Chip extraction blower 37 kW

JKF JK-55K

Leto izdelave: 1982, stanje: rabljeno, V dobrem stanju Cedpfxsdq Ug Io Ag Eehd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Leto izdelave: 2003 Chjdpetr A Evefx Ag Eed Napetost: 400 V Frekvenca: 50 Hz Teža: 3200 kg Število osi: 3

Stanje: novo, Leto izdelave: 2025, Fully automatic case erector for an efficient and economical packaging process. Cartons are automatically picked from the magazine, erected, and sealed from the bottom (single direction). The erected boxes are then conveyed onto a transport belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; Carton size in mm: L(350-650)xW(150-500)xH(100-500); max. machine cycle rate (idle): 9 cycles/minute; Power supply: 110/220V, 0.3kW; Air supply: 5-6 bar, 0.4m³/min; Tape width in mm: 48/60/75; Machine dimensions: L2200xW1900xH1450mm; Weight: 530kg. Cjdpfx Agsv Nkvij Eehd Please note that our prices for new machines are often below average used equipment prices. Feel free to contact us with your packaging requirements. - Usually, 30-50 different new machines are available for immediate delivery from stock. For custom-built equipment, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines that utilize a powerful rotary arm in combination with a reliable pre-stretch system to achieve precise wrapping of pallets. This advanced technology allows the load to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with lightweight or unstable goods, as well as for loads that are difficult to maneuver. - Maximum product height: 2,000 mm Chsdpfx Asr Nc Speg Eod - Maximum pallet dimensions: 1,200 x 1,200 mm - Minimum weight: 45 kg

Stanje: pripravljen za uporabo (rabljen), Saw blade diameter: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Mitre cutting range at 45° rectangular: approx. 40 x 120 mm Chsdsl Ra Uijpfx Ag Ejd Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirement: 850 x 600 x 1600 mm

Stanje: nepreverjeno (rabljeno), Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm Csdpfsx H Al Nex Ag Eshd > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, skupna masa: 755 kg, volumenski pretok: 316,2 m³/h, PROD. KAESER MODEL - ASD47 SFC Chjdora Akzepfx Ag Esd NR SER. - 3068 ROK PROD. - 2013 MOC (kW) - 25 WYDAJNOŚĆ (m³/min) - 1,07–5,27 CIŚNIENIE (bar) - 8,5 PRZEMIENNIK CZĘSTOTLIWOŚCI (FALOWNIK) - tak WBUDOWANY OSUSZACZ - nie WYMIENNIK - tak

Stanje: rabljeno, Screw Compressor KAESER Type BS 50 Serial No. 402852 Year of manufacture: 1990 Free air delivery: 5 m³/min Codpsiyu Ifjfx Ag Ejhd Operating pressure: 7.5 bar Main motor power: 30 kW Mains connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 operating hours (read off) - 749.00 load hours (read off) - Soundproofed Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a backup compressor and has only a few operating hours

Stanje: rabljeno, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used support frame for roller conveyors for sale here. When placing an order, please specify the required upright heights and depths! Scope of delivery includes: 01x Support frame, used Material finish: fully galvanized Upright height: 250 to 700 mm (freely selectable by you) Upright depth: 300 to 700 mm Codpfsdf S Eyex Ag Eehd (freely selectable by you) Other heights and depths can be manufactured on request. Our services at a glance: (Prices on request) - Assembly and installation Please note our general assembly terms and conditions. - Racking inspection Racking inspection according to DIN EN 15635, performed as per the requirements of BGR 234 visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Scheuch cyclone with rotary valve and spark extinguishing Chjdpfouvdplox Ag Eed for wood chips Cyclone designed as bunker or silo setup with attached rotary valve Model: fru v 1000-04/014-B Serial No./Year: F-1633/14 The unit is dismantled and immediately available