Drsna namizna žaga

Kölle KFS40

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, dolžina rezanja (maks.): 2.000 mm, širina reza pri vzporednem vodilu: 1.100 mm, največja višina reza: 85 mm, premer žaginega lista: 350 mm, dolžina mize: 2.080 mm, vrsta nastavitve višine: električni, višina mize: 930 mm, širina mize: 1.150 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, moč: 5,7 kW (7,75 KM), zahteva za prostor dolžina: 4.000 mm, potrebna širina: 3.200 mm, Ta formatna krožna žaga je v zelo dobrem stanju in popolnoma funkcionalna. Kot brezhibna jo je pred prevzemom leta 2007 pregledalo podjetje Fa Sonic sys. Od takrat se stroj nahaja v delavnici za izdelavo lokov (lokostrelstvo) in deluje v zelo varčnem režimu, skupno manj kot 1 uro na dan. Navodila za uporabo so na voljo. Stroj je v delovanju in ga je mogoče kadarkoli preizkusiti. Stroj se nahaja v 31863 Bisperode (Hameln-Pyrmont). Razstavljanje, nakladanje in transport so odgovornost kupca. Nedpfx Abswxyguobokt

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Nksdpfsu Ixznjx Abbjt Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 1997, Connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, tiltable to both sides 45°, height adjustment via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, roller conveyor on the right with stop, cutting length: 3,200 mm, roller conveyor on the left with stop, cutting length: 2,200 mm. Njdpfx Abowhn T Uobokt

Stanje: dober (rabljeno), Leto izdelave: 1990, največja širina rezanja: 1.000 mm, največja višina reza: 140 mm, dolžina mize: 1.400 mm, moč: 5,5 kW (7,48 KM), Types: F 45, Machine no.: 90-8-86 Nsdpfx Aetxh Nisbbskt

Stanje: dober (rabljeno), Edge sanding machine, edge sander, sanding machine - Sanding height: 75 mm - Distance between guide rollers: 700 mm - Sanding length (shoe): 390 mm Nkedpfx Abocmh H Isbst - Dimensions: 780 x 300 x H520 mm - Weight: 40 kg

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Okvarjen gravirni stroj Deckel Nksdpfx Abjw H Rdtsbst

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Nksdpfx Abehp Rcrjbot Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: dober (rabljeno), Spindle moulder, table milling machine - Spindle moulder: with fixed spindle - Speeds: rpm - Motor power: kW - Dimensions: 1000/1870/H1040 mm - Weight: 560 kg Nksdpfx Abecl Svvsbjt

Stanje: rabljeno, Leto izdelave: 2008, Fully equipped with extended cutting length up to 540 mm including carbide special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative for aluminum cuts Used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 Nkodpjww Nd Tjfx Abbjt CE pattern tested Motor: 2 kW Brake motor Cutting height approx. 135 mm Extended cutting length approx. 540 mm Blade diameter approx. 350 mm Blade bore approx. 30 mm Tiltable right Tiltable left Machine stand Right roller table 3000 mm with stop and scale - RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Left roller table 5000 mm, type RO Feed brake Material fence made of aluminum Coolant spray device 2 x pneumatic workpiece clamps right & left Pressure reducer valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without warranty or guarantee

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 01910/88, Eugen Laegler Floor Sanding Machine Model: Vibrafor Motor Power: 1.1 kW Voltage: 220 V Vibrating sanding surface Nedpfx Abecb Au Sjbekt Dust bag included Location: 54634 Bitburg – inspection possible