Tračna žaga

KASTO SBA 260/400G

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Nedpfx Ahjfg E H Ts Dedd Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis Nodpfx Ajt I Di Aoh Djdd • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,39 kW (25,00 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rdeča, lastna masa: 2.150 kg, dvižna moč: 980 kg/m, dvižna višina: 2.500 mm, velikost pnevmatike: 31X15,5-15, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, konfiguracija osi: 2 osi, število sedežev: 1, emisijski razred: Euro 5, širina izkopne žlice: 1.500 mm, Leto izdelave: 2025, gorivo: dizel, nosilnost: 980 kg, Oprema: dodatne luči, hidravlika, kabina, pogon na vsa štiri kolesa, spojka prikolice, standardna žlica, vilice za palete, zapora diferenciala, The H&R Wheel Loader 2210-B35 (Wide Track) – a compact loader with a wide track for increased stability. The new 3-cylinder Perkins turbo engine with 18.5 kW (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the compact loader 2210 B35 reaches approximately 16 km/h and is easy to operate. Thanks to the large steering angle of 42° and a small turning radius, it is very well suited for operation in confined spaces. The yard loader comes standard with a pallet fork and a standard bucket, so you can start working immediately. Nodpfx Aerhh Sqjh Dedd With the 3rd and 4th hydraulic control circuits, a variety of attachments can be operated. The hydraulic quick coupler allows fast and convenient changing of front attachments. With high lifting capacity, the HR 2210 loader can also lift heavy loads of up to 980 kg to a height of 2.53 m. Standard wide tires (31x15.5-15) provide especially secure footing. The E-shift on the joystick ensures particularly comfortable operation of the HR 2210-B35. H&R loaders are technically and visually optimized in-house and thoroughly tested. Each machine additionally receives comprehensive corrosion protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. We provide a TÜV Süd certificate for each machine, enabling individual operating approval according to §21 StVZO (road registration / operating permit as a self-propelled working machine). Key Features of the H&R 2210-B35 Wheel Loader • Full equipment • Wide track for greater stability • Extensively optimized in Germany • Pallet fork included, manually adjustable • 150 cm standard bucket included • Comfort cab with heating, ventilation, and radio • Rear view camera with display • Joystick with float function and E-shift • Additional hydraulics for front attachments, 3rd and 4th circuit • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for towing • Rotating beacon • LED work lights front & rear • Wide tires 31 x 15.5 -15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE-compliant according to EU machinery directive • 1 year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 Gross: €27,304.55 Financing possible! Optional 2-year warranty €590.00 TÜV road registration / operating permit for working machine €595.00 Transport within Germany and Austria available at extra charge Technical Data Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lifting height: 2530 mm (bottom edge of standard pallet fork) Dump height: 1956 mm (standard bucket, tipped) Lift / Lower time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Tires: 31x15.5 -15 Spare parts and accessories available. Please provide your phone number with inquiries!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Leto izdelave: 2001 X - 548,6 mm, Y - 408,9 mm, Z - 459,7 mm Moč - 5,6 kW Obrati - 15.000 rpm Avtomatski menjalec orodja (ATC) - 30 Ndjdogx Aafepfx Ah Ded Miza - 599,4 mm x 378,5 mm Konus - BT40 Krmiljenje - CNC (Yasnac J300) Teža stroja: 4 tone Dimenzije stroja: 7' x 8' x 9'

Stanje: dober (rabljeno), LNS ECO LOAD bar feeder Ndsdpfx Aelg Aq Ash Dsd

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Ndsdpfx Aheia Rtds Dsd Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.020 mm, skupna dolžina: 3.300 mm, skupna širina: 5.100 mm, globina grla: 1.060 mm, težka dvostebrična tračna žaga za rezanje visoko legiranih vrst jekla avtomatsko podajanje obdelovanca z avtomatskim prepozicioniranjem CNC krmiljena spremenljiva hitrost podajanja in žaganja trakasti transporter za ostružke Ndodpfjv Sfp Aox Ah Djd opremljena s popolnoma motoriziranimi Weisshaupt valjčnimi progami: - 10,3 metra zunanji dovodni valjčni transporter z 2 hidravličnima vpenjaloma za obrise obdelovanca - 9 metrov notranji dovodni valjčni transporter z 2 hidravličnima vpenjaloma za poravnavo obdelovanca - Maksimalna širina obdelovanca: 900 mm - vsak valj je motoriziran - nosilnost enega transporterja je 4 tone - 4 metri izhodni valjčni transporter: en transporter je opremljen s tehtnico za tehtanje obdelovanca po rezanju (Sartorius sistem) Maksimalna višina obdelovanca: 860 mm Hitrost žage: 16 > 80 m/min Dolžina tračne žage: 10260 x 80 x 1,60 mm Potrebna moč: 32 kW (100 A) Teža: 9 ton (samo stroj)

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set Ndsdpfx Ahek Egrpe Ded

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Nsdpfsh Rdwxox Ah Djdd Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: zelo dobro (rabljeno), Surface grinding machine SAACKE Grinding head with adjustable angle Nsdpfehpqf Ujx Ah Dsdd