below: - Guide bar - Adjustable infeed table with split smooth sliding roller - 610 mm planing head, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure From the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Maximum planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle 160 mm, adjustable up/down + left/right + angle, approx. 4 kW - Possibility to plane with additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers in lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction nozzle diameter: 120 mm - Dimensions (L/W/H): 2550 x 1700 x 1350 mm Nodpfxorq Db Ds Adtodd - Weight: approx. 3000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, flooring, etc. - 2 horizontal planing heads + 2 vertical spindles + 1 horizontal spindle - Cutterheads included - German-made, brand KUPFERMUHLE - Used planer in very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (depending on 4.2 EUR rate) (Prices may vary depending on exchange rate fluctuations)