CNC stroj za vrtanje in vstavljanje moznikov

KOCH WINDOOR

Leto izdelave: 1997, stanje: dober (rabljeno), I am selling a dowel boring machine with dowel inserter KOCH WinDoor Ledpfefyn Tyox Ahuohh Year of manufacture: 1997 Number of dowel spindles: 1 (suitable for dowels 8x60mm) Number of insertion heads: 1 Motorized adjustable axes. Workpiece length: 200-3500mm Workpiece width: 20-200mm Workpiece height: 30-100mm Available for immediate sale.

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Lodpsdh Tfgsfx Ahujhh Free space

Stanje: dober (rabljeno), Predelki so nagnjeni v desno. Širina nosilca: 65 mm. Za višino stekla: 2030 mm. Višina: pribl. 2400 mm. Globina: pribl. 3750 mm. Širina: pribl. 2400 mm. Ljdpfx Aoxq Rklehuohh Teža: pribl. 1900 kg. Na voljo 2 kosa. Stanje: dobro, rabljeno.

Stanje: rabljeno, Leto izdelave: 2018, 1 piece CNC-CONTROLLED BORING, GLUING, AND DOWEL INSERTION MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3Ph, 50Hz, complete in standard configuration with: - Carriage with linear guide, consisting of: - 1 pc. single-spindle horizontal boring unit, motor 1.1 kW, selectable spindle speed via operator software (3000/5000/8000 rpm) - 1 pc. exhaust, gluing, and dowel insertion station in reinforced design for dowels Ø 8 mm, dowel length 30 mm - Fully automatic, electronically controlled central lubrication system - X-axis NC controlled, with working length of 1300 mm, maximum traverse speed 78 m/min - Z-axis, position via table support programmable from 5–40 mm, option for NC-controlled Z-axis - Programmable dowel projection depth from 7–20 mm, option for NC-controlled Y-axis - Drilling depth from 0–35 mm (with drill bit length 70 mm) is set automatically with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, suitable for adhesives with viscosity of 150 to 350 mPas - Infinitely variable glue quantity control via operator software - Selector switch GLUE/WATER for flushing the glue system; each with 1 stainless steel tank for 5 kg glue and 5 l water - Indicator light for glue residual level in glue container - 1 pc. left, 1 pc. right, and 1 pc. central side stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control with: - Integrated industrial PC, inkl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industry display 15" resistive touch, 1024 x 768 resolution, CPU 2 GHz, 256 MB RAM, 2x network adapters, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas assignable with different programs, graphical workpiece representation, parametric programming, zero-point shift, programmable work lists, error diagnosis in plain text OPTIONS: Lhjdpfexwaz Hex Ahuoh - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle - 4 additional vertical angled clamping cylinders 10° with holders (total 8 clamping cylinders) - Surcharge for machine bed length 1800 mm with working length 1800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm (standard working length not reduced) - 1 NC-controlled Y-axis, with ball screw and dynamic traverse speed 300 mm/sec. Programmable via software: dowel projection 7–30 mm and drilling depth 0–42 mm (with drill bit length 77 mm) for vertical drilling unit from ABOVE; Y-axis position 5–42 mm - Surcharge for NC-controlled Y-axis, position 5–62 mm instead of 5–42 mm - Surcharge for: 1 vertical drilling unit from ABOVE, 1.5 kW motor, with multi-spindle boring head with 3 individually selectable drilling spindles, 32 mm pitch along X-axis, spindle speed 3000 rpm, Y-axis position 5–42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K...

