CNC stružnica

INDEX G400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 640 mm, pomik osi Y: 210 mm, pomik po osi Z: 2.000 mm, moč vretenovega motorja: 67.000 W, skupna višina: 2.591 mm, skupna širina: 2.199 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 6.300 mm, teža orodja: 5.000 g, kot vrtenja osi B (max.): 360 °, kot vrtenja osi C (maks.): 360 °, število osi: 4, This 4-axis horizontal lathe, the Index G 400, was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight of up to 300 kg. Equipped with a high-speed milling spindle with 6,000 rpm and a main spindle speed of 3,000 rpm, it offers robust machining capabilities. Consider the potential of purchasing this horizontal lathe Index G 400. Contact us for further information. Main spindle 0102 with direct drive Maximum material throughput: 102 mm Maximum speed: 3,000 rpm Front bearing diameter: 170 mm Variable hollow shaft motor Power at main spindle D102: Power at 100/40% duty cycle: 53 kW/68 kW Torque: 675 Nm/900 Nm Work spindle orientation and gear shifting D102 2.5° indexing steps by means of index plate Hydraulically actuated through-hole chuck D102 with analog clamping path monitoring Material clearance: 102 mm Stroke: 48 mm Maximum clamping force (tension/compression): 10,900 dN Multi-stage clamping pressure device Clamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. To switch to a lower clamping pressure, a chuck release movement is required. Turret 1 (standard equipment) Cross-slide X, Z, turning length 2000 mm, internal coolant supply with shut-off valve, ball screws D=40 mm on the X-axis, D=50 mm on the Z-axis. Axis drives protected by overload couplings, counterweight system for both X and Z axes Travel range (mm): 320 (X) / 2000 (Z) Rapid traverse speed (m/min): 20 (X) / 40 (Z) Feed force (N): 14,000 (X, Z) X-axis measuring system: Glass scale (absolute) Z-axis: ROQ encoder (absolute) X-Y-Z-B Housing (WT1) Turret with AC motor, positioned via spur gear, hydraulically locked Y-axis quill, hydrostatic bearing, lockable via spur gear Ball screw D=40 mm Overload coupling Travel: 220 mm Rapid traverse speed: 12 m/min Feed force: 24,000 N ROQ encoder (absolute) B-axis drive with AC motor Swivel angle: 360° Tool drive unit with two clutches: Maximum speed: 6,000 rpm Power (25% at n=6,000): 17 kW Maximum torque (25%): 37 Nm Disc turret with 12 stations on cross-slide 1 Tool holder system DIN 69880-40x63 Increased repeat accuracy when changing tools due to additional W-grooves Multifunction unit on cross-slide 1 Maximum speed: 6,000/1,500 rpm Gear ratio: i=4 Torques: 36/144 Nm Tools: SK50 Front bearing diameter: 75 mm Internal coolant supply, disc spring clamping Tool carrier 2, right – X, Z Turning length 2000 mm, preferably for sub-spindle machining with internal coolant supply and shut-off valve, turret controlled via AG motor, ball screws D=50 mm for Z-axis, D=40 mm for X-axis. Axis drives protected by overload couplings, counterweight system. Turret head oriented to the right towards sub-spindle. Dcsdpfx Afsx D D Ecsnod

Stanje: rabljeno, Leto izdelave: 2009, x travel: 1,800 mm y travel: 700 mm z travel: 700 mm CNC control: iTNC 530 Heidenhain Spindle speed range: 20 – 18,000 rpm Main spindle drive power: 25 / 35 kW Max. torque: 130 / 87 Nm Tool holder: HSK A63 DIN 69893 Swiveling B-axis: +/- 100° Dcjdeyhhtgjpfx Afnjd Table clamping surface: 2,100 x 700 mm Max. table load: 1,500 kg Number of T-slots: 7 Table diameter: 750 mm Max. rotary table load: 500 kg Number of T-slots (rotary table): 7 Rotary C-axis: 360° Number of tool stations: 30 positions Tool holder: HSK A63 DIN 69893 Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Max. tool diameter with adjacent stations free: 130 mm Max. tool length: 300 mm Chip-to-chip time: 7.6 sec Rapid traverse (X / Y / Z): 40 m/min Acceleration: 4 m/s² Max. feed rate: 40,000 mm/min Feed force (X / Y / Z): 8 kN Total power requirement: 70 kVA Machine weight approx.: 13.0 t Space requirements approx.: 7.0 x 6.2 x 2.8 m 5-axis CNC travelling column milling machine DECKEL MAHO - DMF 180 New Design - Swivel milling head (B-axis) - Integrated rotary table - Internal coolant supply - Operating hours: Spindle running time: approx. 10,000 h

