Indeks Večvretenska CNC stružnica

INDEX MS 18-6

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Multispindle lathe Schütte AG20 Nwedpfx Aljhrihysioi

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MV0009-001573, potovalna razdalja osi X: 762 mm, pomik osi Y: 435 mm, pomik po osi Z: 510 mm, nazivna (navidezna) moč: 33 kVA, skupna masa: 5.000 kg, vrsta vhodnega toka: trifazni, Doosan DNM 400 – Vertikalni obdelovalni center. CNC rezkalni stroj za natančno obdelavo kovin. Primeren za vrtanje, rezkanje in rezanje navojev. Zanesljiv in natančen, idealen za industrijsko uporabo. Nedpfx Aoy Exg Helijwi

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 MILLING SPINDLE - Tool holder: HSK40 - Spindle speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid traverse speed (X/Y/Z): 75 m/min SWIVEL AXIS B - Travel range: -20/+90° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Umbrella type - Number of tools in magazine: 40 TURNING SPINDLE - Spindle speed: 8,000 rpm Nwsdpouhbr Tofx Aliei - Max. bar diameter: 32 mm - Minimum resolution C-axis: 0.001° - Travel range: 360° ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Floor space required: 1,500 x 2,600 mm - Machine height: 2,300 mm - Machine weight: 2,850 kg MACHINE HOURS ACCESSORIES - Control: Siemens 840 D - 3-color status light

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled Nwsdpeuhauysfx Aliji - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: dober (rabljeno), Podajalnik palic LNS Nsdpfx Aljr Iygisiewi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 800 kW (1.087,70 KM), skupna masa: 4.500 kg, Oprema: kompresor, zamrzovalnik, Chiller Trane RTUB224 Nedpferzq Arjx Alijwi Cooling capacity: 800 kW Number of refrigeration circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C and a condensing temperature of +40°C.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses Nwsdpfoyuzg Hox Alioi - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled Nwodpjuhatpefx Alisi - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - SIEMENS 840D CNC - Counter spindle - Polygon turning attachment: Slide unit 5.1 - Bar feeder: IEMCA SIR MS32/33 P - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit - Parts removal - Parts ejector - Fire protection system: KRAFT UND BAUER * NB: Functionality not guaranteed. Inspection by a qualified company of the buyer is recommended.

Leto izdelave: 2023, stanje: novo, ! Mašinos pasiūlymas klientams Lietuvoje, Latvijoje ir Estijoje. LVD PHOENIX lazeris yra skaidulinio lazerio pjovimo staklės, kurios išsiskiria dideliu dinamizmu ir lankstumu pjaunant storas medžiagas. PHOENIX modeliai siūlomi skirtingų dydžių: 3 m x 1,5 m, 4 m x 2 m ir 6 m x 2 m. Lazerio galingumas: nuo 4 kW iki 20 kW. Standartiškai staklės komplektuojamos su automatiniu keičiamu stalu, pjaustymo galva, adaptyvine kolimavimo sistema (iki 12 kW), talpine aukščio sekimo sistema, automatiniu antgalių valymu, automatinio lakšto atpažinimu, automatiniu pjovimo dujų pasirinkimu (deguonis, azotas, suslėgtas oras), aušintuvu ir dūmų ištraukimo sistema, SIEMENS valdymo bloku. PHOENIX lazerio pjovimo staklės suderinamos su plačiu automatizacijos sprendimų spektru: lakštų pakrovimo/iškrovimo, lakštų sandėliavimo iki 6 metrų, antgalių keitimo moduliais. Keičiamas stalas Visi PHOENIX lazeriai standartinėje komplektacijoje turi automatinius keičiamus stalus. Stalo aukštis – 930 mm. Stalo pakeitimo greitis priklauso nuo modelio dydžio: 3015 – 35 s, 4020 – 39 s, 6020 – 48 s. 4020 ir 6020 modelių stalai sudaryti iš 2 m x 1 m modulių, kurie lengvai keičiami ir aptarnaujami. Pjaustymo galva Njdpfx Asiy N Npolijwi PHOENIX lazerio pjovimo staklių lazerio galia: nuo 4 iki 20 kW (galimi: 4 kW, 6 kW, 10 kW, 12 kW, 20 kW). 4–12 kW galios lazeriams naudojamas 150 mm arba 200 mm fokusavimo objektyvas, o galingiems 20 kW lazeriams – 250 mm fokusavimo objektyvas. Rėmas PHOENIX 3015 modelis turi vientisą suvirintos plieninės konstrukcijos rėmą, užtikrinantį didelį greitį ir tikslumą. Dėl didelio rėmo standumo nereikalingi specialūs pamatai. PHOENIX 4020 ir 6020 modelių rėmai sudaryti iš keturių dalių: dvi standžios (kairė/dešinė) rėmo pusės sujungtos dviem prisukamomis sijomis.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), An old Schumag Aachen drawing machine without control system is available. Drawing force: 100 kN, drawing speed: 80 m/min, material diameter range: 25 mm - 43 mm. An on-site inspection is possible. Nwsdpfov Tctujx Aliji