Stroj za vrtanje in rezkanje

IXION-MAXION KT 2-1300.1GL

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 185078, Offer 24435 Technical Data: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine, make: MAXION, type: BT 15 GL Bjdpfsur H Ehsx Afnewi - Drilling capacity up to: 18 mm - Tapping capacity up to: M 10 - Drill spindle mount: MK 2 - Drilling spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320 / 560 / 1000 / 1600 rpm - Motorized stroke of drilling unit - Table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Space requirement (approx.): W 1750 x H 1600 x D 1000 mm - Weight (approx.): 1200 kg - Various guiding sleeves

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Bsdpfx Asph Uk Nefnjwi Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, najv. debelina jeklene pločevine: 25 mm, moč: 6 kW (8,16 KM), Delovno območje 3000x1500. Sistem Loadmaster vključen. Zaradi daljše neuporabe je potreben servis. Bwodpjwh R R Nofx Afnoi

Stanje: rabljeno, CNC oxy-fuel cutting system BACH type ACW 2500 Oxy-fuel cutting machine with NBS 400 CNC control Machine no. 14 561-06 Year of manufacture: 2006 Cutting area: 2500 x 6500 mm Track length: 8000 mm Bjdpfef Ncadjx Afnswi Gauge width: 3345 mm Track height: 650 mm 2x machine cutting torches with cutting table

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Bwedpfxjfxyhfo Afnoi Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set Bsdpjwuurwefx Afnjwi - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Bsdpswxz D Uofx Afnowi Težka konstrukcija ogrodja Vzdolžno pomikanje X-os: 1800 mm Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, A DMG Mori CNC vertical machining center including Lang pallet handling system is available. 1) DMG Mori, year of manufacture: 2014, travel ranges X/Y/Z: 650mm/520mm/475mm, rapid traverse: 36m/min, spindle speed: 14,000rpm, spindle power: 24kW/16kW, tool holder: HSK-A63, tool stations: 30, table dimensions X/Y: 900mm/570mm, machine dimensions X/Y/Z: approx. 3900mm/3400mm/2600mm, weight: approx. 6250kg, control: Heidenhain TNC 640, operating hours: 28,250h, spindle hours: 13,116h. 2) Lang Eco Compact 20 pallet automation system, year of manufacture: 2018, pallet capacity: 20, loading arm reach: 1200mm, footprint X/Y: 2000mm/2000mm. The turntable at the doors is defective. Documentation is available. On-site inspection is possible. Bodpfx Afjwpk Anonewi

Leto izdelave: 2023, stanje: novo, SONDA ist eine kostengünstige Lösung zur Nachrüstung einer Ultraschall-Reinigungseinheit. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschallwascheinheit verwandeln möchten, ist die SONDA die ideale Wahl. Wir fertigen SONDA-Eintaucheinheiten unabhängig von den Abmessungen Ihres Tanks. Sie müssen uns lediglich die Maße Ihres Tanks mitteilen und das Gerät mit wenigen Handgriffen montieren. Funktionsprinzip -Jede einzelne, tauchfähige SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. -Die tauchfähigen SONDA-Module sind montagefertig für die Tankwand vorbereitet. Bsdpfx Afsd I E Ivenswi -Ideal geeignet zur Nachrüstung großer Behälter, z.B. für Beschichtungs- und Oberflächenbehandlungsprozesse. Tauchschwinger, Ultraschallreiniger, Wandler, Ultraschall Gerne senden wir Ihnen auf Anfrage die technischen Spezifikationen zu.

Stanje: novo, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. Integrated synergic functions facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to guarantee perfect quality. Bwodpomxkdpofx Afnsi MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (reverse polarity): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.