Težka prikolica

Kampe SLA VRA 54265

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Psdpfjfrvzvox Aczepl Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2024/121/47, premer žaginega lista: 420 mm, GRAULE crosscut and mitre circular saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Pjdetwz Tlspfx Aczjpl Blade tilted at 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine tiltable from behind on both sides by hand crank: from 90° to the left up to 45° and to the right up to approx. 30°, up to approx. 60° 1 pc. TCT (carbide-tipped) circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative hook angle for wood 1 pc. machine stand

Leto izdelave: 2023, Stanje: novo, Fully Automatic Orbital Stretch Wrapper SPINNER 1000s Application: Packaging, bundling, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in feed-through direction General Technical Data: - Main motor power: 1.5 kW - Max. ring rotational speed: 80 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 770 kg Standard Equipment: - Powered conveyor (infeed and outfeed) for automatic product feeding - Adjustable ring speed - Adjustable stretch tension with mechanical brake system - Automatic stretch film clamping and cutting system - Automatic film attachment system - Pneumatic front and rear hold-downs that press from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for machine parameter adjustment according to product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Infeed and outfeed rollers - Bubble wrap unit Technical Features: Ppsdpjfuwg Iofx Aczol Wrapping Sizes: - Max. length: unlimited - Min. size (WxHxL): 100x18x550 mm Conveyor Functions: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 12 m/sec - Load capacity: 100 kg/m Stretch Film Properties: - Max. width: 200 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Pjdpfx Acjk H Ic Uszspl Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Psdpfoizkhvjx Aczjpl Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: novo, 40 MP je enoglavna žaga, ki reže od zgoraj, s premerom žaginega lista 400 mm. Primerljiva z Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom ipd. Žagarsko mizo se lahko ročno nastavi pod kotom +/- 45°. Nagib žagine glave se lahko ročno nastavi od 0° do 45° navzven. Enoglavna žaga 40MP je opremljena z vodoravnimi vpenjalnimi cilindri za pravilno vpenjanje profila, minimalnim mazalnim sistemom in mehansko zaščito žaginega področja. Pjdpfxerfapas Aczepl Oglejte si tudi naše rabljene skladiščne stroje znamk Emmegi, Elumatec, Pressta Eisele ipd.

Stanje: novo, as well as other types, as a package Podpef Ddzqsfx Aczopl

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Pedpfjdy Hm Dex Aczjpl Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Ppsdpfoucfwpsx Aczol

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Podjiu Smbspfx Aczjpl Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package