Priklopnik sedeža z delovno ploščadjo

KÖGEL Multi Chassis, verstärkt, Bordwände

You can find our complete stock of vehicles, including those immediately and shortly available, on our website.

Extract from the equipment list. Complete configuration available upon request.

Frame
* Standard ladder frame in lightweight steel construction with through-going cross members
* Coupling plate 8 mm thick, fitted with a two-inch kingpin according to DIN 74080 / ISO 337

Chassis
* Axle lift mechanism on axle 1
* Manufacturer of your choice Kögel – tri-axle unit, with disc brakes Ø 430 mm, offset approx. 120 mm
* Air suspension with approx. 180 mm travel

Vehicle tyres
* Tyres: 6x 385/65 R 22.5 UNIROYAL TH 50

Chassis attachments
* Landing legs (manufacturer of your choice, Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-sided operation on the right-hand side in the direction of travel
* Spray suppression system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for tri-axle units with 385/65 R22.5 tyres, consisting of 1 pair of quarter-circle mudguards in front of the axles, 1 pair of straight mudguards with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle mudguards with spray flaps behind the axles
* Storage box for: 10 dropside boards, folding stanchions, and rear panel doors or tailgate. Fully enclosed on all sides, splashwater-protected, also serves as a side underrun protection device
* Ground clearance (front) 220 mm
* 2 waterproof plastic toolboxes, interior dimensions approx. 545 x 400 x 400 mm. Installed in the rear, 1x left and 1x right
* Raised, rigid rear underrun guard made of steel in accordance with ECE-R58
* One pair each of extendable warning panels for overwidth loads, retro-reflective red/white, with LED lighting, coiled cable, and plug connector. Located at the front and rear of the vehicle

Braking / Air suspension system
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug
* WABCO EBS system
* Air suspension system including 1 lift and lower valve, fitted left-hand side behind the axle unit. Driving position is set automatically
* 2 non-interchangeable ISO 1728 34410.010 coupling heads at the front. Steel air tanks for braking system and air supply (EN 286-2)

Floor
* Panel floor approx. 30 mm thick
* Floor jointed all round
* Stake pockets for square tube insert stanchions approx. 80 x 80 mm, arranged according to drawing J9: 8 stake pocket rails (18 stake pockets per rail, 4 outside and 10 central per rail)

Body
* Meets body strength in accordance with EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg

Front wall
* Storage for max. 14 square tube insert stanchions approx. 80 x 80 mm (length approx. 1,990 mm) inside the front wall
* Front wall approx. 2,000 mm high with steel volume corner stanchions, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) at the front wall in accordance with EN 12640

Rear wall
Caedpfx Afox Dgikoqoa
* Folding rear wall approx. 600 mm high made of aluminium hollow profiles with 3 tension anchors and T-bolt locks, 2 foldable steps on the inside
* Foldable steel corner stanchions at the rear matching the sideboard height

Side wall
* 4 pairs of folding stanchions at sideboard height, 43540.380 VarioFix steel perforated outer fram

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.