CNC večvretenska avtomatska stružnica

INDEX MS 18

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Gbsdpfxow Intaj Anfel Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machinable length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12 mm - Travel distance Z: 120 mm - Spindle speed: 7,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOL POST Godpeuhaw Iefx Anfebl - Number of positions: 3 BACK MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Installation space required: 1500 x 770 mm - Machine weight: 1,400 kg ACCESSORIES - Control: Fanuc - 3-color status light - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Electrical transformer

Leto izdelave: 1986, stanje: dober (rabljeno), Technische Daten: Produkte – - Flachstahl: 10x3 – 25x3 mm, 10x4 – 25x4 mm, 12x5 – 20x5 mm Gsdpfx Anod H Ur Aofobl - Vierkantstahl: 6x6 – 12x12 mm - T-Profil: 20x10x3 mm - L-Profil: 15x15x3 – 18x18x3 mm Rohmaterial Draht: 8, 9, 10, 11, 12, 13, 14, 16 mm Transformatorleistung: 20 kW Geschwindigkeit: 35 m/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. Gsdpfx Aneyyuvtefsbl • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, Leto izdelave: 2014, INDEX C200 CNC stružnica 3 revolverske glave 2 vretena Fanuc krmilnik: 31i-Model B Motorna aksialna stikala: 6 kos Motorna radialna stikala: 13 kos Nosilci orodij: 11 kos Nosilci vrtalnih palic: 21 kos Zatič: 1 kos Vložki za polnjenje + tulke: Ø51/Ø46/Ø41 Nove MBL vložke za polnjenje: 2 kompleta 2 optični merili obnovljeni pri HEIDENHAIN 1 Balluff škatla z robotskimi rokami z različnimi senzorji, bližinskimi stikali in kabli Motorizirani jermeni: 6 kos Set antivibracijskih vložkov za MBL polnilnike Čas obratovanja: Gjdpexxm Hfofx Anfsbl Čas vklopa: 37.946 Hidravlične ure: 37.500 Proizvodni čas: 26.500 Z MBL podajalnikom palic

Stanje: rabljeno, Leto izdelave: 2017, Technical specifications: Gbodpfx Ajttxg Ssnfsl Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Required space approx.: 4.7 x 3.65 x 3.0 m

Stanje: novo, Leto izdelave: 2025, največja hitrost vretena: 8.000 obr/min, hitrost vretena (min.): 8.000 obr/min, 1 Mehrspindel-Drehautomat TORNOS SAS16-DC im Wiederaufbau - neuer Schaltschrank SIEMENS oder FANUC, wählbar – Abholtisch mit Bremse – verstellbarer Anschlag mit Gegenbetrieb Gbsdpfx Ajugl S Ionfel – 3 unabhängige Vorschubsysteme – mehrere Werkzeughalter und Bohrvorrichtungen – Trommelstangenführung mit Unterstützung – Optionen: automatischer Stangenlader IEMCA PRA, numerisches Gewindeschneiden, CNC-Querschlitten, etc. Kontaktieren Sie uns.

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Maks. višina obdelovanca: 150 mm Gbjdjqvd Iujpfx Anfel Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm C-os: 360° Krmiljenje: FANUC Vertikalni stružni stroj | EMAG - VL2 Opremljen s trakom za transport obdelovancev. Stroj je v zelo dobrem stanju. Upoštevajte, da so tehnični podatki prevzeti iz primerljivih strojev.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 8,000 rpm TOOL HOLDER 1 - Number of stations: 9 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm FRONT UNIT - Number of stations: 3 BACKWORKING - Number of stations: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 73,252 h - Spindle hours: 50,900 h ACCESSORIES - Control: Fanuc 18iT - Driven guide bush - Parts catcher - Parts conveyor belt Godpfx Aju Elkqjnfebl - Parts ejector - Coolant tank - Bar feeder: IEMCA CH 220/32L - Fire extinguishing system * NB: Functionality not guaranteed. Should be checked by a qualified company appointed by the buyer. - Electrical transformer - Number of driven tool holders: 3

Leto izdelave: 1978, stanje: zelo dobro (rabljeno), Tehnične podrobnosti: - Proizvajalec: DRAWEBA - Model: DDANS 17 l Gedpfx Anolf Iqnsfjbl - Leto izdelave: 1978 - Premer žice: 1,4 - 1,6 mm - Velikost odprtine mreže: najmanj 10 x 10 mm - Širina mreže: 1600 mm