CNC stružnica

Karats LR-15N

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm Laodpfx Aeriulgeh Aek spindle/table distance: 9-509 mm spindle head - swivelling: 360° spindle taper: SK 40 spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Leto izdelave: 2008, Stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency-controlled Lsdjrdi Dlepfx Ah Aeak Limiting arms Hydraulic expansion Hydraulic hold-down arm

Stanje: novo, Experience unparalleled precision and performance with PERFECT surface grinding machines—now even eligible for BAFA subsidies! Our machines are available with grinding lengths from 500 mm up to 4000 mm and grinding widths from 150 mm to 1000 mm, also available as CNC-controlled variants. Some models are available from stock! Discover our comprehensive range of special accessories to make your surface grinder even more versatile. Whether you’re handling complex workpieces or demanding applications, our machines always deliver outstanding results. Rely on our many years of expertise and let us optimize your machining processes together. Invest in quality and precision—contact us today! Our range includes conventional and CNC-controlled machines (additional models available on request): Model FSM 2550 FSM 3060 FSM 4080 Grinding length 500 mm 600 mm 800 mm Grinding width 250 mm 300 mm 400 mm Distance table surface/spindle center 500 (option 600) mm 500 (option 600) mm 550 (option 650) mm Table size 250×500 mm 300×600 mm 400×800 mm Max. table load 250 kg 300 kg 400 kg Model FS-NC-50AHR FS-NC-60AHR FS-NC-70AHR Laodpfx Ahodzk T Ro Ask Grinding length 1020/1520/2020 mm Grinding width 500 mm 600 mm 700 mm Distance spindle center to table 600 (option 800, 1000) mm Clamping area 500×1000/500×1500/500×2000 mm 600×1000/600×1500/600×2000 mm 700×1000/700×1500/700×2000 mm Table load 800/1000/1000 kg 1200/1400/1400 kg 1500/1700/1700 kg ACCESSORIES: Grinding wheel, grinding wheel flange, wheel dresser, wheel puller, mounting elements, machine tool, balancing arbor, machine lamp, hydraulic unit with cooling fan, technical documentation in German, CE certification CURRENT STOCK MACHINES (see photos): New machines with grinding ranges 250x500 mm, 300x600 mm, 400x800 mm, 700x1520 mm Reconditioned machines with grinding ranges 250x500 mm, 300x600 mm, 400x800 mm Additionally, we have access to various used machines with large grinding capacities. Contact us for details! For further technical data, detailed descriptions, and accessories, please refer to the PDF file below. By the way, beyond affordable new and certified used machines, you can expect even more from us: • On-site consultation and solution development • Organization of transport to your facility • Delivery, installation, commissioning, and turnkey handover, and much more.

Leto izdelave: 2001, Stanje: rabljeno, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Lodpfodwf Dbox Ah Aoak

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible. Lsdpfx Aotyyn Hjh Aoak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Obdelovalni center - vertikalni Proizvajalec: Hyundai KIA Model: VX380TD Leto izdelave: 2007 Lasdpfeiw Ekdox Ah Ask Upravljalna enota: Fanuc serija 01-MC Območje števila vrtljajev vretena: 12.000 obr/min Priključna moč: 7 kVA Tip držala orodja: BT30 Število orodij: 20 Pomik X-osi: 500 mm Pomik Y-osi: 350 mm Pomik Z-osi: 350 mm Teža: 5.000 kg

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Lasdpfx Ahohq Uigs Ask Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Maks. hitrost podajanja: 1 – 30 m/min Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Vreteno: 88 mm Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz

Leto izdelave: 1990, Stanje: nepreverjeno (rabljeno), Pressure: 125 tons (2 x 63) Infinitely adjustable working speed: 0–10 mm/sec Return speed: 20 mm/sec Clearance between uprights: 950 x 550 mm Table surface area, front access: 950 x 820 mm Lodpogy Hzpofx Ah Asak Table surface area, side loading: 1220 x 550 mm Ram surface area: see table dimensions Maximum installation height: 700 mm Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Infinitely adjustable electronic stroke limitation

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Travel path X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes double pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Ledovnd Suepfx Ah Asak

Stanje: rabljeno, Leto izdelave: 1998, x-travel: 6000 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 1500 mm Control: Fidia Max. workpiece weight: 60,000 kg Control for tool magazine/tool changer: Siemens Spindle speed: 6.3 - 4000 rpm Clamping surface: 2500 x 4500 mm Magazine capacity: 48 positions Tool holder: SK50 Clearance between side columns: 3700 mm Rapid traverse: 30,000 m/min Total power requirement: 63 kW Lodpfou I E Emjx Ah Ajak Machine weight approx.: 150 t Space requirements approx.: 16.8 x 10.3 x 7.9 m