Ekscentrični tisk

Knuth KEX 10

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Single stroke: 100/min, continuous stroke: 200/min, ram-to-table distance: 180 mm, working depth: 150 mm, table dimensions X/Y: 370 mm/270 mm, stroke: 10 mm/40 mm, hole diameter: 25 mm, weight: approx. 530 kg. An on-site inspection is possible. Kdodpfx Aowzx S Ijf Tsg

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Kdjdsu R S Hpepfx Af Teg Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) Kdedpjfqpxiefx Af Tsg - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: Kdedpfxjtt Nd Rj Af Tsg 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill Kdjdpfx Aonzpx Rsf Teg -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Kedpewk D Efjfx Af Tjdg Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Kdodju Ixznspfx Af Teg Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Ksdpfx Afjt Iklkj Tjdg Weight: approx. 3,000 kg

Stanje: novo, GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid materials, profiles of all kinds. Materials: Hard or soft steel, non-ferrous metals, plastics. Working process: Once the workpiece support and side stops are set, the burr-laden workpiece is lightly pressed against the brush, which rotates on its own axis. The workpiece itself does not need to be rotated, as this motion is performed by the brush. The type of workpiece material, burr thickness, as well as the desired edge rounding determine the contact pressure and duration, typically around 1–5 seconds. Technical Data: Material: Steel, stainless steel and non-ferrous metals (motor speeds 700–1,900 rpm, stepless) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Brush dimensions: 2 pieces Ø300 (250) x 50 or 3 pieces Ø 300 (250) x 35 Drive power: 3.0 kW Connected load: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Kdodpsd Hmnfsfx Af Tjg Rated current: 8A Pre-fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + handwheel 74 mm, + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max. speed 82 dB(A) Scope of delivery: GRATMAXX rotary head deburring brush machine with power socket, without cable Workpiece support table with adjustable angle stop and workpiece stops Tool for brush replacement Brushes not included in delivery! Accessories: F50201 Circular brush braided wire 0.38 mm F50202 Circular brush steel wire 0.2 mm F50203 Circular brush steel wire 0.38 mm F50204 Circular brush stainless braided wire 0.38 mm F50205 Circular brush abrasive nylon U180 F50206 Circular brush abrasive nylon U120 F50207 Circular brush stainless steel wire 0.20 mm Further technical details can be found in the attached PDF document.

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Kdedpewki Apsfx Af Tsg Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg