Tračna žaga - vodoravna

JAESPA 250 GTH

Stanje: novo, konfiguracija osi: 3 osi, prva registracija: 03/2023, dolžina tovornega prostora: 16.160 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.770 mm, skupna dolžina: 16.160 mm, skupna širina: 2.550 mm, skupna višina: 3.750 mm, vzmetenje: zrak, velikost pnevmatike: 245 / 70 R17.5, medosna razdalja: 1.410 mm, barva: rdeča, Leto izdelave: 2022, Oprema: dvižna zadnja plošča, Colour: Red Payload Capacity: 55,200 kg Loading Platform Height: 89 cm Extendable Manufacturer: Goldhofer Type: STN-L 4 (245) A RM2 - Stepstar VIN: WG0STNL49N0042599 Year of Manufacture: 2022 – New/Unused Weights: • King-pin load: 18,500 kg • Axle load: 12,000 kg • Total axle load: 48,000 kg • Gross Vehicle Weight (GVW): 66,500 kg • Unladen weight: 11,300 kg • Payload capacity: 55,200 kg Dimensions: • Length: 13,020 mm • Extension: 3,140 mm • Max. extended length: 16,160 mm • Loading width: 2,550 mm / 3,000 mm • Loading height: 855 mm / 895 mm • +100 mm / -100 mm • Height: 3,755 mm • King-pin height: 1,300 mm Axles: • Axle brand: BPW Eco Plus • Air suspension • 1st axle liftable • 1st & 2nd axles fixed • 3rd & 4th axles friction-steered • High/Low valve • ABS • Tyres: 245/70 R17.5 twin-mounted • Load index 143/141J (146/146F) Additional Features: • Remote-controlled loading ramps • Hydraulically operated loading ramps • Mechanical rear supports • Side extensions • Underrun protection • Wheel wells • Wheel well covers • 2.0'' king pin • Lashing rings • Stake pockets • Central lubrication • Marker boards for oversize transport • BPW landing gear • Toolboxes on gooseneck = Additional Information = Axle Configuration Tyre size: 245/70 R17.5 Axle make: BPW Eco Plus Suspension: Air suspension Front axle 1: Twin tyres; lift axle; max. axle load: 12,000 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Front axle 2: Twin tyres; max. axle load: 12,000 kg; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 1: Twin tyres; max. axle load: 12,000 kg; steerable; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Rear axle 2: Twin tyres; max. axle load: 12,000 kg; steerable; Tyre tread left inside: 100%; Tyre tread left outside: 100%; Tyre tread right inside: 100%; Tyre tread right outside: 100% Weights Unladen weight: 11,300 kg Payload: 55,200 kg GVW: 66,500 kg Functionality Tailgate: Goldhofer Extendable body: Yes Condition General condition: very good Nwsdpeuu Hgdofx Adyjb Technical condition: very good Visual condition: very good Damage: none Financial information Price: On request Further information Please contact Stefan Schaapveld for more details.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Piła taśmowa do metalu o optymalnym zakresie cięcia, powszechnie stosowana w zakładach stolarskich, produkcyjnych oraz rzemieślniczych. Opis maszyny CORMAK BS 128HDRC to piła taśmowa do metalu o optymalnym zakresie cięcia, przeznaczona dla profesjonalistów, wyróżniająca się wydajnością i łatwością obsługi. Obracane ramię w obu kierunkach to istotna zaleta podczas cięcia pod kątem. Mimo niewielkich gabarytów, duża masa własna (103 kg) zapewnia stabilność i brak drgań podczas cięcia większych elementów. Cięty element może być podawany ręcznie lub przez podajnik. Posuw grawitacyjny z przepływem oleju w dwukomorowym siłowniku hydraulicznym. Sterowanie opuszczaniem ramienia odbywa się przez zawór regulujący przepływ oleju między komorami siłownika. Za precyzyjne prowadzenie taśmy odpowiada zestaw łożysk prowadzących. Maszyny wyposażone są w wyłącznik krańcowy i wyłącznik główny zgodne z IP54. Przegubowe ramię piły umożliwia cięcie dwustronne w zakresie -45° do +60°. Dane techniczne: Wymiary taśmy tnącej: 1640×13×0,65 mm Prędkość cięcia: 23/34/54 m/min Moc: 0,55 kW/400V Sterowanie opuszczaniem ramienia: płynne, siłownik hydrauliczny Zakres cięcia: -45° – +60° Wymiary: 942×442×548 mm Waga: 103 kg Maksymalny zakres cięcia [mm]: Kąt 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Wyposażenie standardowe: - Siłownik hydrauliczny 3. generacji Nsdpfx Adswq A Dyjyowb - Stół do cięć pionowych - Szybkomocujący imadło - System chłodzenia time ogranicznik materiału time wyłączniki krańcowe automatyczne time zabezpieczenie termiczne silnika time mobilna podstawa na czterech kołach time instrukcja obsługi Cena podana jest ceną netto. Do ceny nie doliczono kosztów wysyłki. Po więcej informacji zapraszamy do kontaktu telefonicznego lub mailowego. Szczegóły i pełna oferta dostępne na naszej stronie internetowej.

Stanje: novo, Machine in stock and immediately available Double mitre metal band saw S 255 DG Nwedpfxed R Sipj Adysb Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power rating S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made from stainless steel, steel, etc., for commercial use - Rugged, generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic downfeed cylinder - Quick-action vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimum cutting results - CE/IEC compliant, with German documentation and German after-sales service Scope of delivery: - Saw blade - Material stop - Manometer (blade tension) - Carbide blade guides - Vice with quick release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic end cut-off - Base frame

Stanje: novo, Cutting capacity: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow swivels up to 45° - Two saw band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid material made of stainless steel (VA), iron, etc. - Generously dimensioned saw arm for low-vibration operation - Lowering of the saw arm via hydraulic lowering cylinder - Low-noise due to stable construction - Automatic shut-off after cutting via micro end switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable saw band guides for optimal cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: Nwedpfoilk H Tox Adyob - Bi-metal saw blade 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic end shut-off after cutting - Base frame

Stanje: novo, Leto izdelave: 2023, Cutting diameter: 1100 mm Bandsaw blade length: 11,000 x 67 mm Cutting width: 1.6 mm Cutting range at 90 degrees (square): 1100 x 1100 mm Cutting range at 90 degrees (flat): 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space required: approx. 2,800 x 1,700 x 5,200 mm Nsdpfx Ajtq Dw Eodyowb The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor spiral. A chip bin approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. On the outfeed side, there is a roller table measuring 1.40 x 1.00 meters. On the infeed side, there is a motorized roller table measuring 2 x 1.40 meters. Optional specifications: - Motorized system for roller table - Laser line - Extra double roller table - PLC display - Anti-vibration system The images are for reference only and do not represent a true-to-scale depiction of the machine.

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Nedpfx Adjfibd Teyowb Vice jaw height: 200 mm Vice jaw length: 185 mm Working table height: 760 mm Machine weight: 820 kg

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Nedofg E Hljpfx Adyjwb Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Nwjdpotrd T Tefx Adyeb Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Njdpfjm Ew Stjx Adyewb Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm - Electrically tiltable Nedpfx Aegg Rb Todyewb - Foot pedal - Documentation - 230V