Rezkalni stroj

KOVOSVIT MAS A.S. Model MCV 1000

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, spindle speed: 60-6000 rpm, Number of tool stations: 60, tool magazine: BT 50, drive power: 22/26 kW, Grid size: 250 mm, control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, width: 3300 mm, height: 3800 mm, weight: 25 t, equipped with High Precision Contour Control, Lrsdpforw Dknox Abbjg Central lubrication system upgraded (2005), axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion 128 Kbyte, tool correction memory (200 pcs.), High Speed Remote Buffer, Extraction via HEPA filter system, upgraded to high-pressure internal coolant supply 20 bar and zero-point clamping system with 16 chucks each.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, MCS Jigger High Temperature 143ºC. Type: COMBY-JIGGER JP70. Year of manufacture: 1982. Completely overhauled in 2002. Ljdpfx Aefqmx Tebberg Pressure: 3 kg/cm² Capacity: 9,170 l Roll width: 2,000 mm Fabric diameter: 1,100 mm Roll diameter: 324 mm Additives tank.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm Lrodeu Dm E Hjpfx Abbjg • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Lrjdpfeh Tk Rvsx Abbeg Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Lredjw Awmtspfx Abbjg Delovne ure vretena:

Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm–0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. An on-site inspection is possible. Lredpfx Ajuqackebbjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control Lodpfjxgnz Tox Abbjrg - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: rabljeno, Leto izdelave: 2012, x-hod: 1.035 mm y-hod: 560 mm z-hod: 510 mm CNC upravljalnik: HEIDENHAIN TNC620 Dimenzije mize: 1200 x 560 mm Največja obremenitev mize: 1000 kg Vreteno: SK 40 Število vrtljajev vretena: 10.000 U/min Pogonska moč vretena: 13 kW Neskončno nastavljiv pomik: 20.000 mm/min Hitri pomik: 25 m/min Orodniška izmenjevalna naprava: 20 pozicij Naprav za notranje hlajenje (IKZ): 20 bar Obratovalna napetost: 400 V Skupna priključna moč: 17 kVA Ledpfxow A Spvo Abbsrg Teža stroja: cca 4,1 t Potrebni prostor: cca 2,55 x 2,30 x 2,25 m Transportni trak za odrezke: 3,90 x 0,95 x 1,60 m - Tovarniška št.: 1539000377A - Delovni čas stroja: 21.689 h - Delovni čas vretena: 9.021 h - Krmiljenje: Heidenhain TNC 620 - elektronsko ročno kolo - Transportni trak za odrezke - IKZ 20 bar

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Ledpfjvr Eh Eox Abbjrg Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of magazine tools: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg Lredjup Hwxopfx Abbjg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 50223 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extraction: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM