Stiskalnica za les

Kallesoe LV7821

Stanje: rabljeno, Leto izdelave: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will be in operation until the end of September 2023 and can be inspected at any time. Technical data - Max. capacity: 120 pallets/hour (at 10 wraps) - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm Lhjdpfx Ael Uyfkekhen - Weight: 2,000 kg - Film width: 500 mm - Main frame made of steel - Rotary ring with dispenser for pre-stretch film - Motorized pre-stretch system - Cutting and sealing system Scope of delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016

Stanje: zelo dobro (rabljeno), Loos 1000 kW ogrevalni kontejner, nadomestno ogrevanje s plinskim gorilnikom. Možna predelava na olje ali bioplin. Lodpsy Evltefx Akhehn

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Lhsdpfxogu U Ite Akhon Used, untested robot. No teach pendant. Not tested.

Stanje: rabljeno, Double edger TRAK-MET PTF2-4, year 2022, like new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 blades, 1150 kg Lhjdpfxevr I H Do Akhen Prices subject to change without notice. Errors and misprints excepted.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), vrsta hlajenja: zrak, Oprema: hladilna enota, Condenser Lhsdpfevllxdex Akhjn Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: novo, Leto izdelave: 2024, Delovna širina: 600 mm Delovna višina: 5 mm do 300 mm Minimalna dolžina obdelovanca: 250 mm Agregati: 2 1. Žagalni agregat Random System: izgled žagalnega reza 2. Krtača: Tynex, premer 210 mm Nastavitev višine: električna Prikaz višine: digitalni Podajalna hitrost: 4 - 14 m/min Moč motorja žagalnega agregata: 1,1 kW Moč motorja krtače: 4 kW Lsdsupy Spepfx Akhjhn Moč motorja podajanja: 0,37 kW Dolžina stroja: 1400 mm Širina stroja: 1500 mm Višina stroja: 1600 mm Teža: 700 kg

Leto izdelave: 1982, stanje: rabljeno, V dobrem stanju Lhjdpfxedq Ug Ij Akhsn

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Stroj za sekljanje/drobljenje lesa Vecoplan VHZ 1300, kladniški mlin CPM, ventilator in ciklonski filter JFK. Stroj je v dobrem stanju in je deloval približno 500 ur. Linija je opremljena z vsemi transportnimi trakovi. Lsdpoympx Uofx Akhehn

Stanje: rabljeno, številka stroja/vozila: 008350, Vrsta obdelanega roba: tanek rob, močan rob, masiven les Lhodpfx Ajx A Tgyekhen Lepilni sistem: PUR, vroč zrak Obdelava spoja: da Multifunkcijska enota: da Maksimalna hitrost podajanja: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 Ljdpfxegwbbqj Akhohn No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)