Drugi

KAESER M82 1600 MT HFA1 Kompressor/Anhänger

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.400 kg, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 2 osi, obratovalna teža: 2.400 kg, lastna masa: 2.400 kg, Leto izdelave: 2018, obratovalne ure: 1.030 h, prva registracija: 11/2018, Oprema: AdBlue, Na voljo je tipska ploščica, Gradbeni kompresor Proizvajalec: Atlas Copco Tip: XAVS 186 Leto proizvodnje: 2018 Obratovalne ure: cca 1031 h - Največji tlak: 14 bar - Kapaciteta: maks. 11,4 m³/h - Moč: 104 kW Bwsdpfev Nv H Hox Afnoi - Motor: John Deere

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Bsdpfoxnnd Dsx Afnowi Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Construction Compressor Manufacturer: Atlas Copco Model: XAVS 186 Year of manufacture: 2016 Operating hours: approx. 657 h - Maximum working pressure: 14 bar - Maximum flow rate: 11.4 m³/h - Power: 104 kW - Engine: John Deere 4045HAC05 - Aftercooler - Water separator - Weight: approx. 2.45 t Bwsdpfswubzrox Afnoi

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, obratovalne ure: 2.528 h, Compressor Kaeser M 56, year of manufacture 2003, 2,528 operating hours, cyclone separator, with additional air cooler, flow rate 5.6 m³, 4-cylinder Deutz, serial no. TP1229014603 Bjdpeun Rldefx Afnswi

Stanje: rabljeno, Leto izdelave: 2022, Intended use: Construction Drive: Wheel Unladen weight: 749 kg Engine make: Kubota Serial number: APP866746 Transport dimensions (L x W x H): 2.29 x 1.35 x 1.55 m Please contact PFEIFER GROUP for further information. Bjdpfetr I Ukex Afnowi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, nosilnost: 10.000 kg, Special price: 6 months used, as new, with warranty. Self-centering complete set, dual drive, synchronous operation. Includes hand remote control with digital display and foot remote control. Suitable for diameters from 300 mm to 3500 mm. Drive roller diameter: 300 mm. Dimensions: Length 1900 mm x Width 470 mm x Height 390 mm. Infinitely variable speed: 200 - 1200 mm/min. Motor: AC 380 V. Bwodpow D Rhasfx Afnei

Stanje: rabljeno, Leto izdelave: 1997, Delivery pressure: 7.5 bar Output capacity: 0.6 m³/min Motor speed: 3000 rpm Total power requirement: 4 kW Machine weight: approx. 350 kg Space requirement: approx. 1800 x 650 x 1300 mm Equipment: - Kaeser TA5 refrigerated dryer - 180 liter compressed air receiver Bedpfewrztiox Afnewi

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Kompresor DIESEL ATLAS COPCO XAS46DD po servisu! Kompresor registriran na Poljskem. Tehnični podatki: zmogljivost 2,60 m3/min; delovni tlak 7 Bar; motor DEUTZ F2M1011; delovnih ur 1355h! Kompresor popolnoma delujoč, pripravljen za delo, garancija. Neto cena: 13.500 PLN. Bruto cena: 16.605 PLN. Bwsdox A T D Sjpfx Afnsi

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 670.000 km, moč: 350 kW (475,87 KM), prva registracija: 07/2015, vrsta goriva: dizel, konfiguracija osi: 6x4, naslednji pregled (TÜV): 04/2025, barva: siv, emisijski razred: Euro 6, Leto izdelave: 2015, Oprema: ABS, klimatska naprava,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Capacity 400 liters Usable volume 300 liters Maximum fill weight 850 kg Max. workpiece dimensions 850 x 200 mm Max. individual workpiece weight 30 kg Rotation speed 4.0 - 15.0 rpm Drum width (internal) 925 mm Drive motor 380 V Machine weight approx. 1,950 kg Dimensions (LxWxH) 3100 x 1600 x 2000 mm Good / well-maintained condition (!!) - machine checked and tested - machine video available - ?v=xxnCddCmXe4 Description: - LIMA cleaning machine * For long concrete formwork components, formwork clamps * For flame-cut, plasma-cut, and laser-cut parts * For stamped and sawn parts - Environmentally friendly, cost-saving, low noise - Drive via 5-fold V-belt through worm gear - Maintenance-free spherical roller bearings - Entire machine is highly sound-insulated - Dust extraction system installed as standard - Adjustable drum run time - Variable speed regulation - Drum can be brought to any position by jog mode - Space-saving due to compact construction - Extraction unit built into the machine - One-lever quick drum lock - Machine mounted on vibration dampers - Generous discharge area, suited for Euro standard containers Bjdpfxexaa Ulo Afnjwi - Free access for forklift or pallet truck Working principle: - The parts to be processed are deburred, descaled, and derusted by friction against each other. - The closed construction reduces noise emission during deburring to only 68 - 72 dB(A). - The integrated dust extraction system automatically removes any dust generated during processing. - Oily stamped and sawn parts can also be processed. - For this process, sawdust is added to the drum. - The dust extraction system can be individually switched on with a time delay relay. - This ensures the parts are first de-oiled and dried. - Only after this process does the dust extraction system automatically activate to vacuum the sawdust from the drum. - Optimum processing is ensured by presetting the drum speed. - The deburring machine LIMA-400 L can be installed at any location, provided a solid floor/foundation is available. - After the process cycle, the drum stops in position for quick opening of the drum door. - One process cycle takes approx. 20 minutes.