DMG MORI - DMC 160H duoBLOCK

DMG MORI DMC 160H duoBLOCK

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, CNC SMOOTH G, hodi 730 x 730 x 730 mm, 2 paleti 500 x 500 mm, hitrost vretena 18000 obr/min, magazin za 120 orodij, max. premer kosa 800 x 1000 mm, hitri pomiki 60 m/min, centralno hlajenje 15 barov, priprava za RENISHAW, rotacijska miza CNC s 360 pozicijami, transporter CONCEP. Nwedpfx Aexcvycog Toc

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Nsdpfx Ajvy Ihdog Tewc Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 330 mm TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 s - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg HOURS OF OPERATION Nwsdpfjuhampex Ag Tsc - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Direct path measuring systems - Coolant tank * with high pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece measuring probe: Renishaw OMP40-2 - Parts removal - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Bar puller

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Os X 5.000 mm Os Y 3.000 mm Os Z 1.500 mm Velikost mize 5.000 x 2.500 mm Vpenjalo orodja HSK 63 Menjalec orodja 60 pozicij Krmiljenje HEIDENHAIN TNC 640 Nwodpfxsx E S E Ns Ag Tjc Vključno z notranjim hlajenjem (IKZ) 40 bar Vključno s simultano vilicasto glavo Vključno s popolno dokumentacijo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Multifunkcijsko CNC stružno-vrtalno-rezkalno središče / Proizvajalec: WFL Tip: M120 MILLTURN x 3000 / Leto izdelave: 2008, prenovljen 2025 TEHNIČNI PODATKI: Nsdpfext Uqhex Ag Tswc Delovno območje: - Razdalja med konicama / dolžina obdelave (odvisna od vpenjala): 3.000 mm - Premer kroženja nad posteljo (največja nazivna mera): 1.220 mm - Premer kroženja nad zgornjim suportom: 1.140 mm Dodatna oprema / konfiguracija: - CNC krmiljenje Siemens SINUMERIK 840D pl - Enota za struženje/ vrtanje / rezkanje - NC-rahločni konjiček - Zunanje orodjarno, 90-kratno - Pick-up postaja - Sistem za hlajenje - Transporter odrezkov - Nadaljnja bogata oprema ... Podrobno tehnično podatkovno listo in informacije o opremi dobite na zahtevo. Brez jamstva za popolnost in pravilnost tehničnih podatkov in opreme.

Leto izdelave: 2000, Stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Nwodpfx Agjt Hw Nye Tsc Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: dober (rabljeno), Leto izdelave: 2021, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 650 mm, pomik po osi Z: 560 mm, nazivna (navidezna) moč: 35 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D sl, širina mize: 650 mm, dolžina mize: 800 mm, največja hitrost vrtenja: 20.000 obr/min, število vreten: 1, število mest v zalogovniku orodij: 120, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 3D merilna tipala SK 40 nova rezkalna vretena Nwsdpfxow Av Hfs Ag Tec število orodnih mest: 120 Quickset

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 87.327 h, Funkcionalnost: popolnoma funkcionalen, We offer you: CNC Machining Centre – Universal Manufacturer: DMG MORI Model: DMU 210P duoBlock µ- Precision Year of manufacture: 2013 Control system: Siemens 840D sl Technical Data: Travel: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Swivel range: 360° Main spindle: Max. speed – main spindle: 18,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool interface: HSK-63A Number of tool stations: 120 positions Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Features & Accessories: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - Tool measurement within the working area, color: BLUM Laser NT Hybrid - KZ 40 bar through the spindle center - Coolant tank 2,500 l - Chip conveyor - Rotating viewing window - Electronic handwheel - 3D path control - Infrared probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-color signal light - Rinsing gun with pump - Operating mode 4 - Machine adaptation for aluminium and glass processing, including: - Linear guides with additional Viton wipers - Ball screws partially with additional Viton/felt wipers - Air seal for all linear measuring systems - Lubrication interval reduced to 10 to 15 minutes (overgreasing) - Adapted maintenance schedule for the steel covers - Interface for camera monitoring and integration into the control system - Machine with vacuum preparation, including: - 2-channel rotary union, special centering bush and cable guidance in T-slots to the table edge - Additional compressed air connection at the edge of the table plate (opposite vacuum connection) - Integration of vacuum monitoring at terminals with NC stop and error message "Vacuum error" - Oil-resistant rubber hose, secured with 2 clamps at the rotary union - Evaluation of the error "Minimum level" in feed and spindle stop - Monitoring of coolant flow for internal and external coolant supply - Machine preparation (cable routing) for the use of the spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides on the X, Y and Z axes were replaced. Nwodpfxjyhbcuo Ag Tjc Accessories, depicted tools and clamping devices are only included in delivery if specified in the additional information. Subject to prior sale. Modifications and errors in technical data and information excepted!

Stanje: rabljeno, Leto izdelave: 2017, Delovne ure: 51.800 h Programske ure: 15.100 h Tehnični podatki: Pomiki/osi X = 800 mm Y = 850 mm Z = 1.050 mm B = 360°, 0,001° Najvišje število obratov: 12.000 1/min Skupna priključna moč: 77 kVA Prostor (DxŠxV): 9.000 x 5.500 x 4.000 mm Teža: 18.100 kg Oprema: - Siemens 840D - Elektronsko ročno kolo - Paket za težko obdelavo - Menjalnik orodij z diskastim magazinom, 180 mest Nedpfx Agjxqp Ivo Tewc - Nosilec orodij HSK 100 - Upravljalna konzola - Notranje hlajenje - Merjenje in nadzor: Renishaw, infrardeči TDS, MPC

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm Nwodpjxuppusfx Ag Tec • Feed: stepless in 3 axes from 0 to 2000 mm/min • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.