ščipalna enota / zavora iz klobučevine / škarje za obrezovanje

TILGERT 1.650 x 4 mm

Leto izdelave: 1999, Stanje: dober (rabljeno), Driver / Plate Brake / Flying Shear for Slitting Line Strip width: 500 - 1,650 mm Strip thickness: 0.4 – 4 mm Ndodpfjgm E Rdex Abksd Number of driver rollers: 2

Leto izdelave: 1976, Stanje: Okvarjen nosilec rezervnih delov (rabljen), Manufacturer: Ahrens Year of manufacture: 1976 Model: 206 Z Technical Data: Sheet width: 1000 mm Sheet thickness: 0.7 mm Driven roll forming stations: 12 units Shaft diameter: 55 mm Drive power: 55 kW Entry width: 1100 mm Distance between frames: 650 mm Dimensions of individual components: Roller table 1: 6,000 x 1,700 x 1,700 mm Roller table 2: 6,000 x 1,700 x 1,700 mm Drive unit 1: 3,800 x 1,000 x 1,500 mm Ndedpfx Abjg Ul S Dskjd Drive unit 2: 6,300 x 1,000 x 1,500 mm Decoiler: 3,000 x 1,300 x 1,600 mm Shear: 1,700 x 650 x 1,000 mm Euro pallet: 1,200 x 800 x 1,200 mm Two trucks are required for the transport of the complete machine! Accessories / Special equipment: Uncoiler Profile shear Note: The control cabinet is missing. Therefore, the machine is not operational. The machine serves as a base frame for roof trapezoidal profiles with a high rib.

Leto izdelave: 1999, Stanje: dober (rabljeno), Driver/plate brake/flying shear for slitting line Strip width: 500 – 1,650 mm Strip thickness: 0.4 – 4 mm Njdsgm E Rlopfx Abksdd Number of driver rollers: 2

Leto izdelave: 1974, Stanje: rabljeno, Druck: 340 t Hubweg: 200 mm Tischgröße unten: 100 x 800 mm Abstand oben/unten: – offen 510 mm (Lichte Weite) – geschlossen 310 mm Nedpfo Du Uwjx Abkedd Neue Hydraulik- und Elektroanlage

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Njdpfxjx Ug De Abkodd Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: rabljeno, Leto izdelave: 1953, Turning length / mm Swing diameter over the table // mm Faceplate diameter / mm Faceplate diameter: approx. 3600 mm Centre height over the table: approx. 1500 mm Swing diameter over table: 2600 mm Swing diameter in pit: 3600 mm Swing diameter over bed: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at faceplate: 5000 mkg Nodpfx Ajua Iw Tobkjdd Faceplate ring gear pitch diameter: 1900 mm Main spindle bore: 120 mm Speed range normal: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Total weight: approx. 42.5 tonnes

Stanje: rabljeno, Linija za razrez na dolžino Delta-Alcos 72”x0,5”x60.000 lb (A3770) Proizvajalec: Delta / Alcos Njdjixqg Nepfx Abkodd Širina materiala: 36" - 72" Obdelovalna debelina: 0,048" - 0,530" Nosilnost: 60.000 lbs Notranji premer koluta: 16" - 24" Zunanji premer koluta: 72" Mejna trdnost: 50.000 PSI Smer delovanja: desno na levo Transporter za skladiščenje kolutov Vhodni voziček za kolute Hidravlično dvigalo in prečnik Stožčasti odvijalnik Enosmerna motorna zavora Drsna osnova Wichita hladilna zavora Pogonski pritisni valj Hidravlična luščilna miza Pogonski pomik noter in ven Pogonjen komplet stiskalnih valjev Delta izravnalni valji 4-Hi Leveler Število delovnih valjev: 9 Premer delovnih valjev: 8" Širina delovnih valjev: 82" Motorni vzpon in spust podložnih valjev Enosmerni motor in pogon Delta korektivni 4-Hi izravnalni stroj Število delovnih valjev: 19 Premer delovnih valjev: 4" Širina delovnih valjev: 82" Motorizirani podložni valji Motorno nastavljanje delovnih valjev Enosmerni motor in pogon Alcos mehanske škarje Spodrezne škarje Vhodni pogonski stiskalni valji Pnevmatska sklopka in zavora Izmenični motorni pogon Alcos nakladalnik s spuščanjem plošč Dolžina pločevine: 40’ Pogonski izhodni in končni transporterji Digitalna zaslonska plošča na dotik Upravljalna postaja s potisnimi gumbi Digitalni prikazovalniki Hidravlika, elektrika, krmilje – trenutno nameščeno

Leto izdelave: 1990, Stanje: nepreverjeno (rabljeno), Pressure: 125 tons (2 x 63) Infinitely adjustable working speed: 0–10 mm/sec Return speed: 20 mm/sec Clearance between uprights: 950 x 550 mm Table surface area, front access: 950 x 820 mm Table surface area, side loading: 1220 x 550 mm Ram surface area: see table dimensions Maximum installation height: 700 mm Ndsdpfx Abegy Hzpekjd Stroke: 500 mm Weight: 5,500 kg Height: 2,900 mm Drive power: 18.5 kW 2 hydraulic cylinders with precision synchronous control Infinitely adjustable electronic stroke limitation

Stanje: novo, Leto izdelave: 2025, *TFON Leveltech® izravnalni stroj – serija Leveling Machine -Modeli: M-5560, M-5511, M-5513, M-5516 -Inženirsko zasnovani za natančno izravnavanje materialov v območju debelin 1,0 mm do 15,0 mm, ti modeli omogočajo fleksibilnost pri širini materiala ter napredne upravljalne funkcije za optimalno delovanje. -Debeljina materiala: 1,0 mm – 15,0 mm -Maksimalna širina materiala: M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1.300 mm. M-5516: 1.500 mm. Ndodpfx Ashwb Uwjbkjd Minimalna dolžina materiala: 110 mm Nastavitev izravnalne reže: Servohidravlično / PLC krmiljeno Teža stroja: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18.000 kg M-5516: 19.000 kg Dimenzije stroja (D × Š × V): M-5560: 2.800 × 2.905 × 1.950 mm M-5511: 3.300 × 2.905 × 1.950 mm M-5513: 3.500 × 2.905 × 1.950 mm M-5516: 3.700 × 2.905 × 1.950 mm

Stanje: dober (rabljeno), 17 straightening rollers, Ø 54 mm Strip width: max. 1,450 mm Nsdpebifryjfx Abkodd Strip thickness: max. 2.5 mm