Drobilnik stožcev Svedala

Stanje: pripravljen za uporabo (rabljen), Bobenski motorji Ffsdoi A Apuopfx Aflot rabljeni bobenski motorji velika zaloga za širino traku 300-1400 mm

Stanje: rabljeno, Leto izdelave: 2003, obratovalne ure: 23.000 h, Oprema: pogon na vsa štiri kolesa, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FORESTRY/TIMBER !!! Year of manufacture: 2003 23,000 operating hours New pump with invoice: €16,200 New engine with invoice: €17,700 Ffodpfsvm N Dtox Aflot 16-ton winch with remote control Flotation tyres Hiab timber grab, year 2016 Phone: We arrange your financing or leasing EU sales: net, upon presentation of company documents and VAT number Non-EU sales: €500 deposit We speak English We speak Serbo-Croatian Our services for you: * Export documents and EUR1 * Temporary license plates * Worldwide transport * Overnight accommodation * Transfer from Munich Airport or Passau train station Phone:

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 14320, baling press / paper baler Ffsdpfx Afoiuky Islot

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available. Ffedpfx Afsd E A I Islst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 14.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 33.000 kg, moč: 264 kW (358,94 KM), vrtljajska hitrost (min.): 70 obr/min, vhodna napetost: 400 V, Slow-running robust single-shaft shredder suitable for the pre-shredding of various materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal or material recycling, either loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements (mm) Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 50 Hz : 87 rpm Number of rotor knives: 84 pcs Knife dimensions: 172 x 57 x 28 mm Counter knives below: 6 pcs Stripping comb above: 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediate Fedpsv S Hyvofx Afljft Two discharge conveyors available as option.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Fsdjvwlqqspfx Aflsft Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: novo, Parallel lathe with Fervi T075/400V3A digital readout. Monobloc cast iron bed. Centre height: 230 mm Max. swing over bed: 460 mm Ffodpfjvbqv Hjx Aflot Max. swing over carriage: 270 mm Max. swing in gap: 690 mm Tool height: 25 mm Distance between centres: 1500 mm Distance between guides: 300 mm Spindle bore taper: MT7 Spindle bore: 58 mm Spindle nose: Camlock D1-8 Spindle speeds (12): 25–1700 rpm Longitudinal feeds (42): 0.031–1.7 mm/rev Cross feeds (42): 0.014–0.784 mm/rev Metric threads (41): 0.1–14 mm Inch threads (60): 2–112 TPI Tailstock quill stroke: 130 mm Tailstock taper: MT4 Motor: 400 V 50 Hz 5.5 kW Coolant pump: 400 V 50 Hz 90 W Machine dimensions: 2750 x 1080 x 1370 mm Net weight: 2020 kg Total dimensions: 2870 x 1180 x 1570 mm Gross weight: 2200 kg Included accessories: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Faceplate Ø350 mm Fixed stead rest Travelling (follow) steady rest Reducing sleeve MT 7/4 Fixed tailstock centre MT 4 Rotating tailstock centre MT 4 Threading dial indicator Quick-change tool post guard Spindle guard Rear splash guard Type B quick-change tool post LED light Coolant system Electromechanical foot brake Carriage gears in oil bath Rapid-lock tailstock carriage

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Ffodpjh Nyfysfx Aflst

Stanje: dober (rabljeno), 10,000 Pieces of Insert Grating / Wire Mesh Decks for Pallet Racking, Galvanised Finish Insert gratings are available in various dimensions, mesh widths, bar specs, and load capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Insert Grating Mesh Size Load Bar Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm Fedpsd Hvvgjfx Afleft 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used equipment in excellent condition, see photos. Item is in stock. Transportation available on request. Inspection possible by appointment at any time. Further information available on request. Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times. (Technical specifications, information, prices, and prior sale subject to change. Please see our General Terms and Conditions. All prices are exclusive of VAT, ex works.) Purchase/Sale We are always seeking and offering a wide variety of items from various categories: - broom-clean facility liquidations - business closures - Fast – flexible – efficient! We also clear and/or dispose of inventory for insolvency administrators. Please contact us with key details and we will respond promptly. To visit our website, please click on our logo!

Stanje: pripravljen za uporabo (rabljen), Čeljustni drobilnik Kleemann Znamka: Kleemann Tip: SSTR 1250 Vhodna odprtina: 1250 x 950 mm Vključuje: Elektromotor Teža pribl. 38 ton Ffsdou S Tqvepfx Aflot