Široki skobeljnik

Kupfermuehle VUIN 605 constant table

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 0113647, Offer 22109 Technical specifications: - Drilling capacity – in steel: 18 mm - – in aluminium: 20 mm - Drill spindle taper: MT 2 - Drilling depth: 100 mm - Arm length (spindle/column): 215 mm - Spindle speed, stepless: 100 – 1800 rpm - Drive: 400 V / 0.65 / 1.20 kW - Base plate / drill table: 280 x 320 mm - Max. distance spindle / base plate: approx. 520 mm - Space required: approx. W 350 x H 1050 x D 700 mm - Weight: approx. 100 kg Ndsdewmnn Njpfx Af Hed - With keyless drill chuck: 1 – 13 mm

Stanje: novo,

Stanje: skoraj kot novo (rabljeno), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL SPECIFICATIONS: cutting width: 350 mm Ndodjqy E Rlopfx Af Hed cutting height: 160 mm main motors: 37 and 45 kW feed motor: 3 kW adjustable lower shaft width max. blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm feed chain width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min centralized lubrication minimum workpiece length: 600 mm electric height adjustment electrical shaft height adjustment six upper pressure rollers mechanical roller hold-downs four anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Stanje: rabljeno, ATLAS AB 1302 mobilni bager, rabljeno stanje, lastna masa: 11,8 t Njdpew S Ix Rofx Af Hjdd

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Ndodou Uh T Depfx Af Hod Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: rabljeno, Leto izdelave: 2006, Proizvajalec: Weinig Model: Unimat Super 4 Leto izdelave: 2006 Štiristranski skobeljni stroj Proizvajalec: WEINIG obnovljen Model: UNIMAT SUPER 4 z avtomatsko mehanizacijo kratkih obdelovancev EM15 - Leto izdelave: 2006 Tehnične specifikacije - Delovna širina: največ 150 mm - Delovna širina: najmanj 25 mm - Delovna višina: največ 50 mm - Delovna višina: najmanj 15 mm - Število vreten: 3 - Moč zgornjega vretena: 22 kW - Moč spodnjega vretena: 11 kW - Hitrost vrtenja vretena: največ 7.000 min⁻¹ Ndjdjqprk Tjpfx Af Hjd - Premer vretena: 40 mm - Dolžina mize: 2.000 mm - Največja hitrost podajanja: 24 m/min - Neprestano nastavljivo podajanje - Poseben motor za vsako vreteno - Kardansko gnano podajanje valjev - Podajanje iz zalogovnika - Motorni pomik višine skobljanja - Avtomatska mazalna črpalka - WEINIG čelni rezkar - WEINIG EM 15 - Skupna priključna moč: 45 kW

Stanje: novo, Tip 1000-2S Delovna širina: 1000 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Hitrost brusilnega valja: frekvenčno regulirana Ndsdjm Dr Rnopfx Af Hod Hitrost podajanja: 5–20 m/min Skupna moč motorja: 4,12 kW Transportne dimenzije: 1700 x 1600 x 1400 mm Teža: 800 kg Cena: 4.130 EUR (EXW Jonava, Litva)

Stanje: rabljeno, Leto izdelave: 2000, Debarking plant type VK 32 Ndodpfx Aswwladef Hsd !! Sale on behalf of customer !!

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Nodsu Atmuopfx Af Hodd Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: dober (rabljeno), Multiblade Saw Gabbiani SA 300 – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8-56 m/min disc diameter: 300 mm spindle diameter: 50 mm sleeve diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of kickback pawls height from base: 740 mm Nodpfx Aehcwrksf Hedd extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm