CNC stružnica

Hyundai Wia KL7000LY

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management Ljdpfx Aasxmhdnecehc - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, Leto izdelave: 2019, Turning diameter: 400 mm Turning length: 584 mm Swing diameter over bed: 750 mm Control: Siemens 828 D Shop Turn Spindle bore: 81 mm Spindle speed: 3,500 rpm Spindle drive: 18.5/22 kW Spindle torque: 410 Nm Number of tools in turret 1: 12 BMT 65 Driven tools: 12 BMT 65 Speed of driven tools: 5,000 rpm Milling spindle drive: MK 5 kW y-axis: +/- 60 mm Rapid traverse: 30/30/10 m/min Tailstock: MK 5 Dimensions (L x W x H): 4.6 x 1.9 x 2.1 m Machine weight: approx. 6.65 t Flat-bed CNC lathe with driven tools and y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box integrated in the door - Signal lamp - 2 + 2 driven tool holders Lhjdpfx Aaeww Nazscsc - Various static tool holders - Flat guides - Tool measurement arm - Programmable tailstock - 23 bar coolant supply - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual pressure clamping

Leto izdelave: 2012, Stanje: generalkompletno obnovljen (rabljeno), MAZAK Laser Cutting System STX510 MkIII 4kW ==EXCELLENT CONDITION – OVERHAULED IN 2023== Year of manufacture: 2012 Very well-maintained, overhauled MAZAK laser machine with 4000W Sheet size: 3000mm x 1500mm Minimum installation footprint: 2.9m x 7.3m Small parts conveyor belt Lhodonwmw Sjpfx Aacoc LAN/USB interface Automatic nozzle changer Automatic focus position adjustment Rapid piercing for thick materials Plasma sensor for stainless steel cutting Piercing sensor for initial penetration Burning sensor for monitoring mild steel cutting Fully enclosed machine cover No foundation required Mild steel: up to 22mm Stainless steel: up to 15mm Aluminum alloy (ALMG): up to 10mm Plastic possible Incl. software Incl. warranty Incl. extraction unit Incl. commissioning & training ===Optionally available with fully automatic loading and unloading===

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 671 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 550 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 35 m/min, hitri pomik os Y: 35 m/min, hitri pomik na osi Z: 35 m/min, proizvajalec krmilnikov: Heidenhain, model krmilnika: Heidenhain TNC7, teža obdelovanca (maks.): 1.100 kg, širina mize: 800 mm, dolžina mize: 616 mm, vrtljajska hitrost (min.): 20 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Heidenhain TNC7 Vreteno HSK-A63 16000 min-1 30 mest za orodja Toga vpenjalna miza 800x616 Notranji dovod hladilne tekočine 40 bar s papirnim tračnim filtrom Strgalačni transporter Lsdpfxeyf E Ato Aacohc Ročni kolešček BLUM LC53-Digilog - prelom/merjenje orodja Merilna tipalka BLUM TC Stroj VKLOP: 671 h, vreteno VKLOP: 61 h Stroj je star približno 6 mesecev. Prodaja po naročilu stranke. Ogled možen po predhodnem dogovoru.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor Ljdpfx Aajuhazgjcjhc - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 77.711 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, hitri pomik na osi Z: 45.000 m/min, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOPLJEN: 77.711 h, vreteno VKLOPLJENO: 16.294 h - Vreteno HSK-A63 10.000 min-1 - 32 mest za orodja - Okrogla miza SRT 280 mm z integriranim sistemom vpenjanja SK50 (če ni potreben, se lahko zapre ali pa se predela v sistem vpenjanja z ničelno točko) - Zunanji dovod hladilne tekočine - Notranji dovod hladilne tekočine s papirnatim tračnim filtrom 80 bar - Pištola za čiščenje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Avtomatska vrata kabine Ledpfxexcp R Ie Aacohc - 32 mest za orodja plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodij Wange - Merilna tipala Renishaw - Posoda za ostružke - Signalna luč Stroj je bil popolnoma preverjen in obstaja geometrijski protokol ter krožni test meritve. Stroj si je možno kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro ohranjen stroj.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Oil Hydraulic Double Column Press 400 T with Sliding Table Press Design: Double column press Thermally neutral: 80 – 120 °C Number of operator sides: 1 side Forces Pressing force, max.: 4000 kN Stripping force, max.: 400 kN Pressure build-up time (closed tool, steel on steel): max. 4 sec. Dimensions: 3,800 mm length x 4,475 mm width Max. opening width: 800 mm Stroke: 800 mm Table height above floor: 1100 mm Height above floor (overall machine height): approx. 4300 mm Minimum hall height: 5500 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection Measured at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight Total weight of the press (without operating fluids and table plate): approx. 28 tons Press table Table size: 1500 x 1500 mm Speeds Fast closing: 100 mm/sec Pressing speed: 8 – 3 mm/sec Sound Pressure Sound pressure level (measured at 1.5 m height at the control panel, per DIN 45635-T16-KL3): max. 78 dB(A) Hydraulics Number of press/drive cylinders: 1 pc. Operating pressure, max.: 300 bar Pressure build-up time (pressing): 4 sec. Pressing stroke pressure accuracy: +/- 3 bar Main pump: BOSCHREXROTH axial piston pump, approx. 145 L/min Oil volume: HLP 46 MW approx. 1000 liters Ambient temperature, max.: 40°C Lhedpfx Aoph Uk Nsacjc Oil temperature, max.: 55°C Preheat temperature: °C Auxiliary pump: BOSCHREXROTH gear pump 10 L/min, pressure maintenance up to 300 sec. Electrical Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic connection main motor: 40 kW Sliding Table Press with 400 T Capacity Closing speed up to 100 mm/sec (adjustable via touchscreen) Opening speed up to 100 mm/sec (adjustable via touchscreen) Initial pressing speed 10 mm/sec (adjustable via touchscreen) Table plate size: 1500 x 1500 mm Ram size: approx. 1600 x 1500 mm Oil temperature monitoring: 55°C warning, 60°C shut-down Automatic lubrication (adjustable via touchscreen) Free positioning of the ram (adjustable via touchscreen) SICK/PILZ light barriers, 14 mm, front, up to 1800 mm height Hydraulic and mechanical ram locks Oil circuit cooling (adjustable via touchscreen) Ejector in table, 20 T pressing force, 350 mm stroke Ejector moves externally with the table Table plate, precision milled, with DIN 22 T-slots Pressure adjustment from 60 T up to 400 T (adjustable via touchscreen) Travel limiter adjustable by pressure or position Setup, single stroke, and cycle operation (adjustable via touchscreen) Swiveling control panel on the cabinet Two-hand operation, with open button, manual/single stroke/cycle switch Assembly, commissioning, operator training at extra charge Control system by SIEMENS (S7 1200), including 9-inch touchscreen monitor. Remote maintenance unit SECOMEA - Ethernet included in scope of supply. Side of the press with two windows (1000 mm high, 800 mm wide) with double doors each. (Sliding table press, hydraulic press, double column press)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 415 mm, stružna dolžina: 850 mm, premer struženja: 390 mm, izvrtina vretena: 105 mm, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 225 mm, pomik po osi Z: 950 mm, hitro pomikanje X-os: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 1.980 mm, skupna dolžina: 4.600 mm, skupna širina: 1.900 mm, premer tulec: 100 mm, poteza s peresom: 120 mm, skupna masa: 7.000 kg, prehod palice: 90 mm, zunanji premer vpenjalne glave: 300 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 828D + Shopturn, Oprema: dokumentacija / priročnik, Maximum turning diameter: 390 mm Z-axis travel: 950 mm Maximum spindle speed: 2,000 rpm AC spindle motor SIEMENS (continuous/15 min): 25/33 kW Bar capacity: 90 mm Spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix mount for driven tools C-axis with spindle clamp and stabilization Wide and robust flat guides 45° slant bed for optimal chip removal Hinged belt chip conveyor with chip bin Kitagawa 3-jaw power chuck ø 300 mm Lhjdpfx Aaofk Et Aocsc Manual tool measurement swing-in Manually adjustable hydraulic tailstock with programmable quill Coolant system with high-performance pump (4 bar) Rittal filter fan on the control cabinet

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.400 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.450 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 42 m/min, hitri pomik os Y: 42 m/min, hitri pomik na osi Z: 42 m/min, največja hitrost vretena: 14.000 obr/min, CNC: Heidenhain 640 DELOVNO PODROČJE Os X: mm 1.450 Os Y: mm 700 Os Z: mm 550 Hitri pomiki (X/Y/Z): m/min 42 Lhodpfjya Imqjx Aacec Največja hitrost vretena: vrt/min 14.000 Vpenjalo orodja: SK 40 Kapaciteta orodjarnika: 30 Dimenzije mize: mm 1.760 × 750 Največja obremenitev mize: kg 2.000 OPREMA: • CNC HEIDENHAIN 640 • Bralnik DXF datotek • Priprava za četrto os • Prednastavitev orodij • Heidenhain merilna sonda za merjenje obdelovanca • Visokotlačna hladilna naprava skozi vreteno 40 bar s papirno filtrirno posodo, kapaciteta 600 litrov • Hladilna miza • Klimatska enota • Orodjarnik s 30 mesti • Navodila za uporabo in CE izjavo o skladnosti

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Diagonalna rezkalna glava z indeksacijo 2,5° x 2,5° Lhsdpfjx I A Hvox Aacoc Število vrtljajev do 6.000 min⁻¹ Orodno vpenjalo SK50 Notranje hlajenje 36 bar Transporter za ostružke v vzdolžni smeri + prečni transporter