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Djdpfst U R Hzox Afnecd Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 8 - Number of turret heads: 2 MAIN SPINDLE - Spindle drive power: 53 / 68 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - 1 - Free workpiece length: 2000 [mm] - Max. main spindle chuck diameter: 420 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 50 / 70.5 [kW] - Spindle speed: 3000 [rpm] - Max. bar diameter: 102 [mm] - Rapid traverse speed: 30 [m/min] - Minimum C-axis resolution: 0.001 [degrees] LEFT UPPER TURRET - Number of positions: 12 - Number of driven positions: 12 - Tool holder: VDI 40 - Travel range X/Z: 320 x 2,000 [mm] - Travel range Y: 210 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 17 [kW] RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Tool holder: VDI 40 - Travel range X/Z: 210 x 2,000 [mm] - Driven tool speed: 6000 [rpm] - Driven tool power: 11.3 [kW] ELECTRICAL SUPPLY Dcedpfxouhbpfe Afnod - Supply voltage: 400 [V] - Total power: 137 [kW] WEIGHT AND DIMENSIONS - Floor space required: 9,000 x 3,500 [mm] - Machine height: 3,000 [mm] - Machine weight: 21,000 [kg] MACHINE HOURS - Operating hours: 34,274 [h] EQUIPMENT - Control system: INDEX C200-4D (Siemens 840D) - Coolant tank: KNOLL * with high-pressure pump: 80 [bar] * with paper filter - Automatic doors - Chip conveyor: right

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Dodpewbuyzofx Afnocd

Stanje: novo, Leto izdelave: 2025, - Horizontal capacity: 500 kg Dcedogg Rb Topfx Afnjd - Vertical capacity: 250 kg - Table size: 560 mm - Left door: 170 mm - Electrically tiltable - Foot pedal - Documentation - 230V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.540 mm, premer struženja: 660 mm, moč vretenovega motorja: 30 W, največja hitrost vretena: 3.000 obr/min, izvrtina vretena: 102 mm, potovalna razdalja osi X: 630 mm, pomik osi Y: 300 mm, pomik po osi Z: 1.585 mm, največja hitrost vrtenja: 12.000 obr/min, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 7-osni stružni center RABLJEN s podvretenom, zgornjo nagibno glavo osi Y in menjalcem orodij. Djdpfjx Dc E Ijx Afnecd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Haas Multigrind CB CNC brusilni stroj z več osmi, 12-postajni, krmiljenje Siemens Sinumerik 840D, avtomatsko nalaganje / razlaganje, industrijska filtracijska enota zraka LTA, (leto izdelave 2010) Tehnični podatki: Brusilna vretena (z dvema izhodoma vretena) Vmesnik – stožec ø 31,75 mm Moč 100% / 40 % ED – 11,5 / 14,5 kW Standardna hitrost vrtenja – 8.000 vrt/min Opcija: en izhod vretena Vmesnik – HSK 50E Moč – 100% / 40% ED – 11,5 / 14,5 kW Standardna hitrost vrtenja – 8.000 vrt/min Opcija: en izhod vretena Vmesnik – HSK 50E Moč 100% / 40% ED – 11 / 12 kW Standardna hitrost vrtenja – 18.000 vrt/min Opcija: en izhod vretena Vmesnik – HSK 80E Moč 100% / 40% ED – 30/30 kW Standardna hitrost vrtenja – 8.000 vrt/min Opcija: visoko frekvenčno vreteno – na zahtevo Delovna miza Vpenjalna površina – 1000 x 500 mm Število, razmak in širina T-utorov – 9 / 50 / 12H7 mm Delovno območje X-os – 700 mm (opcija) 1000 mm (opcija) 1200 mm Y-os – 410 mm Dedpfxjv Igg Io Afnscd Z-os – 500 mm C-os – kot vrtenja 320° Opcija: X3 – pomožna os delovno območje – 400 mm Merilni sistem in pomik Ločljivost linearnih osi – 0,0005 mm Hitri pomik linearnih osi – 30.000 mm/min Ločljivost rotacijskih osi – 0,001° Hitrost vrtenja C-osi – 400 vrt/min Rotacijska os (A-os) Standardna višina konice – 175 mm Hitrost vrtenja kot vreteno – 2.600 vrt/min Standardni vmesnik – ISO SK 50 / centriranje 70H5 Opcijsko – HSK 100 / 80 / 63 / 50 Izmenjevalec orodij (opcija) HSK50E Število orodij / premer orodij Notranji segment – 5 / 300 mm do 9 / 100 mm Zunanji segment – 7 / 300 mm do 16 / 100 mm HSK80E Število orodij / premer orodij Notranji segment – 5 / 300 mm do 8 / 100 mm Zunanji segment – 7 / 300 mm do 14 / 100 mm Dimenzije obdelovanca Premer – 340 mm Dolžina – 550 mm Dolžina med konicama – 500 mm Električni priklop Obratovalna napetost 400V / 50 Hz, varovano na 80 A Krmilnik Siemens Sinumerik 840 DSL Pnevmatski sistem Delovni tlak – 6 – 10 bar Teža Skupna teža glede na opremo – 10.000 kg ali več Zahteva po tlorisu Dolžina x širina (standard) – 3.227 x 2.700 mm Višina med obratovanjem – 3.550 mm Višina z opcijo hladilnih šob – 3.810 mm (min. višina hale 4.100 mm)

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 180 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.5 kW - Minimum C-axis resolution: 0.001° BUSHING HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm - Travel X/Y: 50/325 mm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Power-on hours: 31,902 h - Spindle hours: 12,146 h EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank Dcodouha Slopfx Afned * with high-pressure pump * with paper filter - Bar loader: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Stroj je v dobrem stanju in opremljen z nakladalcem ter izmenjevalcem diskov. Dcjdpfx Aex Swyfjfnsd