Hidravlična preskusna stiskalnica

AGEO GHP 125 HK

Stanje: dober (rabljeno), Litoželezni podstavek – talna plošča Uporabna površina (D x Š x V): 3600 x 1200 x 300 mm 4 T-utorji: širina 44 x 26 mm Opremljena z nivelirnimi nogami Teža: pribl. 3 t Ibjdeh Auahjpfx Ah Aof

Leto izdelave: 1999, Stanje: rabljeno, Press force 630 t Passage width 1390 mm Stroke 400 mm Table area 1390x1250 mm Total power requirement 75 kW Machine weight approx. 36 t Space requirements approx. WxDxH 3200x2800x4000 mm Iodpfx Aslp U R Sjh Aobf Rapid traverse - Working stroke Pressure and stroke cut-off Ram locking

Stanje: novo, Sheet thickness: 2.5 mm Roll diameter: 98 mm Throat depth: 160 mm Total power requirement: 1.5 kW Machine weight: approx. 0.35 t Space required: approx. 550x1400x1500 mm Supplied with: Ibodofv H Ehspfx Ah Asf • Manual version • 4 sets of rolls • Foot pedal control • Brake motor • Emergency stop

Leto izdelave: 2001, Stanje: rabljeno, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Isdpfx Ahsdwf Dbs Ajbf

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Ibsdpjx Ug Dofx Ah Ajf Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Ibodek Ixl Aspfx Ah Aof Shipping via freight forwarder.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Obdelovalni center - vertikalni Proizvajalec: Hyundai KIA Model: VX380TD Leto izdelave: 2007 Upravljalna enota: Fanuc serija 01-MC Območje števila vrtljajev vretena: 12.000 obr/min Priključna moč: 7 kVA Ijdpsiw Ekdjfx Ah Aebf Tip držala orodja: BT30 Število orodij: 20 Pomik X-osi: 500 mm Pomik Y-osi: 350 mm Pomik Z-osi: 350 mm Teža: 5.000 kg

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap - Integrated screen separation device after the separation flap Ibodpfofqpxisx Ah Aef - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Isdpfx Aed S Efaeh Asbf Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Isdpoia Rtdofx Ah Aebf Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or