Vrtalno-rezkalni stroj INNSE INNOCENT PM250

INNSE INNOCENTI PM 250

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Track gauge approx. 20.0 m Dsdpjqfc Egsfx Aplout Lifting height approx. 8.0 m Manufacturer/Overhaul: HILGERS/TEICHMANN Conversion/Overhaul: 2000/2023 Crane equipped with: - Two-rail trolley with 4-corner rope lead-out - Magnetic system pre-installed - Radio remote control - Optional with magnet beam or spreader

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Duedpfxedvn E Us Apljt Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Dimensions with horizontal table: 1,200 mm to 1,900 mm

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Stroke / mm Dusdpfx Asuddcajplst Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections.

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Dedpfx Apot N Antolout Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 350 mm, 3-osni digitalni prikazovalnik Horizontalno in vertikalno rezkalno vreteno Pinola Tehnični podatki: Dolgobna posuv X / vzdolžno pomikanje X: 450 mm Prečna posuv Y / prečno pomikanje Y: 300 mm Navpična posuv Z / navpično pomikanje Z: 350 mm Velikost mize: 800x400 mm Dusdpfxowyit Hs Aplot Vpenjalni konus vretena: SK40 Območje obratov: 50-2500 min⁻¹ Območje pomika: 8-400 mm/min Pogonska moč: 3,2 kW Teža stroja: 1500 kg Tehnični podatki, pribor in opis stroja niso zavezujoči.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Hydraulic synchronized press brake MECOS Mod. Syncro 200/4000. CNC Control ESA KVARA. No. 07 controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) Automatic WILA crowning system. Dedpfx Ajv S Ad Ropleut Pneumatic tool clamping: Promecam type, Tecnostamp H=150 mm. Useful bending length: 4050 mm. Pressing force: 200 tons. Front safety devices: DSP LASER. Weight: 24,000 kg.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Pressing force: 320 t (also available in various other configurations!) Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Dedpfsuf Nr Ajx Apljut Throat depth: 450 mm Clear gap between uprights: 2555 mm Machine length: 3785 mm Machine width: 2290 mm Width without support arms: 1740 mm Total height: 3100 mm Table height: 920 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 14450 kg (Data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double guided press beam, robust and precise - Robust backgauge, double guided - Double-guided backgauge fingers on linear rails - Movable front supports with height adjustment - Side and rear safety guards - Lower die adapter rail 60mm - Manual upper tool clamping system (Promecam system) - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Additional equipment: - Delem DA 66t CNC control - CNC controlled R-axis backgauge - CNC controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (total 4) - 1 set of upper and lower tools - Other bending lengths and capacities available with appropriate accessories! -

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Duedpfx Ajtrvzxopljt Machine weight: 4,000 kg

Stanje: rabljeno, Tischgröße unten: 1120 x 1250 mm Djdpfx Ape Dv Nxoljut Technische Merkmale: * Hub auf/ab: 1000 mm * Hub vor/zurück: 1200 mm * Hub links/rechts: 1000 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 18.000 kg, dvižna višina: 4.000 mm, prosto dvigovanje: 2.000 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.695 mm, moč: 168 kW (228,42 KM), širina nosilnega okvirja vilic: 2.500 mm, dolžina vilic: 2.400 mm, vrsta pogona: Diesel, Heavy-duty forklift – diesel Load center: 600 mm Fork width: 200 mm Fork thickness: 100 mm Mast type: Duplex Transmission: ZF 3WG171 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: 12.00 x 20 Rear tire type: Pneumatic Rear tire size: 12.00 x 20 Description: Sideshifter, fork positioner, KALMAR SV/GV fork carriage with central level compensation, width B = 2,500 mm Terminal-West quick-change system for SV/GV fork carriage Additional hydraulic function incl. hoses Kalmar EGO comfort cab Air conditioning system ECC with fresh air filter, tinted windows, and air-suspended, leather-reinforced Grammer Actimo XL driver’s seat Radio with DAB+/CD/RDS/MP3/USB/AUX/Bluetooth/hands-free/streaming 12/24V voltage converter incl. 2 x 12V and 2 x 24V sockets Duedpfx Apsuahtbslet Load weight display on monitor Direction selector on lift hydraulic lever Engine pre-heater 220 V Hydraulic accumulator for lift hydraulics Hydraulic oil cooler with fan Mast tilt: 14° forward, 10° backward Height-adjustable LED beacon Kalmar blade forks, fork length l = 2,400 x 200 x 100 mm Elevated air intake for air filter with pre-separator Mud flaps on drive axle and steering axle Anti-slip coating on front fenders and tank 2 extra LED work lights in mast below standard headlights 2 extra LED work lights on front cab corners, forward-facing 6 extra LED work lights on rear cab corners with protective guard Blue Spot warning lights front and rear Automatic central lubrication system on steering axle and fork carriage Sensor-controlled Forrex fire suppression system – automatic and manual activation 6 kg (powder) fire extinguisher, EN3 Rear-view camera mounted on cab roof with color monitor inside cab Mast camera linked to cab monitor (with rear-view camera) Tire pressure monitoring