Sistemi varilnih miz 3 D z nastavitvijo višine

KK Kletzer Schweißtisch SWT 65-105/16S Ø16 Flex 1450x950

Stanje: novo, Table height: 650 – 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 425 kg Fpodpfxofk Aixj Afljb This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Standard height adjustment is performed manually via a hydraulic system within the 650 – 1050 mm range (other heights available upon request). The worktop also features a Ø 28 mm hole grid with a 100 x 100 mm spacing, just like the SST fix series. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the machine. The table systems can be easily relocated on site with a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools due to their various mounting and securing options. After removal from the machine, tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of future wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Fpedsgvkk Nopfx Afljb Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Fpodpfx Afexddamsleb Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version Fpedpehq T N Djfx Aflsb - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: novo, Table diameter: 330 mm Table load capacity: 220 kg Swivel range: 135 degrees Tilting adjustment: manual/motorized manual Fodpoh D Svcjfx Afljpb Maximum rotation speed: 5 rpm, stepless Table load capacity (vertical): 100 kg Total power requirement: 0.125 kW Machine weight: approx. 48 kg Space requirements: approx. 640 x 440 x 630 mm Welding positioner with: - Foot pedal - Hand-operated tilting/swiveling - Stepless speed adjustment - 250 ampere welding current transmission - Bore in faceplate: 30 mm diameter, 20 mm deep.

Stanje: novo, Table diameter: 560 mm Table load capacity: 0.3 t Swivel range: 0-90 degrees Table rotation speed: 0.25 - 4 rpm Max. torque: 360 Nm Max. center of gravity distance: 150 mm Total power requirement: 0.4 kW The D-HB series rotary tilt tables are extremely stable due to their heavy-duty construction, making them particularly suitable for heavy and precise positioning tasks and circular welding operations. Features: - Easy installation - Increased productivity enabled - Improved weld quality thanks to optimal positioning and speed control - Reduced crane hours and handling time, while improving workplace safety - Self-locking gearbox, no overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled rotation speed - High stability due to rugged design - CE certification - The D-HB series includes a remote control with foot pedal for left/right rotation and start/stop functions. Fpedpfx Afegvkgteleb

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Fpedpfx Afsfk Aivsleb Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Fpodpfsfk E Dzjx Aflob Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 375 kg Fpedpfx Ajfk Ai Esfleb Special workbench systems of the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g., fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium batches. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop featuring a Ø28 mm hole grid. Additionally, the tabletop comes with a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows for the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be supplied, deviating from the standard, in stainless steel 1.4301, aluminum, plastic, or even in high-strength ST70 materials. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively when worn, ensuring the table system remains especially sustainable in use. Price must still be requested from the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Fpodpfx Afogrvv Toleb Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 308 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!