Oprema za označevanje

Krones mit Bügel Universella

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, For sale: (For further extensive technical data, see PDF) Technical Details of the Machine: - Long-tube filling system with 40 filling valves and 8 counterpressure pistons Lodpowqz Nnsfx Al Nohf - Pre-evacuation system to reduce oxygen intake - Hygienic bottle table and stainless steel components for durability - Mechanical adjustment range: 3,000 to 15,000 bottles/hour - Capacity range: 0.33l LN 3,000–13,500 bottles/hr, 0.5l NRW 3,000–12,000 bottles/hr - Low oxygen pickup: max. 0.02 mg O2/l - Conversion parts included for various bottle types (0.33l longneck, 0.33l Steinie, 0.5l NRW) Advantages of the Machine: This machine offers numerous benefits that enhance the quality of the filling process. - Smooth, product-friendly filling under CO2 atmosphere - 50–60% lower CO2 consumption compared to short-tube fillers - High durability due to reinforced drive elements - Hygienic design makes cleaning easier - Short changeover times - Convertible to cans according to the manufacturer (conversion kit not included) Low operating hours: 3 days/week at 7 hours each; rarely used for 4 days/week Annual maintenance by the manufacturer The machine is immediately available and was only decommissioned about 5 months ago. Original purchase price was approx. €330,000

Stanje: rabljeno, Glass bottle filling line for hot filling of smoothies. Consisting of the following components: - Unpacking table - Bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type "VW 24/1") - Flash pasteurizer Ledpfx Aewgc R Eol Nohf - Pressure tank - Capper (Marchesini, type "ML667") - Cap sorter - Tunnel cooler - Blower - Cap inspection (BBull CIS) - Labeller (Anker, 1999, type "Roland 10/4") - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler Machine (additional): Hot filling, with pasteurization Capacity: 5,000 bottles/h Formats: 0.25-litre bottles, twist-off caps Equipment: Unpacking table, rinser, vacuum filler, flash pasteurizer, pressure tank, capper, cap sorter, tunnel cooler, cap blower, cap inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler.

Stanje: rabljeno, Leto izdelave: 2003, Labelling machine, manufacturer: Krones, type: Universella 10-4-4, Capacity: 10,000 - 14,000 bottles/h, parallel machine, with 10 bottle plates and 4 glue pallets, Lhodpfxounh T Ej Al Nof equipped with 3 set-up kits, with 2 stations for body, neck, and back labels, with 2 heated glue pumps

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), An incomplete returnable glass bottling and packaging line is being offered, consisting of the following machines and units: Unloader: Kettner; Crate washer: Bohrer, plug-in sieves, 1x zone, 2 inverters; Unpacker: Kettner Blitzpac A35 T1 year 2002; Cap remover: Adelski; Cleaning machine: Krones Einend KESK, year 1994, approx. 19,303 operating hours; EBI inspection machine: Heuft Spectrum Inline IR, year approx. 2015; Filler: Cobert, 60 filling valves, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-station, 2 pcs. KK 10-station; Twist-off capper: SWC year 2008; Recooler: NIKO year 2015, temperature range: approx. 85°C–30°C; Labeller: Krones Prontomatic K090-A43, body, neck and back label application; Date coding: Markem Image; Loader: Kettner Bojok, Born Binder. Processable containers/formats: Bottles 0.2l/30-bottle crate, 0.25l (RW), 0.5l/24-bottle crate, 0.7l juice bottle, 0.75l (single-use), 1.0l VdF/6-bottle/12-bottle crate; Crate/formats: 1.0l VdF/12-bottle/6-bottle plastic crate, 0.75l VdF/12-bottle plastic crate, 0.2l/30-bottle plastic crate, 1.0l/12-bottle carton. Lhedpfx Alex Aupve Njf Inspection by appointment possible.

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 500 h, številka stroja/vozila: LC392, Used Complete Water Bottling Line (Non-Carbonated Drinks) 300 BPH 18.9 L CapSnap The CapSnap Adapta Series is a modular, integrated system for bottle washing, filling, and capping. It is the perfect solution for medium-sized HOD (Home & Office Delivery) water bottling operations. Designed for versatility, these machines can be configured for 3-gallon and 5-gallon bottles. This complete system efficiently handles 300 – 600 BPH (bottles per hour). Manufacturer: CAP SNAP – Portola – USA Year of manufacture: 1999 (completely overhauled in 2015 and has only been in operation for 500 hours since) Ljdpsvgud Sjfx Al Nohf Capacity: 300 BPH (bottles per hour) Required utilities: Compressed air 6 bar, electrical power 40 kW, rinse water supply 2 bar, and fill water supply Line configuration: - Semi-automatic cap removal unit: Used for removing caps from bottles. - Infeed conveyor: Bottles are placed manually onto this conveyor. - Pre-rinse with cold water via nozzles: The first washing stage using cold water. - Wash with warm water and detergent via nozzles: The second washing stage, using 50 °C warm water with detergent. - Rinse with cold water and disinfectant via nozzles: The final washing stage, using cold water and disinfectant. - Filler outfeed conveyor: Here, bottles are filled, two at a time. - UV filter: Water passes through a UV filter integrated into the bottle water inlet. - Conveying filled bottles to the capper: The bottles are transferred from the filler to the capping unit. - Disinfecting caps by applying disinfectant to bottle necks: Caps are disinfected and prepared for capping. - Capping cylinder: Caps are applied onto the bottles here. - Outfeed conveyor: Bottles are manually loaded onto pallets from here. Each component of this system plays a specific role in the bottle-filling process and together they form a fully functional, used complete water bottling line.

Stanje: rabljeno, Leto izdelave: 2004, Rabljeni monoblok za polnjenje FIMER za pivo, kapaciteta 4000 steklenic/uro Rabljeni monoblok za polnjenje FIMER za pivo, kapacitete 4000 bph, predstavlja celovito tehnično rešitev za pivovarne, ki potrebujejo zanesljiv sistem za izpiranje, izobarično polnjenje in zapiranje steklenic. FIMER je to enoto izdelal leta 2004, model SRTT1-20-20-3-3 CPK. Odlikujeta jo kompakten dizajn in dolgoročna stabilnost delovanja. Zato je ta oprema primerna tako za obrtne kot tudi polindustrijske pivovarne. Konfiguracija monobloka: izpiranje, polnjenje in zapiranje Stroj združuje tri usklajene operativne module: izpiranje, izobarično polnjenje in zapiranje. Oddelek za izpiranje uporablja 20 prijemal za varno in učinkovito rokovanje s steklenicami, medtem ko polnilni sistem vsebuje 20 izobaričnih ventilov, ki zagotavljajo ravnotežje tlaka skozi celoten proces – bistvenega pomena za gazirane pijače, kot je pivo. Modul za zapiranje vključuje 3 glave, primerne za pokrovčke s premerom 26 mm in 29 mm. Sistem tako omogoča uporabo različnih vrst zapiral ter zagotavlja natančnost in konstantnost. Tehnologija zapiral izvira od podjetja AROL, priznanega proizvajalca visoko zmogljivih zapiralnih sistemov. Posledično monoblok jamči za kakovostno in tesno zapiranje. Formati steklenic in združljivost vratov Lhjdpfx Alswcf Acj Njf Rabljeni monoblok za polnjenje FIMER za pivo 4000 bph obvladuje različne tipe vratov, vključno z Long Neck, APO in Champenoise. Podpira steklenice volumna 33 cl in 75 cl ter dosega proizvodne hitrosti 4000 steklenic/uro za 33 cl in 2000 steklenic/uro za 75 cl. S tem lahko pivovarne upravljajo različne linije izdelkov znotraj enotnega proizvodnega toka. Stroj obenem omogoča fleksibilno prilagajanje formatov brez daljših priprav, kar povečuje učinkovitost proizvodnje in zmanjšuje ozka grla. Ta vsestranskost je posebej koristna za pivovarne z več SKU-ji v različnih embalažnih standardih. Tehnične specifikacije in vzdrževanje Monoblok deluje z močjo 10,5 kW, kar odraža energetsko učinkovito zasnovo. Vsebuje vse ključne varnostne elemente skladno z industrijskimi predpisi. Osnovni okvir je izdelal CIMEC, mehanske in krmilne komponente pa FIMER in AROL. Skupaj zagotavljajo stroj, za katerega so značilni robustnost, natančnost in enostavno vzdrževanje. Nazadnje so certificirani tehniki aprila 2020 izvedli vzdrževalna dela: zamenjali so 20 batov, 20 ventilov in 20 ključev za odpiranje ventilov ter popolnoma namazali glavni steber. Enota je tako v odličnem mehanskem in higienskem stanju. Zabeležena vzdrževalna zgodovina pomembno prispeva k zagotavljanju stalne operativne pripravljenosti monobloka. Trenutno stanje in razpoložljivost Rabljeni monoblok za polnjenje FIMER za pivo 4000 bph je trenutno v skladišču ter na voljo za ogled in premestitev.

