Univerzalni obdelovalni center

HURCO VCX600i XP

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Dkodpfst Hw N Tox Abgsp Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Dkjdpfxst Hw H Ee Abgop Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1105842, SPECIFIKACIJA Velikost mize: 914mm x 356mm Največja obremenitev mize: 1361kg X osni pomik: 762mm Y osni pomik: 406mm Z osni pomik: 508mm Vreteno: BT40 Hitrosti vretena: 0-8100min⁻¹ Moč vretena: 14,9kW Hitri podajalni pomik: 25,4m/min Kapaciteta menjalca orodij: 24 +1 orodij Čas menjave orodja: 2,8 sekunde Približna teža: 3500kg STROJ OPREMLJEN Z: 5-osna nagibna miza Haas TRT 160 (odstranljiva) Brezžični intuitivni merilni sistem Daljinski ročni upravljalnik Polž za odvoz ostružkov Visokohitrostna obdelava Programabilna šoba za hlajenje Dksdpfx Abeykqtzogsp Osvetlitev Zaščitni pokrovi Navodila za uporabo

Stanje: rabljeno, Stožerska razdalja min./maks. 0-108 mm Nagibni kot min./maks. 5°/84° Krmilnik GE Fanuc Series 0-GC Delilni premer (razmerje 1:1): 152 mm Delilni premer (razmerje 10:1): 216 mm Premerna razdalja (najfina/groba): 1,3/8,5 Mod. Maks. čelna širina zobnika: 35 mm Območje hitrosti vretena rezila: 41-121 min⁻¹ Območje hitrosti delovnega vretena: 0-33,33 min⁻¹ Teža: 9025 kg Potrebni prostor cca 2707 x 2720 x 2200 mm Oprema/dodatki: - 18 kompletov rezil - Transporter ostružkov - Tehnična dokumentacija Dodeyh Rmmjpfx Abgskp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 38.515 h, največja hitrost vretena: 10.000 obr/min, skupna masa: 6.500 kg, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 426, število osi: 5, Ta petosni stroj HERMLE C 600 U je bil izdelan leta 2000. Ima pomik X-osi 450 mm, Y-osi 300 mm in Z-osi 400 mm, kar omogoča vsestranske možnosti obdelave. Stroj je opremljen z vpenjalnim sistemom orodij HSK 63 in CNC krmiljem Heidenhain iTNC 426 za natančno strojno obdelavo. Če iščete visokokakovostne rešitve za obdelavo, razmislite o nakupu univerzalnega obdelovalnega centra HERMLE C 600 U, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. • Interferenčni krog: 400 mm • Obratovalna napetost: 400 V (3 faze, 50 Hz) • Krmilna napetost: 24 V (DC) • Skupni nazivni tok: 63 A • Skupna nazivna moč: 42 kVA • Vreteno vklopljeno: 38.515 ur • Osi v gibanju: 36.413 ur • Hlajenje skozi vreteno (CTS) • Transporter za odrezke Dedpfx Asyz Tygsbgokp Tehnične specifikacije Konus HSK 63 Hlajenje skozi vreteno: da

