Dvojna poševna žaga

JAESPA CONCEPT 250 GTH

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Gedpeu Sbpvsfx Afwsua Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Gsdpsrfx Utefx Afwjua Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Gujdet Hwucopfx Afwja Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Leto izdelave: 2026, stanje: novo, Image 1: 10-ton machine jack with multiple adjustable lifting claws and integrated hydraulic unit, external hydraulic connection, low dead weight. Gsdpfxjgi Dkcj Afwjua Other images: Additional HTS ECO-Jack S-Series machine jacks – German quality factory tool – NEW – available in various load capacities from 3 to 25 tons, integrated 520 bar hydraulics, rotatable pump lever, swivel feet, and adjustable lifting claw. External pump connection available from 10 tons load capacity, double pump from 15 tons load capacity onwards. Please contact us for load capacities and other versions up to 50 tons. Delivery usually available from stock.

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS260 bandsaw for cutting pipes, profiles and bars is widely used in all metalworking workshops where precision, quality and cutting speed are important. This model is equipped with a swiveling arm adjustable from 0–60°. The robust frame construction ensures precise and quiet operation. It features a removable chip tray for easy cleaning! Machine Features The horizontal metal bandsaw with a swiveling arm allows perpendicular cuts as well as angled cuts in the range of 0 to 60°. Material can be fed manually or via any mechanical device, while the blade feed is automatic. The blade guides are equipped with special carbide plates and bearings. This greatly enhances blade tracking, blade life, cutting accuracy, and cut quality. Carbide guidance significantly reduces wear on both the machine and the blade. The machine is equipped with an efficient coolant pump with a closed circuit system. The saw arm is made from a single cast iron piece, and together with the 27 mm wide blade used in this saw, it allows reliable, repeatable serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features a quick clamp. The blade guides are equipped with carbide plates – solid carbide inserts – and a ball bearing system. It is THESE CARBIDE GUIDES that ensure the precision and straightness of the cuts. The upper surface of the base is formed as a tray for draining coolant and collecting chips generated during cutting. A cast iron work table with a swiveling arm and a control panel on a separate arm are mounted to the base. During the cutting process, the main cutting motion is the movement of the saw blade, while the feed is provided by the downward movement of the arm. The feed speed (cutting speed) is adjustable via a hydraulic cylinder. Feed speed is adjustable from the machine's control panel. There are two selectable blade speeds: 35 and 70 m/min. After the cut is completed (when the arm reaches the lower position), the blade drive is automatically switched off. Safety is ensured by blade guards and micro-switches that cut off power to the motor at the end of the cycle or upon opening any of the covers. Additional protection includes automatic machine shutdown in the event the blade breaks. Technical Specifications: - Blade size [mm]: 2520 x 27 x 0.9 - Blade tension: Mechanical (manual) - Blade speeds [m/min]: 35, 70 - Arm descent: Stepless – hydraulic cylinder - Vise base height [mm]: 860 - Saw wheel diameter [mm]: 300 - Saw frame swivel range [°]: 0–60 - Power supply: 3 phase, 400V - Main motor power [kW]: 1.1 / 1.5 Gsdpfoudi Uzsx Afwjua - Coolant pump motor power [kW]: 0.05 - Dimensions with base [cm]: 150 x 80 x 140 - Weight [kg]: gross/net – 210 / 180 kg Included in delivery: - 2 x M42 saw blades - 5L Emulgol coolant - Magnetic chip collector ZW580

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, dolžina mize: 760 mm, širina mize: 510 mm, obremenitev mize: 1.000 kg, For sale is a 3-axis CNC milling machine from Hurco, model VMX 24. Technical data: Guedev Tcfkspfx Afwoa - Year of manufacture: 2001 - Control unit: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. workpiece weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull studs seen in the photos are not included in the offer. Transport and loading can be organized Europe-wide upon request for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2011, Premer reza 260 mm Dolžina žaginega traku 3340 x 27 x 0,9 mm Območje reza pri 90 stopinjah: kvadrat 260 mm Območje reza pri 90 stopinjah: ploščat 380 x 260 mm Hitrost traku 37 / 74 m/min Moč motorja žage 1,5 kW Teža stroja pribl. 0,62 t Prostorske zahteve pribl. 1,7 x 1,4 x 1,3 m Poševna tračna žaga - Polavtomatska Gusdpfxswkvq Hs Afwea - Dvojni poševni rez - Zaznavanje materiala pri spuščanju - Vključuje 7 žaginih trakov

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 32.518 h, stiskalna sila: 250 t, vrsta upravljanja: CNC krmiljenje, Dolžina upogiba [mm]: 3550 Guodpfx Afsxcmwrewja Tlačna sila [t]: 250 Krmiljenje: Cybelec DNC 906 PS A Delovne ure [h]: 32518 - Hidravlično hitro vpenjanje za udarno in matrico - Hidravlična CNC bombirna enota - 2-osni CNC zadnji prislon (X in R) - 4 ročno pomične prislonske prste - 2 pomični pripomočki za upogibanje - Obsežen paket orodij na voljo opcijsko

Stanje: novo, Leto izdelave: 2026, Horizontal band saw with a swiveling arm for metal cutting, enables cutting in a plane perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. Material feeding can be performed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings, which significantly affects blade guidance, its durability, cut straightness, precision, and cut quality. The saw arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the drive wheel of the cutting blade via a worm gear motor. The blade is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. There is a separate coolant reservoir with an electric pump inside. The descent speed of the arm (cutting speed) is adjusted with a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are selectable: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the blade drive is automatically switched off. Safety is ensured by the blade covers and microswitches that stop the motor after the cutting cycle or upon opening any of the covers; additional protection is provided by the automatic shutoff of the bandsaw in the event of blade breakage. Technical specifications Band saw blade dimensions 2455×27×0.9 mm Blade tensioning mechanical (manual) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400 V Guedpfx Asvuf S Nefwsa Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE declaration yes Miter angles 0º ø230 mm 260×150 mm 225×225 mm 45º ø165 mm 180×130 mm 165×165 mm 60º ø105 mm 100×90 mm 110×110 mm *Please note: the device is supplied by default without a CEE connector, as there are many different types. If you would like to receive a connector along with the machine, please contact the seller before purchasing or during the ordering process.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Set für robotergestütztes Plasmaschweißen. Der Versand in EU-Länder erfolgt durch uns und ist kostenfrei. Gsdpfx Aerfuc Hofweua