Vijačni kompresor

KAESER SX6TA5-180

Stanje: novo, Leto izdelave: 2025, The Automatic Basket Cleaning System XTON Smart Cleaner SC1000™ is constructed from stainless steel AISI 304 and acid-resistant stainless steel AISI 316. It is designed for use in various industrial sectors and the automotive industry. The cleaning system is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA fluid, which, in combination with optimal temperature and pressure, effortlessly removes all types of contamination. The system operates in a closed loop at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to prevent rapid cooling of the cleaning fluid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, and safe, user-friendly operation. The cleaning system is designed for the automatic removal of contaminants from surfaces made of cast iron, aluminum, and steel. The design and construction of the Smart Cleaner SC1000™ meet the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Sensors for liquid level and temperature - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-liter starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Diameter of rotating basket: 100 cm - Load capacity of rotating basket: 300 kg - Adjustable working time: 0 – 99 min - Washing/fluid temperature: up to 80°C - Heating power: 9 kW Hnjdpfsu R Urhox Aagsk - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Protection rating: IP 54 - Declaration of conformity: CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, potovalna razdalja osi X: 800 mm, pomik osi Y: 700 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, Proizvodni paket opremljen z: 600 l filtrirnim sistemom IKZ obrazec AD Rotacijski zaslon Merilna sonda MP10 Nova vretena je leta 2023 stala 13.500 EUR X os: 800 mm Hnodpfsw Rdl Djx Aagok Y os: 700 mm Z os: 600 mm A os: 90° B os: 360° Dolžina mize: 900 mm Širina mize: 630 mm Nosilnost mize: 800 kg Pomik X osi: 30.000 mm/min Pomik Y osi: 30.000 mm/min Pomik Z osi: 30.000 mm/min Vpenjalni sistem orodja: 40 ISO/BT/MK Moč vretena: 15 kW Število obratov: 12.000 rpm Menjalnik orodij: 30 pozicij IKZ: 20 bar Število krmiljenih osi: 3+2 Transporter ostružkov: Da Hladilni sistem: Da Dolžina: 6.000 mm Širina: 4.000 mm Višina: 2.700 mm Teža: 9.000 kg

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Hnodpfx Aaowp D Nbjgjk Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-osni CNC obdelovalni center Leto izdelave: 2002 Krmilje: Heidenhain 430 X-hod: 800 mm Y-hod: 700 mm Z-hod: 600 mm B-os: avtomatska nagibna rezkalna glava Hnedpfxex Dlf Re Aagjk C-os: NC rotacijska miza 900x630 mm Teža obdelovanca: 800 kg Vpenjalo orodja: SK40 Menjalnik orodij: 60 mest Dodatna oprema: - Transporter ostružkov - Notranje hlajenje 40 bar - Ročno kolo - Merilna sonda Heidenhain TS 642

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, višina obdelovanca (maks.): 1.230 mm, premer obdelovanca (maks.): 1.250 mm, hitrost vretena (min.): 18.000 obr/min, največja hitrost vretena: 18.000 obr/min, Krmiljenje Heidenhain iTNC 530 Menjalnik orodij za 60 orodij Avtomatska glava +180/-7° brezstopenjsko Hnodpfxow Ngips Aagok HSK A63 Število palet: 2 kosa Velikost palete: 1000*800 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Hjdpfou Rptyox Aagonk Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: dober (rabljeno), Traypacker / Wrap-around-Verpacker Trays und Wrap-around-Kartons Mindestverpackungsgröße L x B x H = 190 x 140 x 80 mm Maximalverpackungsgröße L x B x H = 460 x 350 x 250 mm 4-bahnige Maschine. Die Hotmelt-Anlage wurde 2018 überholt. Siemens S7 SPS-Steuerung, einfacher Formatwechsel. Verkauf im Ist-Zustand Hnodpfx Aaefxypiegek oder angepasst an Kundenanforderungen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, SERDI Sitzfräsmaschine für Ventilsitze im Zylinderkopf – Gebrauchtmaschine, in sehr gutem Zustand, einsatzbereit Hnjdpfx Asv Ild Seagok Technische Details: Abmessungen (L x B x H): 1690 x 1050 x 2170 mm Eigengewicht ca.: 1085 kg Max. Zylinderkopf-Abmessungen (L x B x H): 1200 x 500 x 450 mm Werkstückschwenkung quer: +42° bis -15° Min.-Max. Bearbeitungskapazität: 16 - 70 mm Schlittenwege: längs: 930 mm quer: 40 mm Kugel-/Zylinderhub (Radius): 9 mm Spindel: max. Spindelneigungswinkel: 5° Hub: 200 mm Motorleistung: 1200 W Drehzahl: 100 - 1200 U/min Anschlüsse: Stromversorgung: 2,5 kVA – 230 V – 1Ph – 50/60 Hz Luftdruckversorgung: 6 bar Luftvolumenversorgung: 300 l Geräuschpegel bei 400 U/min 72 dBA, bei 1200 U/min 82 dBA Bei Interesse nehmen Sie bitte Kontakt mit mir auf! Weitere Maschinen im Angebot: A-M, Serdi, Comec, AMC, Carmec, Kwik-Way, Serdi, PEG Kurbelwellenschleifen, Flachschleifen, Ventilschleifen, Ventilsitzfräsen, Druckprüfung, Teilewaschen, Hauptlagerbohren, Ventilführungs-Montagepressen, Vakuumtester

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, potovalna razdalja osi X: 750 mm, pomik osi Y: 600 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: SIEMENS, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 35.000 W, število osi: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It offers a working area with an X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle with a maximum speed of 24,000 rpm and a tool magazine with a capacity of 120 positions. It features a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional Equipment • Coolant tank with paper filter, 600 l • Touch probe • Chip conveyor • Electronic handwheel (remote control) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Hjdpfx Aajymcvmogsnk Taper Size HSK 63

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.730 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, skupna dolžina: 1.335 mm, skupna širina: 750 mm, skupna višina: 1.880 mm, tlak (maks.): 11 letvica, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, raven hrupa: 66 dB, vrsta zaščite (IP koda): IP55, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective delivery rate: 1.67 m³/min Rated drive motor power: 11 kW Drive motor protection class: IP 55 Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1,335 x 1,880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Hnodexnnd Dspfx Aagjk Refrigeration Dryer Power consumption: 0.49 kW Pressure dew point: 3 °C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment to EN 60204-1: Yes Scope of delivery: – Complete original documentation – 2x RFID cards – 5 m supply cable with 32A plug