Traktor

Club Car Precedent

Leto izdelave: 2004, stanje: dober (rabljeno), Golf avtomobil CLUBCAR PRECEDENT, 2-sedežni, golf avtomobil/golf vagon, 2004, z vgrajenim polnilnikom, modre barve. Video lahko pošljemo prek WhatsAppa. Stalna zaloga, glejte spletno stran. Cene veljajo za prevzem v Nulandu. Kdedpjzz Sbgofx Agfet Podjetje Van de Wert Trading B.V. ima spreminjajočo se zalogo strojev, tovornih vozil, priklopnikov in dodatne opreme. Vse naše dobave potekajo po trgovskih cenah, v stanju »kot je«, brez garancij (glejte naše splošne pogoje). Za ogled in/ali testno vožnjo se lahko brezplačno dogovorite za termin. Predhodno nas pokličite, saj nismo nenehno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: Kedsyidvdopfx Agfjdt - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: rabljeno, vrsta goriva: električni, gorivo: elektrika, Proizvajalec: Clubcar, ZDA. Kdsdpfxozni Rfo Agfet

Stanje: novo, Leto izdelave: 2023, Manufacturer: CGM e41 Continuous output (3-phase): 41.0 kVA / 32.8 kW Maximum output (3-phase): 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA – approved for stationary applications only Cooling system: Water-cooled Fuel: Diesel Cylinders: 4 Displacement: 3,319 cm³ Aspiration: Naturally aspirated Speed: 1,500 rpm Fuel consumption at 3/4 load (L/h): 8.5 Generator: MECC ALTE Type: Brushless AVR regulation Digital control unit: ComAp AMF Dimensions & Weight: Length: 2,000 mm Width: 850 mm Height: 1,275 mm Dry weight: 880 kg Fuel tank capacity: 200 l Kodsq A U Aiopfx Agfjdt Oil catch pan Engine coolant pre-heater Battery trickle charger 3-way valve Soundproof canopy: RAL 5015 Sky Blue Base frame: Black

Stanje: zelo dobro (rabljeno), Tacchella Macchine grinding machine type 40LR in very good condition. Kodpfx Asivg E Hegfodt Specifications: Longitudinal travel X-axis: 400 mm Cross travel Y-axis: 250 mm Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimensions: 150x20 mm Weight: 800 kg

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Premer elektrode: 0,5 do 3 mm Pot gibanja: 300x400x350 mm Certifikat CE potrjuje najvišjo možno stopnjo varnosti Celotna serija izdelkov je zasnovana za namestitev na površini Elektrode: premer 0,5–3 mm Pot gibanja po osi X: 300 mm Pot gibanja po osi Y: 400 mm Pot gibanja po osi Z: 350 mm Kodef Hmn Ajpfx Agfjdt Pot gibanja po osi W: 300 mm Hitrost gibanja po osi C: 30–60 mm/min Hitrost hitrega gibanja po osi Z: 120 mm/min Razmerje stranic: 300:1 Dimenzije mize: 320x440 mm Maksimalni delovni tok: 30 A

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° Kodpfx Agjv Ig Avjfodt - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Leto izdelave: 1988, stanje: dober (rabljeno), številka stroja/vozila: D 05103, Ref. No. 13439 Kdedpfjk D Ewgjx Agfot Technical Data: - Polishing disc/grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions approx. 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Required space approx.: W 1100 x H 2450 x D 800 mm - Weight approx.: 300 kg

Stanje: dober (rabljeno), Vice, bench vice, engineer's vice, parallel vice, heavy-duty vice - Parallel vice: jaw width 150 x 30 mm - Clamping width: 190 mm Kdsdpfskvrpwex Agfst - Quantity: 1 unit available - Dimensions: 485/210/H190 mm - Weight: 26 kg

Stanje: novo, Leto izdelave: 2020, skupna dolžina: 2.100 mm, Traktor Club Car Tempo, električni pogon, letnik 2020 Kdodpfx Agsxpx Uiofot