Odvod varilnega dima

KEMPER ProfiMaster 60650

Stanje: novo, Leto izdelave: 2024, skupna višina: 860 mm, skupna dolžina: 2.400 mm, skupna širina: 1.200 mm, skupna masa: 920 kg, vrsta nastavitve višine: mehanski, Manufacturer: GERD WOLFF Technical Details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scaling • Reinforcement by weld seams and ribs on the underside Dcjdpfxovbbqnj Afqer • Optimal working height: 820–865 mm • 6x height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are gas nitrided as a complete unit following mechanical processing. Additionally, they feature precise fine scaling engraved using laser technology. To ensure adequate stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). Furthermore, each table undergoes a 3-day gas nitriding process, which considerably enhances corrosion resistance as well as the tables’ fatigue and vibration strength. All of our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a variable working height from 820 mm to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images do not depict the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding tables

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 3253-80, Offer 22045 Technical Specifications (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm Dcjdpfxjktg Dhe Afqsr - Table height adjustment: 160 mm - Through-hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram area: 240 x 150 mm - Ram bore diameter: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Stroke rate: 130 strokes/min - Hydraulically operated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Space requirement approx.: W 1000 x H 1800 x D 1100 mm - Weight approx.: 1300 kg

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (flat): 150 x 110 mm Cutting capacity at 45° (round): Ø 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 & 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Dsdpfxst A Ar So Afqjcr Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment/features: - Semi-automatic vertical cold circular saw - Pneumatic quick-acting material clamping device - Infinitely variable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a highly stable rectangular guide - User-friendly and stepless lifting adjustment of the sawing unit via clamping lever - Generously dimensioned gearbox - Equipped with Eisele rotation compensation for extended saw blade lifetime - Easy saw blade changeover - High productivity while requiring minimal floor space (less than 1 m²) - Coolant system integrated in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be tested/inspected under power on site by arrangement. All specifications are subject to change. Prior sale reserved. The item is sold under exclusion of any warranty. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, body, or health.

Stanje: novo, Leto izdelave: 2024, The welding fume extractor OS 3008 is ideal for extracting fumes and vapors generated during welding, polishing, cutting, or grinding of rare precious metals. It can clean large quantities of airborne metal particles that are harmful to health. This unit is characterized by high filtration efficiency, low noise emissions, and a relatively compact footprint. It is suitable for extraction during arc welding, CO₂ welding, MIG/MAG processes, slit arc welding, and welding in a gas-shielded environment. Extraction capacity: 3,000 m³/h These extractors are equipped with high-efficiency filter cartridges that differ from conventional filters by featuring a PTFE membrane layer (polytetrafluoroethylene). In conventional filters, the fiber length of filter materials such as cotton, satin, paper, and other cellulose fibers ranges from 5 to 60 µm. Soot particles contained in the extracted fumes can remain in the filter and clog the filter element. If clogging becomes excessive, ash can no longer be effectively removed, airflow resistance increases, and the gas flow decreases. As filter contamination increases, filter efficiency drops significantly. Our filter incorporates a PTFE membrane layer with a fine structure that blocks microscopically small dust particles. These particles form a dust cake on the surface of the filter material. Most dust particles adhere to the outer surface and do not penetrate into the filter. Over time, particles can be removed from the filter by pulses of cleaned compressed air. Air volume (m³/h): 3,000 Pressure (Pa): 2,000 Filter efficiency (%): 99.9 Power (kW): 3 Filter area (m²): 30 Filter dimensions (mm): 700 x 750 x 1,700 Voltage (V): 380 Weight (kg): 90 Dedpotu H N Hsfx Afqjcr Additional filter costs €140 (net, excl. VAT).

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Dcjdpfx Aow Dvivjfqjr Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 60 t Reach: 280 mm Stroke: 10 - 90 mm Ram Adjustment: 60 mm Strokes per Minute: 110 spm Table Area: 740 x 550 mm Clamping Plate: 740 x 555 mm Ram Surface: 380 x 200 mm Installation Height with Max. Stroke Up and Ram Adj. Up: 360 mm Total Power Requirement: 4 kW Machine Weight: approx. 3.85 t Dedpfx Afev Az T Sjqecr Space Requirement (W x D x H): approx. 1.1 x 1.6 x 2.3 m - Fixed table - Clamping plate - Ortlinghaus hydraulic clutch with additional brake - Manual central lubrication The machine will be partially overhauled in our facility as follows: - Disassembled, cleaned, and fully technically inspected - Shaft removed, crack tested, new seals installed - New paint finish - New control cabinet with touchscreen - New rupture plate and cutting ring - Current press inspection

Stanje: rabljeno, Pressing force: 45 t Outreach: 230 mm Stroke: 8–96 mm Total power requirement: 4 hp Dsdpfx Afowgi Rxjqocr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1502000011, skupna masa: 95 kg, volumenski pretok: 1.100 m³/h, moč: 1,1 kW (1,50 KM), Bila je zelo malo uporabljena. ŠxGxV: 760x760x970 + dolžina izpušne roke. Dcodpfxeww Ugte Afqsr

Stanje: novo, Leto izdelave: 1984, Pressure: 80 t Throat depth: 280 mm Stroke: 10–100 mm Strokes per minute: 52/80 spm Ram adjustment: 60 mm Table size: 850 x 550 mm Ram surface: 420 x 220 mm Dcodpfx Aswa Umlefqor Through-hole in table: 300 x 200 mm Table height: 780 mm Ram bore diameter: Ø 45 mm Machine weight: approx. 4.5 t Space requirement: approx. 2000 x 2000 x 2700 mm Hydraulic clutch-brake combination Manual centralized grease lubrication Mechanical overload protection in the ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation

Stanje: rabljeno, Leto izdelave: 1981, Speed 40/80 rpm Machine No.: 0025 Voltage 380 V Clamping: yes kW Djdpfxsvu Hlke Afqscr Mitre: yes Weight: 700 kg