INGERSOLL GANTRY 800

INGERSOLL GANTRY 800

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Gjdpfx Aoyr I Aijgyobi Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 Gbsdpfjyrqprex Agyoi EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Stanje: rabljeno, Leto izdelave: 1999, Table length 850 mm Table width 550 mm Godpfx Agsu Dbtljyebi Amperage 70 A Control CNC MITSUBISHI 32bit Travels (X, Y, Z) 550 / 850 / 450 mm Machine weight approx. 6 t Space requirements approx. 2.4 x 2.65 x 2.68 m Electrical Discharge Machine (EDM) / Die-Sinking EDM The machine is in very good condition. Equipment / Accessories: - Y-axis travel during electrode change and loading position: 1180 mm - Integrated C-axis, work head with adjustable speed: 10/20 rpm - Integrated C-axis / work head measuring resolution: 0.001 mm - Load capacity without changer: 50 kg - Load capacity with changer: 10 kg - Maximum head load: 200 kg - Maximum distance between tool carrier plate and work table: 585 mm - Minimum distance between tool carrier plate and work table: 125 mm - Work tank: - Lift tank dimensions (W x D x H): 800 x 1100 x 480 mm - Programmable/automatic dielectric fluid height: 440 mm - Filter cartridge type: Cartridges integrated - Electrode changing system / pick-up disc magazine slots: 20 - Electrode weight / single electrode: 15 kg - Changer total capacity: 60 kg - Generator FP 70 amp, multipulse - Electrode changer: 20-position pick-up linear changer - Electric hand pendant - Integrated CO₂ fire extinguishing system / dielectric cartridge filter system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Completely Refurbished OPS Ingersoll Gantry 800 Eagle Die-Sinking EDM Machine – Technically and Visually in Excellent Condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and optical condition. During the overhaul, more than 70% of the machine was disassembled. All relevant wear parts, including ball bearings and drive spindles, were carefully inspected and replaced as needed. A complete geometric measurement, alignment, and additional inspection using a laser measuring system were subsequently performed. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic lines, were completely replaced. Additionally, the machine received a complete new paint job and is visually in very well-maintained condition. The generator and control system were cleaned and technically inspected. The generator's climate unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and inspection standards. The machine is immediately ready for operation and ideally suited for reliable production use. Technical data: - Ingersoll (OPS Ingersoll) - Die-sinking EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC Gbsdeykn Ngopfx Agyei - Powertec Easy Burn quick programming - Powertec Handheld – multifunctional handheld controller - Manual EDM operation with Powertec Handheld - High Speed Jump: max. 18 m/min - Generator output: 60 ampere, EAGLE Powertec - Travel distances (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up disk changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Worktable (W x D): 760 x 1000 mm - Table load capacity: 2,000 kg Accessories: - CO2 fire extinguishing system - Integrated cartridge filter system Special equipment: - Linear measuring system on all axes (Z standard for the series)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, teža obdelovanca (maks.): 2.000 kg, širina mize: 760 mm, tabela razdalje do vretena: 585 mm, dolžina mize: 1.000 mm, dolžina obdelovanca (maks.): 1.095 mm, širina obdelovanca (maks.): 795 mm, višina obdelovanca (maks.): 480 mm, skupna masa: 6.800 kg, leto zadnje generalne obnove: 2025, obremenitev mize: 2.000 kg, hitri pomik na osi Z: 18 m/min, Oprema: dokumentacija / priročnik, OPS INGERSOLL GANTRY EAGLE 800 Refurbished Year of manufacture: 2013 EAGLE Powertec PC/NC control 3060 22" touchscreen monitor MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld multifunctional manual control device Manual EDM processing with Powertec Handheld EAGLE Powertec fine finishing generator PT 60, 60 amps Gbodpfx Aeyi Uaijgysi High Speed Jump max. 18,000 mm/min. Travel paths (X, Y, Z): 550 x 850 x 450 mm Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Worktable (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Head load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system Electrode clamping system EROWA ITS, Hirschmann, or System 3R (customer choice) ECOTEC energy-saving function standby mode for Gantry Eagle Multiprog Powertec technology programming on CD for external programming station

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 575415, Teža: 6.700 kg, različna periferija, upravljanje, 1 manipulacijski sistem OPS INGERSOLL IMC 5, leto izdelave: 2008, serijska št.: 583080, teža: 1.800 kg, 1 hladilna enota M.T.A. TAE EVO M10, leto izdelave: 2012, 1 protipožarni sistem KRAFT & BAUER FB 703. Gbsdpfjyidk Ijx Agysi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, ops ingersoll gantry eagle 800 leto izdelave: 2011 ure: 1703 krmiljenje eagle powertec osi x, y, z: 550 x 850 x 450 mm pritrdilna plošča: 760 x 1000 mm maks. teža: 2000 kg erowa vpenjanje potopna delovna kad os c Gedpexiwz Usfx Agyebi hladilnik protipožarna naprava daljinsko upravljanje menjalec elektrod za 20 kosov generator 60 amp vklj. dielektrik (+/- 700 litrov) vklj. tipalo vklj. tipalo na postelji vklj. magnet 400 x 200 mm vklj. omara s pripomočki dokumentacija stroj je pod napetostjo za pregled

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 80.000 h, številka stroja/vozila: 571718,

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 575259, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideally suited for precise EDM applications in tool and mould making, and comes with a comprehensive range of equipment. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained and fully operational ⚙️ Technical Specifications: Travel range (X/Y/Z): 550 x 850 x 450 mm Table size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clear width: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Gbjdpow Ig A Hjfx Agyoi Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filtration unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables included ⚡ Electrical Data (as per nameplate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fuse protection: 25 A Circuit diagram no.: 107258 Errors, typographical mistakes and prior sale excepted.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 575650, potovalna razdalja osi X: 550 mm, pomik osi Y: 850 mm, pomik po osi Z: 450 mm, TECHNICAL DETAILS Design: Lifting tank Internal dimensions (W x D x H): 800 x 1100 x 480 mm Gjdpfx Agow T Thmoysbi Dielectric fluid height programmable/automatic: max. 450 mm WORKING HEAD At ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to work table: 135 mm Max. distance electrode clamping system to work table: 585 mm INTEGRATED C-AXIS Rotational speed adjustable: 1 - 20 rpm Measuring resolution: 0.001 degrees Load capacity with manual electrode change: 50 kg Load capacity with automatic electrode change: 15 kg Holding torque/clamping force: 120 Nm Max. moment of inertia of electrode: 0.4 kgm² WORK TABLE Support surface (W x D): 760 x 1000 mm Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (within work tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5,000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) with generator: 2760 x 2730 x 2940 mm Space requirement with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h