Restavracijska pivovarna

Kaspar Schulz

Complete production and bottling plant from a brewpub, consisting of the following components: 1. Milling section: grist mill with malt intake hopper and tubular chain conveyor system for milled malt. 2. Brewhouse: 2-vessel brewhouse (Kaspar Schulz, built 2013) as a brew block with copper-clad stainless steel vessels. Wort cooling via a freestanding plate heat exchanger (API Heat Transfer, built 2013) with downstream wort aeration. Also included is a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and maturation cellar: 4 cylindroconical fermentation and maturation tanks (Kaspar Schulz, built 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and maturation tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature for these 7 cylindroconical fermentation and maturation tanks is controlled via a central control panel. In addition, there are 2 further cylindroconical fermentation and maturation tanks (Kaspar Schulz, built 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. Temperature control for these two tanks is managed by a separate control cabinet. 4. Bright beer cellar / serving cellar: 5 upright bright beer tanks (Kaspar Schulz, 2013) with dished heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling: siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in a stainless steel housing and a caustic tank in the base frame. Keg filling station with taps for direct filling of kegs from the bright beer tanks. 6. Utility equipment: Refrigeration system (Hafner-Muschler, 2013) as an ice water storage unit with refrigerant R404a and 3 refrigeration compressors. Oil-free reciprocating air compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar, as well as refrigerant air dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank.

Machine (additional): complete brewery installation with copper-clad brewhouse.
Bdodpfxey Nm I He Altof
Brew length (wort per batch): 10 hl
Equipment: grist mill, malt conveyor system, 2-vessel stainless steel brewhouse (copper-clad), wort cooling unit, hot water tank, 9 CCTs (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), bright beer tanks (5 x 10.5 hl), siphon filler, keg washer, keg filling station, compressed air system, refrigeration system, N2 generator.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.