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Leto izdelave: 2025 Stanje: Razstavni eksponat Specifikacije: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava Dedpfxew Ty S Se Abgjkp - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 20 kW (27,19 KM), vrsta vhodnega toka: trifazni, vrsta hlajenja: zrak, skupna masa: 281 kg, vhodna napetost: 400 V, skupna širina: 600 mm, skupna dolžina: 1.600 mm, skupna višina: 1.800 mm, trajanje garancije: 6 meseci, ogrevalna zmogljivost: 20 kW (27,19 KM), Zračno hlajen hladilnik/vroče toplotna črpalka SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Hladilna zmogljivost: 20 kW / 5,69 ton (12/7 — 35°C) Ogrevalna zmogljivost: 20 kW / 5,69 ton (40/45 — 7°C) Leto izdelave: 2020 Opcije: Toplotna črpalka, hidravlični modul Hladilni krog: 1 kos Izmenjevalnik toplote: ploščni Kondenzator: baker / aluminij Kompresorji: 1 kos Mitsubishi Electric ANB42FPJMT (scroll) Tip hladilnega sredstva: R410a Število ventilatorjev: 2 kosa Hidravlični modul: 1 kos vodna črpalka EBARA Matrix 5-2T Dimenzije: 1,6 x 0,6 x 1,8 m Teža: 281 kg Delovne ure: 2330 h Stanje: dobro STANJE, TESTIRANJE IN PRIPRAVLJENOST Chiller / Kaltwassersatz / pripomoček prestane sedem stopenj tehničnega pregleda in preverjanja delovnih parametrov. Testira se tudi na naši lastni testni postaji s priklopom na vodo (ali glikol) in nastavitvijo parametrov glede na vaše zahteve. Po testiranju prejmete podrobno poročilo z delovnimi rezultati in celotnim stanjem hladilnika. Dedpjwp Dq Sjfx Abgokp Hladilnik / Kaltwassersatz / je pripravljen za transport in zagon. Naši inženirji vam bodo pomagali pri izračunu hladilne moči, izbiri ustrezne hladilne sheme in konfiguraciji zahtevanih opcij opreme. JAMSTVO IN PODPORA Kakovost opreme je potrjena z garancijo od 6 do 36 mesecev. Naše podjetje lahko dodatno ponudi: - polnjenje hladilnega sredstva; - zamenjavo olja in filtrov; - strokovno tehnično podporo. LOGISTIKA - Možnost svetovne dostave - Pomoč pri nakladanju, izvozni dokumentaciji ter usklajevanju logistike Nudimo podrobno svetovanje. Fotografije, videoposnetki in celotno testno poročilo so na voljo takoj na zahtevo.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 4.9 kW - Spindle speed: 16,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 mm - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 m/min - Feed speed (X/Y/Z): 1 - 30,000 mm/min - Distance from table to spindle nose: 330 - 630 mm TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 - Tool change time: 0.8 sec TABLE - Table size: 800 x 400 mm - Max. table load: 250 kg ELECTRICAL SUPPLY - Supply voltage: 220 V - Total power consumption: 9.5 kVA WEIGHT AND DIMENSIONS - Required space: 2,050 x 2,220 mm - Machine height: 2,497 mm Dksdpfx Absxzu T Sjgsp - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 23,456 h - Operating hours: 16,703 h ACCESSORIES - Controller: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Option: Extended memory 500 MB - Option: High Accuracy Mode BⅡ - Rotary table type: 4th CNC axis integrated * Manufacturer: YUKIWA * Model: DRC170-EU * 4th axis travel: 360° * Minimum 4th axis resolution: 0.001° * Clamping diameter: 140 mm * Center height: 135 mm * With counter bearing * Coolant tank: 150 l * With high pressure pump: 15 bar * With cabin washing - Through-spindle coolant supply (IKZ) - Tool measurement probe - Electrical transformer

Leto izdelave: 2013, stanje: rabljeno, skupna masa: 15.500 kg, skupna dolžina: 4.000 mm, skupna širina: 2.250 mm, skupna višina: 2.810 mm, moč vretenovega motorja: 29.000 W, ALZMETALL GS 1000/5-T CNC 5-Axis Machining Center in robust gantry design with NC swivel rotary table and torque motors for backlash-free and highly dynamic direct drives in the A and C axes. Simultaneous 5-axis machining possible, equipped with 3D interpolation, look-ahead, TCPM, and free contour programming. Water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and spindle air blast, ICS high-pressure system, comprehensive coolant technology with belt filter, high-pressure pump, and chip conveyor. Emulsion mist extraction system (LTA), integrated measuring system with 3D probe (M&H) and laser tool measurement (Blum), collision monitoring (DCM), pick-up tool changer system, automatic central lubrication, LED work area lighting, full enclosure. Weight approx.: 15,500 kg Z-axis travel: 600 mm 5-axis machining: Yes X-axis travel: 800 mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Spindle power: 29 kW A-axis movement: 0 - 140° Spindle speed: 12,000 rpm NC rotary table: Yes Y-axis travel: 800 mm Number of tool positions: 33 Control: Heidenhain iTNC 530 Dksdpfxjy Th U No Abgsp C-axis movement: 360° Clamping area dimensions: 800 x 630 mm Year of construction: 2013 Condition: Fully operational Payment terms: 100% prepayment before collection Delivery terms: Ex foundation Under power: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, potovalna razdalja osi X: 205 mm, pomik osi Y: 105 mm, pomik po osi Z: 560 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 828D, število osi: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multitasking operations, a 12-station turret with driven tools, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder, enabling efficient series production. If you are looking for high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill center we have for sale. Contact us for more details. • Key Features: • Main spindle + sub spindle • Y-axis for multitasking machining • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workpiece clamping capacity (on the machine): • Hydraulic 3-jaw chuck: 170 mm • Scope of delivery: • Transport to customer • Installation and commissioning of the machine • Basic operator training (14 hours) • Main advantages: • Y-axis + sub spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for series production • Automated parts handling → increased productivity Additional Equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20-50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet chuck system, capacity 5-65 mm • Chip conveyor (belt, side discharge) • Parts catcher for sub spindle • Oil skimmer • High-pressure coolant system (5-7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal beacon • Parts handling arm (for unloading the sub spindle) • Tooling package: • 2x straight driven tool holders • 2x angled driven tool holders • 1x extended angle holder • 1x set of turning tool holders Technical Specification Counter Spindle: Yes Driven Tools: Yes Djdpfx Aoy Epi Asbgskp