Brušenje tabele

Hurrican Easy FA 1000

Leto izdelave: 2026, Stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid Rsdpfefyadbex Ag Tep • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: novo, Leto izdelave: 2025, Manual operation with our ultrasonic cleaning technology, featuring an analogue control panel and temperature regulation via a digital thermostat. PRO-series functions can optionally be added. We offer tank capacities from 60 to 7,500 L to meet all requirements. Tank capacity: 110 L External dimensions: 1970 x 670 x 970 mm Redpfof Hqavsx Ag Top Usable basket dimensions: 550 x 350 x 250 mm Ultrasonic frequency: 40 kHz Ultrasonic power: 1,000 W

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal "Wood Dust Tested according to BGI 739-1". YOUR ADVANTAGES - Accessible from 4 sides - Loadable up to 150 kg - Manual, tool-free height adjustment with scale - Recessed longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction port TECHNICAL DATA AST 1.5 BASIC - Extraction port: 140 / 160 mm - Required extraction capacity: 1,500 m³/h - Negative pressure at port at 22 m/s: 1,000 Pa at DN140 mm / 700 Pa at DN160 mm - Working height adjustable from: 735–1,015 mm - Working surface (W x L): 946 x 1,500 mm - Dimensions (W x L): 1,000 x 1,600 mm Rjdedqzhbopfx Ag Tsp - Weight: approx. 73 kg

Stanje: novo, Table height: 650 - 1050 mm Rjdofk Aivepfx Ag Tjp Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Leto izdelave: 2024, nosilnost: 1.500 kg, Special Price Promotion: €2,000 Discount Perforated Table 1200 x 2400 x 200 mm Tabletop Thickness: 20 mm, Hole Diameter: 28 mm Swivel Range: 360° Height Adjustment: Hydraulic Motor, 800 to 1200 mm Rotational Speed: 0.5 rpm Motor Power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity 500 kg, Dimensions: 1000 x 1500 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1000 kg, Dimensions: 1000 x 2000 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1500 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 2000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 3000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 5000 kg, Dimensions: 1500 x 3000 x 200 mm, 28 mm holes, with manual or automatic height adjustment Rjdjuua Inepfx Ag Tjp

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Rodpfx Asgrvwfsg Tsp Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special workbench systems from the SST, SFT and SWT series (fixed series) serve as 3D clamping workstations for the efficient production of assemblies, welded structures, and bonded constructions, e.g. jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, thus enabling the high-quality production of small and medium series. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. In addition, the table top is marked with a 100 x 100 mm grid for easy alignment of workpieces or fixtures. The table perforation allows for the use of various clamping elements and positioning aids. For special applications, the table top surface can, as an option to the standard, also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures long-term sustainability of the table system. Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Leto izdelave: 2020, Stanje: novo, Ultrasonic cleaning machines for washing, phosphating, chromating, degreasing, and removing paint coatings Materials ROMER ultrasonic cleaning systems use stainless steel to provide protection against acids. The tanks feature an additional insulation layer to minimize heat loss and enable faster heating. Premium materials ensure a long service life for the vibrating components. Rsdsfzk Ewopfx Ag Tep Heating System The heating elements installed in ROMER tanks are made from top-quality materials and high-temperature-resistant ceramic components. The implemented heating system provides a high thermal efficiency; hot water automatically mixes with cold water, ensuring the entire tank is evenly heated. Ultrasonic Transducers The ultrasonic transducers used in ROMER systems are mounted in submersible modules, which enhance vibration transmission and are easily replaceable. The ultrasonic frequency range is 20–40 kHz, depending on the parts being cleaned—lower frequencies are used for large, high-strength components, while higher frequencies are used for jewelry, delicate mechanical assemblies, etc. All transducers are connected with high-temperature-resistant cables.

Stanje: novo, Quantity: 10 units Weight: 30 kg Condition: new Bore diameter: 28 mm 10-meter pieces of screw clamps Throat depth: 120 mm Length: 300 mm Condition: new Bore diameter: 28 mm Redsvn U Hcepfx Ag Top

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 7.583 h, vrsta upravljanja: CNC krmiljenje, proizvajalec krmilnikov: Bosch-Rexroth, model krmilnika: Rexroth IndraMotion MTX, vrsta laserja: diodni laser, proizvajalec laserskih virov: TRUMPF, model laserskega vira: TruDisk 3000, laserske ure: 7.583 h, laserska moč: 3.000 W, prebijalna sila: 16 t, prebojni premer: 76 mm, najv. debelina jeklene pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 60 m/min, skupna masa: 13.200 kg, Oprema: CE označba, hladilna enota, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, Advanced machine equipment - Multitool function - MultiBend function - Thread forming function with thread counter Thread former breakage control Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and rolling technology function Additional machine features - 1x additional hydraulic clamping claw Data transmission - Wireless Operation Point - Mobile app control Standard equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping claws and tools - Hydraulic clamping claws (3 units) - Drives with maintenance-free three-phase motors - Restraining device with programmable hold-down - Foot pedal for closing clamping claws - Radiation shield with direct access - Part chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Prepared for SortMaster Compact retrofit - Protective tool - Transport and assembly fixture TRUMPF Laser - Laser light cable (LLK) as per standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for the TruDisk Compact cutting unit - Solid-state laser compact cutting unit - Protective window - Collision protection - ControlLine Punching head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punches - Slug extraction for punching - Forming function - Stroke counter for punches Control system - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE certification - Two-beam safety light barrier Enhanced standard equipment - Solid-state laser TruDisk 3001 with 1 LLK output - Cooling unit (water - air) - Compact extraction system - 1st locating pin (inside right) - Ball tables Redpfoyic Sdjx Ag Top - Good parts container for part chute - Chip container for rear removal

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Extraction table without rear/side walls Technical data: Working surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2,250 mm (including power strip) Rsdpsuzf Ihsfx Ag Tep Power strip with tool tray: 2x 230 V sockets with hinged cover, 2x compressed air couplings, power cable and main switch Extraction port Ø 160 mm, with rim