Stiskalnica za bale

HSM 820 plus

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (X/Y/Z): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is malfunctioning due to moisture and should be inspected. Nsdoip D Rpjpfx Abnsli

Stanje: pripravljen za uporabo (rabljen), Model: Balirka HSM V-press 1160 plus Njdpfjra Nyuex Abnjli Pritisk (kN): 532 Učinkovitost (bale/uro): 1-2 Maks. velikost bale (mm): 1200x1100x1000-1200 Dimenzije d x š x v (mm): 1780x1150x2985 Moč (kW): 7,5 Letnik 2007-2008, cena 5500 EUR Letnik 2009-2010, cena 5800 EUR Letnik 2011-2013, cena 6300 EUR Na voljo tudi balirke HSM v press 1160 max, letnik 2014-2015 Teža (kg): 2300 NA VOLJO TUDI LETNIKI 2017-2018 - 7500 EUR

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Nlodpokcgf Hjfx Abnsi Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Leto izdelave: 2012, Stanje: dober (rabljeno), Manufacturer: Gipo AG Model: B 1370 Year of manufacture: 2012 Feed opening size: 1,320 x 680 mm Includes: - Frame - Pre-screen Nodpsilh Efofx Abnjli - Electric motors for crusher and pre-screen. Spare jaws in stock!

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. Njdpeh Nyfyefx Abnoli For further information, please contact: +48 539 660 495.

Stanje: pripravljen za uporabo (rabljen), Stožčasti drobilnik Svedala Znamka: Svedala Tip: 36/H/MC Vključuje: osnovno šasijo in oljno enoto Njdpfopn I H Tjx Abnoli

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Nlodovwlqqspfx Abnsi Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, | Model | Lokomo C-140B Čeljustni drobilnik | | Vhodna odprtina (širina × višina) | cca 1400 mm × 1000 mm | | Največja vhodna velikost kosa | cca 600-800 mm | | Trdnost materiala za drobljenje (npr. kamenina) | ~200 MPa (odvisno od materiala) | | Zmogljivost (pretok) | ocenjena 400 t/h | Nlsdexcg Spspfx Abnji | Moč motorja | 200 kW | | Težnostni razpon | 55 ton |

Leto izdelave: 2001, Stanje: dober (rabljeno), HSM-500.1_VL BALER PAPER BALER FILM BALER Immediately operational, good CONDITION Used & good / see photos Model: HSM 500.1 VL Machine No.: 6135.244.P Serial No.: 220109689 Press force: 50 tons Voltage: 400V; Frequency: 50 Hz Power: 7.5 kW Current: 15.5 A Compression force: 6 tons Year of manufacture: 2001 Additional balers available in our other listings Item used and in good condition / roughly cleaned (Plug in and ready to operate) Dimensions: On request!! Additional photos show potential usage options. All items visible in the photos are also available from us. Price quoted is net per unit Ex works 47441 Moers Current stock: 1 unit Inspection is expressly offered. More machinery in stock See photos or enquire by phone General information: We offer items acquired from various liquidations, described to the best of our ability, and provide clear photos. Further details about the item cannot be provided. We offer the opportunity for viewing by appointment on Tuesdays and Thursdays between 9 am and 4 pm. If needed, the item can be taken immediately. Nodpfjlc Du Njx Abnsli We can only respond to enquiries about this listing if you provide a telephone number due to time constraints. Unless explicitly stated otherwise, this listing concerns USED GOODS. Packaging may be damaged. Items have been visually inspected and are technically sound as far as can be determined. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. If interested, feel free to call. All dimensions are approximate. Errors and omissions excepted.

Stanje: pripravljen za uporabo (rabljen), HSM V-Press 860 baler, year 2005-2009, price: €5,600 Pressing force: 54 kN Nledera Rbgjpfx Abnei Unit pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: Wire Pressable materials: Foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 ex demo, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000 – 1,200 Bale weight (approx.): 500 kg Technical data: Dimensions (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle time (s): 35 Press force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/Frequency: 400 V / 50 Hz Motor power: 4 kW Feed opening (W x H): 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Loading method: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: Wire Pressable material: Film, cardboard Idle cycle time: 25 s