Stanje: dober (rabljeno), Koda: 0228 Lhjdpfx Aexnxumjhuoh Znamka: OMS SALVARANI Model: 300 INVINCIBILE Pnevmatski dvoglavi prečni rezalni stroj za rezanje lesa, okvirov, stavbnega pohištva, pohištva in različnih drugih materialov Tehnični podatki: Delovna dolžina: 3000 mm Premer rezila: 300 mm Moč motorja: 2,5 KM - 3000 o/min Ročno pomikanje obeh glav Rezanje od 0 do 45° desno in levo Pnevmatska stopalka za spuščanje glav 2 pnevmatski vpenjali za pritrditev obdelovancev 2 odsavna nastavka Ø 50 mm Stisnjen zrak: 6 bar Skupne dimenzije: 4000 x 700 x 1250 mm (višina) Teža: 520 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4C0524, Lector Vectra 500 Year: 2004 No.: 4C0524 Reliable, excellent machine! Width: 180 cm Lhodpsw Am S Sjfx Ahueh Length: 210 cm CNC panel saw

Stanje: novo, Bore diameter variable, mm Number of horizontal boring heads: 1 pc. Number of vertical boring heads: 0 pcs. 1 Götzinger Dowel Gluing and Insertion Machine BLE The BLE is used to apply glue and insert dowels into the end faces of workpieces. Optionally, the BLE can be upgraded with a drilling unit, counter milling unit, and longitudinal stop. A 10" touch panel enables easy operation in manual or online mode. Basic Frame: compact design, covered with sheet metal Table size approx. 800 x 200 mm Pos. 1 ----- 1 Glue station Full-jet valve Precisely adjustable glue quantity Glue gun for opposing hole application Pos. 2 ----- 1 Stainless steel glue pump, high-pressure pump and glue hose Pos. 3 ----- 1 Insertion station with dowel singling device and insertion cylinder Pos. 4 ----- 1 Vibratory feeder for dowels d 8 x 50 mm with feed hose to the insertion unit Pos. 5 ----- 1 Processing unit with cross table, linear guide, and 3 NC-axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm insertion depth Pos. 6 ----- 1 Positioning control 10" color touch panel Up to 500 drilling patterns can be created and stored, which can be easily recalled as needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connectivity For online control, the data must be prepared in the appropriate software format for the controller – our machine can receive and process these data. ----- Total price for version with Pos. 1 to Pos. 6: on request! Optional equipment and surcharges: ----- Pos. 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Lhodpfsu Uu Uzox Ahuoh Speed 4,000 – 8,000 rpm, collet chuck mounting Drill feed: pneumatic Surcharge: EUR 4,305.00 Additional accessories such as larger touch screen, additional dowel station for different dowel sizes, scanner for program selection, or top rail gluing, available on request! Prices are net plus statutory VAT, excluding packaging/shipping and commissioning. (Technical data according to manufacturer – subject to change and without guarantee!)

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050 Lhsdsqy Em Nspfx Ahueh

Stanje: rabljeno, Leto izdelave: 2014, Used machine Year of manufacture: 2014 Features and technical data: Lhedpfx Aoy Ih Skshujh Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-off, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis CNC controlled, with working length 1300 mm, max. traverse speed 105 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5-40 mm - Dowel insertion projection adjustable from 7-20 mm via mechanical digital counter; drilling depth from 0-35 mm (with drill bit length GL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in the glue container - 1 pc. left side stop, 1 pc. right side stop, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic inclined clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm 1 pc. TCT control unit with: Integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensions, automatic workpiece mirroring and process optimization, 4 work fields assignable with different programs, graphic workpiece display, parametric programming, zero-point shifting, programmable job lists, error diagnosis in plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with CNC-controlled, dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Traverse speed max. 30 mm/sec. 1 single-spindle vertical drilling unit from above, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, max. drilling depth (Z) 30 mm (with drill bit length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical inclined clamping cylinders 10° with mount, additionally 1 keyboard with mount Availability: by arrangement; currently being overhauled at the Ganner factory Location: Austria

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 712537, LECTRA VT-FA-FX -72 CNC textile cutting machine Lhjdpfxjwzxx Us Ahueh Year of manufacture: 2007 Cutting height: 2.5 cm Working width: 170 cm Table length: 185 cm Continuous feed system. CNC-controlled. In well-maintained condition. Video available on request. Equipped with post-print printhead.