Manipulator za varjenje

TTMC WP500

Stanje: novo, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table dimensions: 550 mm - Electrically tiltable Hjdpfswin I Iox Af Tsfb - Foot pedal - Emergency stop - Documentation - 230V

Stanje: novo, Leto izdelave: 2025, Delovno območje: 6100 mm × 1524 mm / 4000 mm × 1524 mm / 3048 mm × 1524 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja: ±0,05 mm Ponovna natančnost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 91 m/min Maksimalno pospeševanje: 1G 1. Raztegnjen aluminijast nosilec Letalsko-kakovosten material z izboljšano togostjo bistveno zmanjšuje deformacije nosilca pri visokih hitrostih ter povečuje občutljivost in učinkovitost obdelave pri visokih hitrostih. 2. Posteljna konstrukcija z ugreznjenimi spojkami (Tenon-and-mortise) Uporablja tradicionalno kitajsko spojno tehniko "tenon and mortise" za večjo nosilnost. Priključne točke za varjenje in nosilna konstrukcija zagotavljajo dolgoletno stabilnost delovanja. Varjena konstrukcija prispeva k boljši absorpciji vibracij, zmanjša odklone ob tresljajih ter omogoča natančnejše rezanje. 3. Dvojni avtomatski centrirni električni vpenjalniki Dvojna električna vpenjalnika z avtomatsko centrirno funkcijo sta enostavna za uporabo in zahtevata minimalno vzdrževanje. Nov motor omogoča natančen nadzor. Modularne komponente vpenjalnika so samostojno razvite ter jih je mogoče hitro zamenjati. 4. Avtomatska funkcija ostrenja laserske glave Z nastavitvijo perforacijske in rezalne žariščne razdalje posebej je rezanje natančnejše. Primerna za različne žariščne razdalje – položaj žarišča se samodejno prilagodi glede na debelino posameznih pločevin. 5. Funkcija alarma pri nizkem tlaku plina Hodpfxjg Eglps Af Tefb Sproten nadzor tlaka plina in javljanje nepravilnosti zagotavljata kakovost in natančnost reza ter pravočasno opozorita upravljavca na potrebo po zamenjavi plina.

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner Hfjdpfjg Tdpgex Af Tjb with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Hjdpfsfg E Hpsx Af Tsfb Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) Hsdpfxjfg E Hlj Af Tofb • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Leto izdelave: 2023, Cutting diameter: 1100 mm Bandsaw blade length: 11,000 x 67 mm Cutting width: 1.6 mm Cutting range at 90 degrees (square): 1100 x 1100 mm Cutting range at 90 degrees (flat): 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Machine weight: approx. 8,700 kg Space required: approx. 2,800 x 1,700 x 5,200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor spiral. A chip bin approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. On the outfeed side, there is a roller table measuring 1.40 x 1.00 meters. On the infeed side, there is a motorized roller table measuring 2 x 1.40 meters. Optional specifications: - Motorized system for roller table - Laser line - Extra double roller table - PLC display - Anti-vibration system The images are for reference only and do not represent a true-to-scale depiction of the machine. Hfjdpfxetq Dw Ee Af Tjb

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), Complete set incl. hand and dual foot remote control Hjdpfom Ew Stox Af Tsfb Digital speed display Hydraulic height adjustment Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range from 0.01 to approx. 0.7 rpm.

Stanje: novo, Semi-automatic band saw for cutting solid bars and medium-sized profiles, delivering high performance and excellent cutting accuracy. The sturdy frame provides the machine with the necessary rigidity and precision for the cutting assembly. The band is driven by a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm screw. Properly sized flywheels. Robust blade guides made with sealed roller bearings and adjustable carbide (widia) plates. Blade tensioning achieved by an electromechanical device with micro-switch control for blade rotation. Safety devices on the flywheel cover and blade to prevent accidents. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repetitive cuts. Band cleaning brush device. Hydraulic power pack motor: 0.37 kW Electropump: 0.09 kW for blade cooling. Vice jaw height: 200 mm Vice jaw length: 185 mm Hfedpfx Afsfibd To Tjb Working table height: 760 mm Machine weight: 820 kg

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Hfsdpfx Afemk Ikte Tjb Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch

Stanje: novo, Welding positioners (turntables) increase work flexibility, productivity, and quality. Turntables also assist the welder during operations, ensuring a safe working environment and improved ergonomics. The main advantage of PEMA positioners is that workpieces can always be set to the optimal welding position. This can increase welding productivity by up to 70%. Hfedpfx Ajg Urz Hef Tjb 50 years of productive, high-quality welding – for half a century, we have been designing and manufacturing welding positioners for demanding and heavy workpieces. Pemamek welding positioners combine modern design with reliable, efficient technology and can be seamlessly integrated into any other PEMA solution. Each of our welding positioners is designed in-house and manufactured using high-quality components. We are the official PEMA representative for Southern Germany. We still have several APS older generation positioners in stock. The new APSI generation is already available from stock.