Tračna žaga - avtomatska

KASTO HBA 320/420 PL

Leto izdelave: 2017, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Single-spindle copy milling machine with manual control and pneumatic clamping. The milling movement of the head is transmitted via an indirect lever system. Capable of continuous processing without rotating the workpiece, as well as machining steel up to 2 mm thick. Scratch-resistant worktable. Manual tracing stylus. Deflection Lever for Head Movement: Manual movement of the tool horizontally is facilitated by a lever to minimize effort. The handle height is adjustable for practical and ergonomic operation. Control Joystick: The lever allows vertical movement of the milling unit. The motor start button is integrated into the hand lever. The milling spindle is equipped with an ISO 30 quick-change tool holder; four tool holder slots are located on the side of the machine. Ffsdpfx Aeycgvisbvsw Stops and Roller Conveyors: Roller conveyors on the left and right support the machining of very long profiles. A system of manually adjustable stops, also available on both sides, ensures correct positioning of the workpiece in the machine and brings it into the processing area. Probe with 4 Diameters: The mechanical probe has 4 selectable positions for 4 different cutting tool diameters. It is positioned on the preselected template to guarantee precise and safe machining. Clamping Devices: The machine is equipped with manually adjustable horizontal pneumatic clamps to ensure secure and accurate fixation of the profile during processing.

Leto izdelave: 2013, stanje: rabljeno, Cutting diameter: 420 mm Bandsaw blade dimensions: 41 x 5600 mm Cutting width: 1.3 mm Control system: Simatic S7 Touch Blade speed: 17 - 110 m/min Saw motor: 7.5 kW Bar material diameter: 420 x 3000 mm Bar material diameter: 300 x 6000 mm Total power requirement: 30 kW Ffjdpod Izmaefx Abvew Machine weight: approx. 18.5 t Space required: approx. 12.5 x 5.0 x 2.5 m CNC sawing system with JAESPA Compact 4S band saw, equipped with round steel magazine and discharge gripper for sawing round bars from 50 to 420 mm. Includes 6 storage compartments with a maximum bar weight per compartment of 3,400 kg. Cut lengths: 20 – 1,000 mm. Like-new condition, approx. 1,000 working hours.

Stanje: dober (rabljeno), Shielded gas welding machine, shielded gas welding unit, arc welding system, MIG/MAG welding system - Max. welding power: 400 A - Wire feed: 4-roll drive Fedewl Dptspfx Abvsfw - Design: Water-cooled - Accessories: includes ground cable, detachable wire feeder, gas regulator, 4 m hose package - Quantity: 1 unit available - Dimensions: 500/1010/H1600 mm - Weight: 162 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 400 mm, največja širina rezanja: 400 mm, skupna višina: 1.720 mm, skupna dolžina: 2.600 mm, skupna širina: 2.400 mm, skupna masa: 2.200 kg, višina mize: 700 mm, Obseg rezanja okroglega jekla pri 90°: 400 mm, dolžina podajanja os X: 600 mm, dolžina tračnega lista: 5.700 mm, širina tračne žage: 41 mm, Fully hydraulic high-performance band saw, built with extra heavy-duty construction, featuring a horizontally parallel-moving saw band for cutting profiles, pipes, and solid materials of all grades, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for the use of both bimetal and carbide tipped saw bands. Saw unit constructed in solid polymer concrete for maximum smooth operation and extended blade life. The saw unit is guided by two vertical square columns (dual column guidance) with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping by two horizontal frame clamping vices. Material feed via an integrated, non-driven roller conveyor with twelve transport rollers, allowing even short remnants to be transported easily. Year of construction: 2004 Cutting capacity round: 400 mm Cutting capacity square: 400x400 mm Automatic feed length: 600 mm Multiple automatic feed: 99999 mm Variable cutting speed: 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material table height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant piece length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Additional features: - Coolant system - Full enclosure - CNC control - Idle monitoring - Saw band tracking control - Side guide rollers - Height measurement system Ffodpfx Aeupvrxebvow - Light barrier

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, 5-osni dvoglavi žagalni stroj FOM INDUSTRIE KEOPE E5 6,6 m Leto: 2019 Stanje: odlično, kot nov Oprema (standardna in dodatna): - 2 žagini listi iz volframovega karbida, Ø 600 mm - Minimalna razdalja med rezalnima glavama: 470 mm (pri glavah pod 90°) - Maksimalna razdalja med rezalnima glavama: 6,6 m Ffsdjwk R A Djpfx Abvew - 4 vertikalni in 2 horizontalna prijemala (za postopno vpenjanje) - Sistem za mazanje rezila z mikrodoziranjem čistega olja - Priprava za odsesavanje odrezkov in hlapov - Motorji žagin rezil, trifazni, 5 KM (3,7 kW) – 230/400 V – 50 Hz. Hitrost vrtenja rezila 2400 min⁻¹ - Vrtenje rezalnih glav med 22,5° in 140° (osi Y in Z) z elektronskim nadzorom (vertikalna os) - Notranje nagibanje rezila med 90° in 45° (osi W in U) z elektronskim nadzorom (horizontalna os) - Premikanje premične glave (os X) z elektronskim nadzorom - Maksimalna hitrost premične glave: 25 m/min - Hidravlično podajanje žaginega lista (nastavljiva izhodna hitrost – hiter povratek) - Komplet za dvigovanje profilov - Dovodni valjčni transporter, dolžina 2,2 m, širina 400 mm (na premični glavi) - 3 vmesna pnevmatsko dvižna podporna mesta - Transportni trak za odrezke - Tiskalnik etiket - Programska oprema FSTCut - Programska oprema za posebne odrezke (nadstandardne in super-minimalne mere) ter posnemanje profilov za reze pod 45° - Programska oprema za postopno rezanje, vključuje dodatno površino na fiksni glavi, rezi pod 90°, dvoročno upravljanje - Odsesovalec/industrijski sesalnik

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results Ffsdpfx Abjd Iin Hjvjw · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm Ffjdpfx Abjwigavjvew +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Maximum vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Saw blade motor power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Ffjdpfot Hw N Tox Abvew Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Leto izdelave: 2008, stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm Fodpfxomidyis Abvofw - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Leto izdelave: 2004, stanje: dober (rabljeno), številka stroja/vozila: 2004-3-11A, - Manual feed of the milling unit - Working table height adjustable via handwheel Fodpfjf E Higsx Abvofw - Horizontal and vertical material clamping - Cutter diameter up to 250 mm - Max. milling height: 150 mm - Max. milling depth: 80 mm - Max. milling length: 305 mm - Angle-adjustable fence left & right: 20° – 90° - Spindle speed: 4,500 rpm - Drive: 400 V, 3.2 kW - Compressed air connection: 6 – 8 bar - Air consumption per work cycle: 10 l - Pneumatic profile clamping - Table base frame - Space requirement: approx. W 1,100 x H 1,300 x D 700 mm - Weight: approx. 200 kg