Stanje: rabljeno, Leto izdelave: 2011, Overview This counter-pressure filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The model multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 is a high-precision filling system equipped with 24 electro-pneumatic filling valves with double pre-evacuation, ensuring low oxygen uptake and optimal filling performance for beer and other carbonated beverages. The monoblock system includes both a 6-head crown corker and a 6-head screw capper, providing flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum output of 6,000 bottles per hour. Technical Data Application: Beer and other carbonated beverages Capacity: 6,000 bottles per hour Filling valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Ring bowl diameter: 960 mm Lsdpfx Aloyb Silj Nehf Capping heads: 6 × crown cork (KK) + 6 × screw cap (SV) Pitch: 125 mm Operating hours: 7,200 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Kriogenični rezervoar za plin, primeren za kisik, dušik, argon in ogljikov dioksid (CO₂). Proizvajalec: Harsco (Nemčija) Leto izdelave: 1991 Vakuumska izolacija: s certifikatom. Na voljo imamo tudi širok izbor drugih rezervoarjev za različne tehnične pline. Prosimo, sporočite nam vaše specifične zahteve – z veseljem vam svetujemo. Lhodpsyuu Scofx Al Njf

Stanje: rabljeno, Leto izdelave: 2007, Polnilna linija, 6.000 flaš/h, za 0,5 l steklenice, še vedno nameščena, prosta, vključuje naslednje stroje: - Razpakiralec steklenic, proizvajalec Matec, tip: Varipack 400, leto 2007 - Stroj za čiščenje steklenic, proizvajalec GM Gera, tip: Arcade GEK2.1 RV1-164/85-15, leto 2007 - Polnilni in zapiralni stroj za steklenice, tip: Varifill 24/KK8, leto 2007 - Dovod za kronske zamaške letnik 2007 - Kontrola višine polnjenja in etiket, tip: basic 2, leto 2007 - Pakirni stroj za steklenice, tip: Varipack 400, leto 2007 - Pralec zabojev, proizvajalec GM Gera, tip: KWM S111 1500/508, leto 2007 Lsdpfx Aloyrpxrj Nehf - Transporter za steklenice in zaboje, leto 2007 - Sedimentacijski rezervoar za lug, leto 2007 - Inšpektor za steklenice, proizvajalec Nate, tip: Exan 08, leto 2012 - Etiketirka KUBE K30, leto 2016 Za več informacij nas kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Stroj, ki omogoča hlajenje katerega koli formata. Hladilnik je razdeljen na naslednje skupine: 1- Vstop pločevink. 2- Hladilni hodnik - CONA 1 - CONA 2 - CONA 3 3- Izhod kozarcev. 4- Sušenje. Vključuje: Ljdpox S Iu Tefx Al Njhf - Vhodni in izhodni trak s frekvenčno reguliranim motorjem. - 3 centrifugalne črpalke - Črpalke za doziranje kemikalij. Zmogljivost je odvisna od formata.