Pralni obrat

ITF Wave 450

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.450 mm, skupna širina: 800 mm, skupna višina: 1.800 mm, skupna masa: 500 kg, moč: 4,75 kW (6,46 KM), FC 120 ZK Working capacity: Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush belt dimensions: 120xØ200 mm, Itedpfxst D D Nze Af Tob Abrasive belt speed: 20 m/s, Brush belt speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Feed motor: 0.25 kW, Total power: 4.75 kW, Current consumption: 12A, Dust extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Stanje: novo, Leto izdelave: 2026, Recirculation chamber furnace, electric, new unit, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac (controller/recorder with color touch display) - 2 circulating air fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity: approx. 70 kW - Temperature accuracy: +/- 6 K in empty furnace - Documentation, CE declaration of conformity - Electrical wiring diagram with spare parts list Note: The furnace floor is not insulated, but only covered with stainless steel sheet, allowing unobstructed access with any track gauge. Optionally, the floor can be supplied insulated (with entry rails to be defined by the customer). Ijdpfxev Hg Eus Af Tjtb We offer new and used industrial furnaces, which we can also retrofit and customize according to customer requirements. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heat cabinet, recirculation oven, chamber oven, preheating oven, chamber recirculation oven, tempering oven, annealing oven.

Leto izdelave: 2023, Stanje: pripravljen za uporabo (rabljen), A nearly new, alcohol-based automatic cleaning system by Höckh is available. Basket dimensions (X/Y/Z): 530mm / 320mm / 200mm. Maximum batch weight: 60kg. Throughput: 4–8 batches per hour. Number of tanks: 2. Machine dimensions (X/Y): 1250mm / 1900mm. Cleaning methods: spray and immersion processes. Documentation is available. An on-site inspection is possible. Iodpfx Afovuafds Totb

Stanje: novo, Industrial Belt Grinder Scantool 150 x 2000 with integrated dual extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 HP Belt speed: 34 m/sec Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Surface grinding area: 530 mm Weight: 115 kg The Scantool industrial belt grinder models with dual extraction (75 x 2000 and 150 x 2000) are high-performance, quality machines built to the strictest environmental and safety standards. All belt grinders are equipped as standard with a motor brake, adjustable working height, eye protection, miter gauge, and motor protection switch with no-voltage release. The low-noise, CE-certified machine is ideal for grinding all types of metals. Motor protection switch with no-voltage release Separate emergency stop Motor brake Adjustable miter gauge Eye protection The steplessly adjustable working height enables an ergonomically correct working position Itjdpoflt Aljfx Af Tob Perfect design for fast, effective, and safe grinding Self-adjusting belt tension Top-quality Danish manufacture

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, vrsta vhodnega toka: Klimatska naprava, Electrically heated roller sintering furnace, Manufacturer: Riedhammer Model: TR 18/4x33/10-E 90 Condition: As new Length of debinding zone: 6.12 m Length of heating/soaking zone: 6.12 m Length of cooling zone: 6.12 m Itjdjp T Th Hepfx Af Tsb Overall furnace length without handling equipment: approx. 18.4 m Overall furnace length with infeed/outfeed: 20.4 m Overall furnace width: 3.5 m Overall furnace height: approx. 2.5 m Clear furnace width: 1,540 mm Usable width: 4x 330 mm Usable height from top of roller: 100 mm Roller pitch: approx. 85 mm Roller diameter: approx. 50 mm Number of furnace conveyor drives (regulated): 3 units Number of control zones: 34 Connected load (furnace): approx. 476 kW Maximum temperature at thermocouple: 900 °C Max. temperature: 930 °C Supply voltage: 400/230V, 50Hz Cooling water consumption: approx. 50 m³/h

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, priključek za stisnjen zrak: 6 letvica, obratovalni tlak: 6 letvica, trajanje garancije: 12 meseci, skupna masa: 8.000 kg, notranja višina: 600 mm, teža obdelovanca (maks.): 20 kg, premer vrtljive mize: 400 mm, Die beschriebene Strahlanlage ist für das automatische Strahlen oder Kugelstrahlen mit ausgewählten Strahlmitteln ausgelegt, je nach gewünschtem Endergebnis der Oberflächenbehandlung. Zu bearbeitende Werkstücke werden auf geeigneten Werkstückhaltern positioniert, die das Abschatten der Kontaktflächen von Bauteilen bzw. Vorrichtungen minimieren. Das Be- und Entladen der Teile erfolgt im automatischen Zyklus durch einen Schrittförderer, der auch im Dauerbetrieb arbeiten kann, in die Strahl-/Kugelstrahlzonen. Nach dem Durchlaufen einer Neutralzone werden die Teile in den folgenden Zonen gestrahlt bzw. kugelgestrahlt; vor dem Entladen werden die Teile zusätzlich abgeblasen. Das System ist mit einer (1) Be- und Entladestation ausgestattet, um das Be- und Entladen während des Prozesszyklus zu erleichtern. Sobald das Werkstück durch einen Bediener oder automatisiert geladen wurde, startet der Zyklus, und der Förderer fährt einen Schritt weiter. Dadurch gelangt das neu beladene Werkstück in die Kabine, während gleichzeitig ein bereits behandeltes Teil an der Entladestation ankommt. Ijdpfx Aewdgrzof Totb Die Maschine arbeitet mit Taktzeiten, wobei im Vollbetrieb alle Positionen der Satelliten auf dem Förderer während der Zykluszeit belegt sind. In den inneren Positionen der Kabine rotieren die Satelliten, während die Strahldüsen das Strahl-/Kugelstrahlmittel mit dem jeweils optimalen Aufprallwinkel gemäß Konstruktionsvorgabe auf das Werkstück bringen.

Stanje: pripravljen za uporabo (rabljen), Mahr MarSurf M 400 SD26 Surface Roughness Measuring Instrument Manufacturer: MAHR Model: MarSurf M 400 Probe System: Free probe system Roughness Measuring Range: +/- 250 µm, +/- 750 µm Minimum Traversing Length: 1.75 mm Maximum Traversing Length: 17.5 mm Cut-off Wavelength: 0.25 mm, 0.8 mm, 2.5 mm Profile Measurement Memory (Number of Individual Values): 40,000 pcs Profile Measurement Memory (Number of Profiles): 30 pcs Original price: €11,190 net - Bluetooth connection between traverse unit and display unit. Itsdevr S Rmepfx Af Tsb - Measurements can be taken in any direction: horizontal, vertical, or overhead. You are welcome to arrange a viewing appointment. We are also happy to organize affordable shipping for you! You will receive an official invoice. For international customers, a net invoice can be issued if a valid VAT ID is provided. Subject to prior sale. Visit our shop and browse our other listings as well. The specified company names and trademarks are property of their respective owners and are used for identification and product description purposes only. Deviations from technical data and errors in the description of the item may occur and are reserved.

Stanje: dober (rabljeno), Leto izdelave: 2005, This is a programmable sandblasting machine with a working area of 100x100 mm, including documentation and operating instructions. The machine dimensions are: Iodpfx Asv Rcycsf Tstb W x D x H – 1300 x 700 x 1750 mm.

Stanje: rabljeno, Naprodaj je rabljena kriogena peskalna naprava za odstranjevanje srha iz gumenih in plastičnih komponent. Programabilni računalnik 10″ barvni monitor Električni pogon Sistem za branje črtnih kod Za odstranjevanje srha z: Kompleksnih medicinskih gumijastih delov Mikroelektronskih komponent Preciznih delov iz elastomera Podobno kot MEWO TS 7.12 Isdpfjvirxfjx Af Tstb