HSM V-Press 605 stiskalnica/balirka.

HSM V-PRESS 605 400V

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Ihedpopn I H Tjfx Af Tot Znamka: Svedala Tip: 36/H/MC Vklj.: osnovno šasijo in oljno enoto

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Ihedsvwlqqopfx Af Tst Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Isdpfxsu Nw Ezj Af Tjht Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. Ihedpfsh Nyfysx Af Tjt For further information, please contact: +48 539 660 495.

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno),

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, - Concasseur à percussion primaire, marque Laron, modèle IM 16 - Ensemble complet disponible en version mobile ou stationnaire. - Roulements du rotor neufs - Barres de percussion du rotor neuves - Platine frontale presque neuve - Capacité de production : 800 t/h - Ouverture d’alimentation : 2320 x 1700 mm. Moteur de 600 ch. - Roulements et supports neufs - Barres de percussion du rotor neuves - Alimentateur à tablier articulé : largeur 2 000 mm, longueur 10 000 mm. Réducteur et moteur 40 ch. État de l’alimentateur : quasi neuf. Ihjdpfx Afeimwg Hj Tet - Pré-tamiseur à disques : largeur 2 000 mm, diamètre 1 000 mm. Réducteur et moteur électrique. - Trémie d’une capacité de 40 m³. Assemblée boulonnée, démontable en plusieurs morceaux pour le transport. - L’ensemble est monté sur un châssis doté d’une attache pour tracteur routier et transportable sur essieux dolly. Nous disposons également de broyeurs secondaires à marteaux, de cribles et de convoyeurs pour compléter une installation clé en main.

Stanje: dober (rabljeno), Ponujamo rabljeni dvojni čeljustni drobilnik znamke Krupp. Dobro ohranjen, popolnoma delujoč. 500 x 300 mm, 15 kW, nova orodja. Motor je trenutno v prenovi. Ihjdpfx Aewy U Icsf Tet

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF200MK is the ideal multi-chamber baler for compacting your loose cardboard and film waste into bales weighing up to 200 kg. Different materials can be collected in two or more adjoining press chambers, and once a chamber is full, the movable press head is simply rolled over it and the material is compacted. By compressing this waste/recyclable material, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 16 tonnes Bale weight: up to 200 kg (depending on material) Bale size: 1000 H (var.) x 1100 W x 800 D mm Machine dimensions: 2506 H x 3260 W x 1269 D mm Machine weight: 1400 kg Transport height: 2506 mm Filling opening: 1100 W x 800 H mm Press cycle time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retention claws to minimise material spring-back Short handling times as a chamber is always available for loading Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Foils Ihjdpfx Ajvugz Esf Tst Big bags Textiles Light recyclables Additional options: Annual maintenance including safety inspection (UVV) Machine colour to RAL specification PLC control with automatic press cycle, bale-ready indicator, and key-operated emergency stop Additional press chambers (up to a total of 6) Strapping bands Power supply 380 - 400 V (3 phases) Double chamber baler, baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, waste press, recycling press, waste compactor, rubbish press, residual waste press

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Ihsdera A E Ujpfx Af Tjt Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Leto izdelave: 2009, Stanje: skoraj kot novo (rabljeno), Presa cu container Motor 5,5 kW 400 V Ihjdpefhb Tiefx Af Tst